[U-Boot] [PATCH] Remove various unused interrupt related code
Tom Rini
trini at konsulko.com
Fri Apr 7 02:36:47 UTC 2017
With d53ecad92f06 some unused interrupt related code was removed.
However all of these options are currently unused. Rather than migrate
some of these options to Kconfig we just remove the code in question.
The only related code changes here are that in some cases we use
CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename
and move the value local to the code in question.
Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi")
Signed-off-by: Tom Rini <trini at konsulko.com>
---
arch/arm/cpu/arm720t/interrupts.c | 6 ---
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/s3c24x0/Makefile | 1 -
arch/arm/cpu/sa1100/cpu.c | 4 --
arch/arm/lib/interrupts.c | 73 ----------------------------------
arch/arm/lib/stack.c | 8 ----
arch/arm/lib/vectors.S | 33 ---------------
arch/arm/mach-davinci/misc.c | 2 -
arch/arm/mach-keystone/cmd_ddr3.c | 3 +-
arch/avr32/cpu/exception.c | 4 +-
arch/nds32/cpu/n1213/start.S | 18 ---------
board/Barix/ipam390/ipam390.c | 2 -
board/davinci/da8xxevm/da850evm.c | 2 -
board/davinci/da8xxevm/omapl138_lcdk.c | 2 -
board/davinci/ea20/ea20.c | 2 -
board/lego/ev3/legoev3.c | 2 -
board/omicron/calimain/calimain.c | 2 -
common/board_f.c | 5 ---
drivers/net/enc28j60.c | 17 --------
include/configs/advantech_dms-ba16.h | 1 -
include/configs/am335x_igep0033.h | 3 --
include/configs/aristainetos-common.h | 2 -
include/configs/atngw100.h | 2 -
include/configs/atngw100mkii.h | 2 -
include/configs/atstk1002.h | 2 -
include/configs/bcm23550_w1d.h | 1 -
include/configs/bcm28155_ap.h | 1 -
include/configs/bcm_ep_board.h | 1 -
include/configs/cm_fx6.h | 1 -
include/configs/colibri_imx7.h | 2 -
include/configs/colibri_vf.h | 6 ---
include/configs/edb93xx.h | 7 ----
include/configs/el6x_common.h | 2 -
include/configs/embestmx6boards.h | 2 -
include/configs/ge_bx50v3.h | 1 -
include/configs/grasshopper.h | 3 --
include/configs/liteboard.h | 1 -
include/configs/ls1021aiot.h | 6 ---
include/configs/ls1021aqds.h | 6 ---
include/configs/ls1021atwr.h | 6 ---
include/configs/ls1043aqds.h | 6 ---
include/configs/ls1046aqds.h | 6 ---
include/configs/mx6sabre_common.h | 2 -
include/configs/mx6slevk.h | 2 -
include/configs/mx6sllevk.h | 2 -
include/configs/mx6sxsabreauto.h | 2 -
include/configs/mx6sxsabresd.h | 2 -
include/configs/mx6ul_14x14_evk.h | 1 -
include/configs/mx6ullevk.h | 2 -
include/configs/mx7dsabresd.h | 2 -
include/configs/mx7ulp_evk.h | 1 -
include/configs/nokia_rx51.h | 8 ----
include/configs/omapl138_lcdk.h | 1 -
include/configs/pcm052.h | 6 ---
include/configs/pic32mzdask.h | 1 -
include/configs/pico-imx6ul.h | 1 -
include/configs/s32v234evb.h | 6 ---
include/configs/siemens-am33x-common.h | 3 --
include/configs/stm32f429-discovery.h | 2 -
include/configs/stm32f746-disco.h | 1 -
include/configs/sunxi-common.h | 5 ---
include/configs/tao3530.h | 7 ----
