[U-Boot] [PATCH] arm64: mvebu: armada-7040-db: Enable 10GB port 0 / SFI (KR)

Stefan Roese sr at denx.de
Thu Apr 6 13:39:07 UTC 2017


This patch enables the mvpp2 port 0 usage on the Armada 7k DB by setting
the correct PHY type (KR / SFI) for the COMPHY driver and enabling the
ethernet0 device node in the dts.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Stefan Chulski <stefanc at marvell.com>
Cc: Kostya Porotchkin <kostap at marvell.com>
Cc: Nadav Haklai <nadavh at marvell.com>
---
 arch/arm/dts/armada-7040-db.dts | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/armada-7040-db.dts b/arch/arm/dts/armada-7040-db.dts
index 84e0dbdc3d..54b888ac22 100644
--- a/arch/arm/dts/armada-7040-db.dts
+++ b/arch/arm/dts/armada-7040-db.dts
@@ -168,8 +168,7 @@
 	};
 
 	phy2 {
-		phy-type = <PHY_TYPE_SGMII0>;
-		phy-speed = <PHY_SPEED_1_25G>;
+		phy-type = <PHY_TYPE_KR>;
 	};
 
 	phy3 {
@@ -223,6 +222,11 @@
 	status = "okay";
 };
 
+&cpm_eth0 {
+	status = "okay";
+	phy-mode = "sfi"; /* lane-2 */
+};
+
 &cpm_eth1 {
 	status = "okay";
 	phy = <&phy0>;
-- 
2.12.2



More information about the U-Boot mailing list