[U-Boot] [PATCH] debug_uart: Try not to use stack in printch

Tim Chick tim.chick at mediatek.com
Thu Apr 6 15:32:41 UTC 2017


Spam detection software, running on the system "lists.denx.de",
has identified this incoming email as possible spam.  The original
message has been attached to this so you can view it or label
similar future email.  If you have any questions, see
@@CONTACT_ADDRESS@@ for details.

Content preview:  Previous change to create _printch causes the stack to be
  used, breaking printch before stack is available. Inline _printch to prevent
   this happening. Signed-off-by: Tim Chick <tim.chick at mediatek.com> --- [...]
   

Content analysis details:   (6.3 points, 5.0 required)

 pts rule name              description
---- ---------------------- --------------------------------------------------
 0.7 RCVD_IN_XBL            RBL: Received via a relay in Spamhaus XBL
                            [188.29.165.105 listed in zen.spamhaus.org]
 3.6 RCVD_IN_PBL            RBL: Received via a relay in Spamhaus PBL
 1.6 RCVD_IN_BRBL_LASTEXT   RBL: No description available.
                            [188.29.165.105 listed in bb.barracudacentral.org]
 0.4 RDNS_DYNAMIC           Delivered to internal network by host with
                            dynamic-looking rDNS


-------------- next part --------------
An embedded message was scrubbed...
From: Tim Chick <tim.chick at mediatek.com>
Subject: [PATCH] debug_uart: Try not to use stack in printch
Date: Thu,  6 Apr 2017 16:32:41 +0100
Size: 1696
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170406/c2ac6b54/attachment.mht>


More information about the U-Boot mailing list