[U-Boot] [PATCH v3 2/2] usb: dwc3: gadget: make cache-maintenance on event buffers more robust

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Thu Apr 6 14:58:53 UTC 2017


Merely using dma_alloc_coherent does not ensure that there is no stale
data left in the caches for the allocated DMA buffer (i.e. that the
affected cacheline may still be dirty).

The original code was doing the following (on AArch64, which
translates a 'flush' into a 'clean + invalidate'):
  # during initialisation:
      1. allocate buffers via memalign
      	 => buffers may still be modified (cached, dirty)
  # during interrupt processing
      2. clean + invalidate buffers
      	 => may commit stale data from a modified cacheline
      3. read from buffers

This could lead to garbage info being written to buffers before
reading them during even-processing.

To make the event processing more robust, we use the following sequence
for the cache-maintenance:
  # during initialisation:
      1. allocate buffers via memalign
      2. clean + invalidate buffers
      	 (we only need the 'invalidate' part, but dwc3_flush_cache()
	  always performs a 'clean + invalidate')
  # during interrupt processing
      3. read the buffers
      	 (we know these lines are not cached, due to the previous
	  invalidation and no other code touching them in-between)
      4. clean + invalidate buffers
      	 => writes back any modification we may have made during event
	    processing and ensures that the lines are not in the cache
	    the next time we enter interrupt processing

Note that with the original sequence, we observe reproducible
(depending on the cache state: i.e. running dhcp/usb start before will
upset caches to get us around this) issues in the event processing (a
fatal synchronous abort in dwc3_gadget_uboot_handle_interrupt on the
first time interrupt handling is invoked) when running USB mass
storage emulation on our RK3399-Q7 with data-caches on.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

---

Changes in v3: None
Changes in v2: None

 drivers/usb/dwc3/core.c   | 2 ++
 drivers/usb/dwc3/gadget.c | 5 +++--
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b2c7eb1..1cbf179 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -125,6 +125,8 @@ static struct dwc3_event_buffer *dwc3_alloc_one_event_buffer(struct dwc3 *dwc,
 	if (!evt->buf)
 		return ERR_PTR(-ENOMEM);
 
+	dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
+
 	return evt;
 }
 
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8c53cc0..e065c5a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2668,11 +2668,12 @@ void dwc3_gadget_uboot_handle_interrupt(struct dwc3 *dwc)
 		int i;
 		struct dwc3_event_buffer *evt;
 
+		dwc3_thread_interrupt(0, dwc);
+
+		/* Clean + Invalidate the buffers after touching them */
 		for (i = 0; i < dwc->num_event_buffers; i++) {
 			evt = dwc->ev_buffs[i];
 			dwc3_flush_cache((uintptr_t)evt->buf, evt->length);
 		}
-
-		dwc3_thread_interrupt(0, dwc);
 	}
 }
-- 
1.9.1



More information about the U-Boot mailing list