include/configs/ti814x_evm.h | 3 --
include/configs/ti816x_evm.h | 3 --
include/configs/ti_armv7_keystone2.h | 1 -
include/configs/tqma6.h | 2 -
include/configs/udoo_neo.h | 1 -
include/configs/vf610twr.h | 6 ---
include/configs/vining_2000.h | 2 -
include/configs/warp.h | 2 -
include/configs/warp7.h | 2 -
include/configs/woodburn_common.h | 7 ----
include/configs/xtfpga.h | 2 -
scripts/config_whitelist.txt | 5 ---
74 files changed, 5 insertions(+), 345 deletions(-)
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c
index e8ba1ae09ef6..1edb1a439a1d 100644
--- a/arch/arm/cpu/arm720t/interrupts.c
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -12,12 +12,6 @@
#include <common.h>
-#ifdef CONFIG_USE_IRQ
-void do_irq (struct pt_regs *pt_regs)
-{
-}
-#endif
-
#if defined(CONFIG_TEGRA)
static ulong timestamp;
static ulong lastdec;
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index 7aa432a6fc33..8faf34b87ec5 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -8,7 +8,6 @@
extra-y = start.o
obj-y += cpu.o
-obj-$(CONFIG_USE_IRQ) += interrupts.o
obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/
diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile
index e44c549ba034..e78f8a017c5d 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/Makefile
+++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile
@@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_USE_IRQ) += interrupts.o
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
obj-y += speed.o
obj-y += timer.o
diff --git a/arch/arm/cpu/sa1100/cpu.c b/arch/arm/cpu/sa1100/cpu.c
index 4c9752a1c82b..59585af83a69 100644
--- a/arch/arm/cpu/sa1100/cpu.c
+++ b/arch/arm/cpu/sa1100/cpu.c
@@ -19,10 +19,6 @@
#include <asm/system.h>
#include <asm/io.h>
-#ifdef CONFIG_USE_IRQ
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
static void cache_flush(void);
int cleanup_before_linux (void)
diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c
index ed83043abb4d..066c172bb324 100644
--- a/arch/arm/lib/interrupts.c
+++ b/arch/arm/lib/interrupts.c
@@ -26,75 +26,6 @@
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_USE_IRQ
-int interrupt_init (void)
-{
- unsigned long cpsr;
-
- /*
- * setup up stacks if necessary
- */
- IRQ_STACK_START = gd->irq_sp - 4;
- IRQ_STACK_START_IN = gd->irq_sp + 8;
- FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
-
-
- __asm__ __volatile__("mrs %0, cpsr\n"
- : "=r" (cpsr)
- :
- : "memory");
-
- __asm__ __volatile__("msr cpsr_c, %0\n"
- "mov sp, %1\n"
- :
- : "r" (IRQ_MODE | I_BIT | F_BIT | (cpsr & ~FIQ_MODE)),
- "r" (IRQ_STACK_START)
- : "memory");
-
- __asm__ __volatile__("msr cpsr_c, %0\n"
- "mov sp, %1\n"
- :
- : "r" (FIQ_MODE | I_BIT | F_BIT | (cpsr & ~IRQ_MODE)),
- "r" (FIQ_STACK_START)
- : "memory");
-
- __asm__ __volatile__("msr cpsr_c, %0"
- :
- : "r" (cpsr)
- : "memory");
-
- return arch_interrupt_init();
-}
-
-/* enable IRQ interrupts */
