[U-Boot] [PATCH 1/2] ARM: mxs: Rename M28EVK

Wed Apr 5 11:31:01 UTC 2017

The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex at denx.de>
---
 arch/arm/Kconfig                         | 2 +-
 board/{denx => aries}/m28evk/Kconfig     | 2 +-
 board/{denx => aries}/m28evk/MAINTAINERS | 2 +-
 board/{denx => aries}/m28evk/Makefile    | 0
 board/{denx => aries}/m28evk/README      | 6 +++---
 board/{denx => aries}/m28evk/m28evk.c    | 6 +++---
 board/{denx => aries}/m28evk/spl_boot.c  | 6 +++---
 doc/README.mxs                           | 2 +-
 drivers/video/mxsfb.c                    | 2 +-
 scripts/config_whitelist.txt             | 2 +-
 10 files changed, 15 insertions(+), 15 deletions(-)
 rename board/{denx => aries}/m28evk/Kconfig (89%)
 rename board/{denx => aries}/m28evk/MAINTAINERS (84%)
 rename board/{denx => aries}/m28evk/Makefile (100%)
 rename board/{denx => aries}/m28evk/README (82%)
 rename board/{denx => aries}/m28evk/m28evk.c (96%)
 rename board/{denx => aries}/m28evk/spl_boot.c (98%)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e644ee3..acfb95a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1238,6 +1238,7 @@ source "arch/arm/cpu/armv8/Kconfig"
 
 source "arch/arm/imx-common/Kconfig"
 
+source "board/aries/m28evk/Kconfig"
 source "board/bosch/shc/Kconfig"
 source "board/BuR/brxre1/Kconfig"
 source "board/BuR/brppt1/Kconfig"
@@ -1258,7 +1259,6 @@ source "board/cirrus/edb93xx/Kconfig"
 source "board/compulab/cm_t335/Kconfig"
 source "board/compulab/cm_t43/Kconfig"
 source "board/creative/xfi3/Kconfig"
-source "board/denx/m28evk/Kconfig"
 source "board/denx/m53evk/Kconfig"
 source "board/freescale/ls2080a/Kconfig"
 source "board/freescale/ls2080aqds/Kconfig"
diff --git a/board/denx/m28evk/Kconfig b/board/aries/m28evk/Kconfig
similarity index 89%
rename from board/denx/m28evk/Kconfig
rename to board/aries/m28evk/Kconfig
index dd4dc4d..ab5577c 100644
--- a/board/denx/m28evk/Kconfig
+++ b/board/aries/m28evk/Kconfig
@@ -4,7 +4,7 @@ config SYS_BOARD
 	default "m28evk"
 
 config SYS_VENDOR
-	default "denx"
+	default "aries"
 
 config SYS_SOC
 	default "mxs"
diff --git a/board/denx/m28evk/MAINTAINERS b/board/aries/m28evk/MAINTAINERS
similarity index 84%
rename from board/denx/m28evk/MAINTAINERS
rename to board/aries/m28evk/MAINTAINERS
index b0535a9..f600e7d 100644
--- a/board/denx/m28evk/MAINTAINERS
+++ b/board/aries/m28evk/MAINTAINERS
@@ -1,6 +1,6 @@
 M28EVK BOARD
 M:	Marek Vasut <marek.vasut at gmail.com>
 S:	Maintained
-F:	board/denx/m28evk/
+F:	board/aries/m28evk/
 F:	include/configs/m28evk.h
 F:	configs/m28evk_defconfig
diff --git a/board/denx/m28evk/Makefile b/board/aries/m28evk/Makefile
similarity index 100%
rename from board/denx/m28evk/Makefile
rename to board/aries/m28evk/Makefile
diff --git a/board/denx/m28evk/README b/board/aries/m28evk/README
similarity index 82%
rename from board/denx/m28evk/README
rename to board/aries/m28evk/README
index cb3ae20..9f0d995 100644
--- a/board/denx/m28evk/README
+++ b/board/aries/m28evk/README
@@ -1,12 +1,12 @@
-DENX M28EVK
-===========
+Aries M28EVK
+============
 
 Files of the M28/M28EVK port
 ----------------------------
 
 arch/arm/cpu/arm926ejs/mxs/	- The CPU support code for the Freescale i.MX28
 arch/arm/include/asm/arch-mxs/	- Header files for the Freescale i.MX28
-board/denx/m28evk/		- M28EVK board specific files
+board/aries/m28evk/		- M28EVK board specific files
 include/configs/m28evk.h	- M28EVK configuration file
 