-void enable_interrupts (void)
-{
- unsigned long temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "bic %0, %0, #0x80\n"
- "msr cpsr_c, %0"
- : "=r" (temp)
- :
- : "memory");
-}
-
-
-/*
- * disable IRQ/FIQ interrupts
- * returns true if interrupts had been enabled before we disabled them
- */
-int disable_interrupts (void)
-{
- unsigned long old,temp;
- __asm__ __volatile__("mrs %0, cpsr\n"
- "orr %1, %0, #0xc0\n"
- "msr cpsr_c, %1"
- : "=r" (old), "=r" (temp)
- :
- : "memory");
- return (old & 0x80) == 0;
-}
-#else
int interrupt_init (void)
{
/*
@@ -113,8 +44,6 @@ int disable_interrupts (void)
{
return 0;
}
-#endif
-
void bad_mode (void)
{
@@ -212,7 +141,6 @@ void do_fiq (struct pt_regs *pt_regs)
bad_mode ();
}
-#ifndef CONFIG_USE_IRQ
void do_irq (struct pt_regs *pt_regs)
{
efi_restore_gd();
@@ -220,4 +148,3 @@ void do_irq (struct pt_regs *pt_regs)
show_regs (pt_regs);
bad_mode ();
}
-#endif
diff --git a/arch/arm/lib/stack.c b/arch/arm/lib/stack.c
index 4614d2657cdd..737622d26f06 100644
--- a/arch/arm/lib/stack.c
+++ b/arch/arm/lib/stack.c
@@ -25,14 +25,6 @@ int arch_reserve_stacks(void)
gd->irq_sp = gd->start_addr_sp;
# if !defined(CONFIG_ARM64)
-# ifdef CONFIG_USE_IRQ
- gd->start_addr_sp -= (CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ);
- debug("Reserving %zu Bytes for IRQ stack at: %08lx\n",
- CONFIG_STACKSIZE_IRQ + CONFIG_STACKSIZE_FIQ, gd->start_addr_sp);
-
- /* 8-byte alignment for ARM ABI compliance */
- gd->start_addr_sp &= ~0x07;
-# endif
/* leave 3 words for abort-stack, plus 1 for alignment */
gd->start_addr_sp -= 16;
# endif
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S
index 9fe7415b66c7..f53b1e9a2bc1 100644
--- a/arch/arm/lib/vectors.S
+++ b/arch/arm/lib/vectors.S
@@ -128,19 +128,6 @@ fiq:
IRQ_STACK_START_IN:
.word 0x0badc0de
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-
-#endif /* CONFIG_USE_IRQ */
-
@
@ IRQ stack frame.
@
@@ -264,24 +251,6 @@ not_used:
bad_save_user_regs
bl do_not_used
-#ifdef CONFIG_USE_IRQ
-
- .align 5
-irq:
- get_irq_stack
- irq_save_user_regs
- bl do_irq
- irq_restore_user_regs
-
- .align 5
-fiq:
- get_fiq_stack
- /* someone ought to write a more effiction fiq_save_user_regs */
- irq_save_user_regs
- bl do_fiq
- irq_restore_user_regs
-
-#else
.align 5
irq:
@@ -295,6 +264,4 @@ fiq:
bad_save_user_regs
bl do_fiq
-#endif /* CONFIG_USE_IRQ */
-
#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/mach-davinci/misc.c b/arch/arm/mach-davinci/misc.c
index e1064e0a2f4d..ec331ba6bb89 100644
--- a/arch/arm/mach-davinci/misc.c
+++ b/arch/arm/mach-davinci/misc.c
@@ -107,7 +107,6 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
#endif /* CONFIG_DRIVER_TI_EMAC */
#if defined(CONFIG_SOC_DA8XX)
-#ifndef CONFIG_USE_IRQ
void irq_init(void)
{
/*
@@ -122,7 +121,6 @@ void irq_init(void)
writel(0xffffffff, &davinci_aintc_regs->ecr2);
writel(0xffffffff, &davinci_aintc_regs->ecr3);
}
-#endif
/*
* Enable PSC for various peripherals.
diff --git a/arch/arm/mach-keystone/cmd_ddr3.c b/arch/arm/mach-keystone/cmd_ddr3.c
index ea78ad8fd53b..d3eab0711c3d 100644
--- a/arch/arm/mach-keystone/cmd_ddr3.c
+++ b/arch/arm/mach-keystone/cmd_ddr3.c
@@ -15,12 +15,13 @@
DECLARE_GLOBAL_DATA_PTR;
#define DDR_MIN_ADDR CONFIG_SYS_SDRAM_BASE
+#define STACKSIZE (512 << 10) /* 512 KiB */
#define DDR_REMAP_ADDR 0x80000000
#define ECC_START_ADDR1 ((DDR_MIN_ADDR - DDR_REMAP_ADDR) >> 17)
#define ECC_END_ADDR1 (((gd->start_addr_sp - DDR_REMAP_ADDR - \
- CONFIG_STACKSIZE) >> 17) - 2)
+ STACKSIZE) >> 17) - 2)
#define DDR_TEST_BURST_SIZE 1024
diff --git a/arch/avr32/cpu/exception.c b/arch/avr32/cpu/exception.c
index d6991f6668d3..22eab03b12ca 100644
--- a/arch/avr32/cpu/exception.c
+++ b/arch/avr32/cpu/exception.c
@@ -10,6 +10,8 @@
DECLARE_GLOBAL_DATA_PTR;
+#define STACKSIZE 2048
+
static const char * const cpu_modes[8] = {
"Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
"Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
@@ -96,7 +98,7 @@ void do_unknown_exception(unsigned int ecr, struct pt_regs *regs)
printf("CPU Mode: %s\n", cpu_modes[mode]);
/* Avoid exception loops */
- if (regs->sp < (gd->start_addr_sp - CONFIG_STACKSIZE) ||
+ if (regs->sp < (gd->start_addr_sp - STACKSIZE) ||
regs->sp >= gd->start_addr_sp)
printf("\nStack pointer seems bogus, won't do stack dump\n");
else
diff --git a/arch/nds32/cpu/n1213/start.S b/arch/nds32/cpu/n1213/start.S
index 7b2b637af33b..99971fdbdba4 100644
--- a/arch/nds32/cpu/n1213/start.S
+++ b/arch/nds32/cpu/n1213/start.S
@@ -90,24 +90,6 @@ _start: j reset
_TEXT_BASE:
.word CONFIG_SYS_TEXT_BASE
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
- .word 0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
- .word 0x0badc0de
-#endif
-
/* IRQ stack memory (calculated at run-time) + 8 bytes */
.globl IRQ_STACK_START_IN
IRQ_STACK_START_IN:
diff --git a/board/Barix/ipam390/ipam390.c b/board/Barix/ipam390/ipam390.c
index 9747f329041a..fd1965d9f50b 100644
--- a/board/Barix/ipam390/ipam390.c
+++ b/board/Barix/ipam390/ipam390.c
@@ -188,9 +188,7 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA850_EVM;
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 37d2f54d3bdd..9e17eb865d0a 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -323,9 +323,7 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
#ifdef CONFIG_NAND_DAVINCI
/*
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 3ce1992c1dc2..d94128597760 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -171,9 +171,7 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
/* arch number of the board */
gd->bd->bi_arch_number = MACH_TYPE_OMAPL138_LCDK;
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 66804d75bd04..6edfa17a9119 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -203,9 +203,7 @@ int board_early_init_f(void)
/* Set LCD_B_PWR low to power down LCD Backlight*/
gpio_direction_output(102, 0);
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
/*
* NAND CS setup - cycle counts based on da850evm NAND timings in the
diff --git a/board/lego/ev3/legoev3.c b/board/lego/ev3/legoev3.c
index 7e1766c87173..0ad33eaeae05 100644
--- a/board/lego/ev3/legoev3.c
+++ b/board/lego/ev3/legoev3.c
@@ -145,9 +145,7 @@ int board_early_init_f(void)
int board_init(void)
{
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
/* arch number of the board */
/* LEGO didn't register for a unique number and uses da850evm */
diff --git a/board/omicron/calimain/calimain.c b/board/omicron/calimain/calimain.c
index 32f2b2018383..80a142eaf899 100644
--- a/board/omicron/calimain/calimain.c
+++ b/board/omicron/calimain/calimain.c
@@ -100,9 +100,7 @@ int board_init(void)
{
int val;
-#ifndef CONFIG_USE_IRQ
irq_init();
-#endif
/* address of boot parameters */
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
diff --git a/common/board_f.c b/common/board_f.c