 Follow the instructions from doc/README.mxs to generate a bootable SD card or to
diff --git a/board/denx/m28evk/m28evk.c b/board/aries/m28evk/m28evk.c
similarity index 96%
rename from board/denx/m28evk/m28evk.c
rename to board/aries/m28evk/m28evk.c
index 33d38cf..c990ea9 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/aries/m28evk/m28evk.c
@@ -1,5 +1,5 @@
 /*
- * DENX M28 module
+ * Aries M28 module
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
  * on behalf of DENX Software Engineering GmbH
@@ -93,7 +93,7 @@ int board_mmc_init(bd_t *bis)
 
 int fecmxc_mii_postcall(int phy)
 {
-#if	defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10)
+#if	defined(CONFIG_ARIES_M28_V11) || defined(CONFIG_ARIES_M28_V10)
 	/* KZ8031 PHY on old boards. */
 	const uint32_t freq = 0x0080;
 #else
@@ -123,7 +123,7 @@ int board_eth_init(bd_t *bis)
 		CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
 		CLKCTRL_ENET_TIME_SEL_RMII_CLK);
 
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
 	/* Reset the new PHY */
 	gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
 	udelay(10000);
diff --git a/board/denx/m28evk/spl_boot.c b/board/aries/m28evk/spl_boot.c
similarity index 98%
rename from board/denx/m28evk/spl_boot.c
rename to board/aries/m28evk/spl_boot.c
index 5a1010e..e27a74e 100644
--- a/board/denx/m28evk/spl_boot.c
+++ b/board/aries/m28evk/spl_boot.c
@@ -1,5 +1,5 @@
 /*
- * DENX M28 Boot setup
+ * ARIES M28 Boot setup
  *
  * Copyright (C) 2011 Marek Vasut <marek.vasut at gmail.com>
  * on behalf of DENX Software Engineering GmbH
@@ -56,7 +56,7 @@ const iomux_cfg_t iomux_setup[] = {
 	MX28_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
 
 	/* UART1 */
-#ifdef	CONFIG_DENX_M28_V10
+#ifdef	CONFIG_ARIES_M28_V10
 	MX28_PAD_AUART0_CTS__DUART_RX,
 	MX28_PAD_AUART0_RTS__DUART_TX,
 #else
@@ -132,7 +132,7 @@ const iomux_cfg_t iomux_setup[] = {
 	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
 	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
 	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
-#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
+#if !defined(CONFIG_ARIES_M28_V11) && !defined(CONFIG_ARIES_M28_V10)
 	MX28_PAD_AUART2_RTS__GPIO_3_11,	/* PHY reset */
 #endif
 
diff --git a/doc/README.mxs b/doc/README.mxs
index 4edf19f..e23ab9c 100644
--- a/doc/README.mxs
+++ b/doc/README.mxs
@@ -95,7 +95,7 @@ Next, configure U-Boot for a MXS based board
 
 Examples:
 
-1. For building U-Boot for Denx M28EVK board:
+1. For building U-Boot for Aries M28EVK board:
 
 	$ make m28evk_config
 
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 32ecbe2..20455ff 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -36,7 +36,7 @@ __weak void mxsfb_system_setup(void)
 }
 
 /*
- * DENX M28EVK:
+ * ARIES M28EVK:
  * setenv videomode
  * video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,
  *       le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,vmode:0
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 668f238..9f32cb2 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -127,6 +127,7 @@ CONFIG_ARC_SERIAL
 CONFIG_ARC_UART_BASE
 CONFIG_ARIA
 CONFIG_ARIA_FPGA
+CONFIG_ARIES_M28_V10
 CONFIG_ARM926EJS
 CONFIG_ARMADA100
 CONFIG_ARMADA100_FEC
@@ -727,7 +728,6 @@ CONFIG_DEFAULT_SPI_CS
 CONFIG_DEFAULT_SPI_MODE
 CONFIG_DEF_HWCONFIG
 CONFIG_DELAY_ENVIRONMENT
-CONFIG_DENX_M28_V10
 CONFIG_DESIGNWARE_ETH
 CONFIG_DESIGNWARE_WATCHDOG
 CONFIG_DEVCONCENTER
-- 
2.10.2