index 224fbed92f19..ff078866655a 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -137,11 +137,6 @@ static int display_text_info(void)
text_base, bss_start, bss_end);
#endif
-#ifdef CONFIG_USE_IRQ
- debug("IRQ Stack: %08lx\n", IRQ_STACK_START);
- debug("FIQ Stack: %08lx\n", FIQ_STACK_START);
-#endif
-
return 0;
}
diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c
index 2fe323a85a52..588a84d7a919 100644
--- a/drivers/net/enc28j60.c
+++ b/drivers/net/enc28j60.c
@@ -489,10 +489,6 @@ static void enc_poll(enc_dev_t *enc)
u8 eir_reg;
u8 pkt_cnt;
-#ifdef CONFIG_USE_IRQ
- /* clear global interrupt enable bit in enc28j60 */
- enc_bclr(enc, CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
(void)enc_r8(enc, CTL_REG_ESTAT);
eir_reg = enc_r8(enc, CTL_REG_EIR);
if (eir_reg & ENC_EIR_TXIF) {
@@ -520,10 +516,6 @@ static void enc_poll(enc_dev_t *enc)
printf("%s: tx error\n", enc->dev->name);
enc_bclr(enc, CTL_REG_EIR, ENC_EIR_TXERIF);
}
-#ifdef CONFIG_USE_IRQ
- /* set global interrupt enable bit in enc28j60 */
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
}
/*
@@ -693,15 +685,6 @@ static int enc_setup(enc_dev_t *enc)
/* Reset PDPXMD-bit => half duplex */
enc_phy_write(enc, PHY_REG_PHCON1, 0);
-#ifdef CONFIG_USE_IRQ
- /* enable interrupts */
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_PKTIE);
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXIE);
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_RXERIE);
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_TXERIE);
- enc_bset(enc, CTL_REG_EIE, ENC_EIE_INTIE);
-#endif
-
return 0;
}
diff --git a/include/configs/advantech_dms-ba16.h b/include/configs/advantech_dms-ba16.h
index 14e9c06fac63..4886500d6a89 100644
--- a/include/configs/advantech_dms-ba16.h
+++ b/include/configs/advantech_dms-ba16.h
@@ -230,7 +230,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/am335x_igep0033.h b/include/configs/am335x_igep0033.h
index 2b61405345bf..7ee8ea797520 100644
--- a/include/configs/am335x_igep0033.h
+++ b/include/configs/am335x_igep0033.h
@@ -117,9 +117,6 @@
"1m(uboot),256k(environment),"\
"-(filesystem)"
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
/* SPL */
#define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
diff --git a/include/configs/aristainetos-common.h b/include/configs/aristainetos-common.h
index 030f01c36dc4..5c27055e457c 100644
--- a/include/configs/aristainetos-common.h
+++ b/include/configs/aristainetos-common.h
@@ -148,8 +148,6 @@
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#define CONFIG_STACKSIZE (128 * 1024)
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 708f0320cf2d..4c27225d8448 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -52,8 +52,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_STACKSIZE (2048)
-
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index aa308483a2bc..64d7c45aad68 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -71,8 +71,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_STACKSIZE (2048)
-
#define CONFIG_BOOTARGS \
"root=mtd:main rootfstype=jffs2"
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 771a35ab2bd6..3c03ed3eb1f2 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -69,8 +69,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_STACKSIZE (2048)
-
#define CONFIG_BOOTARGS \
"console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
diff --git a/include/configs/bcm23550_w1d.h b/include/configs/bcm23550_w1d.h
index 65e9e32f3e85..77d6e6aa3906 100644
--- a/include/configs/bcm23550_w1d.h
+++ b/include/configs/bcm23550_w1d.h
@@ -25,7 +25,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
-#define CONFIG_STACKSIZE SZ_256K
/* GPIO Driver */
#define CONFIG_KONA_GPIO
diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h
index 2d9b0a878d18..03f4ca0338c9 100644
--- a/include/configs/bcm28155_ap.h
+++ b/include/configs/bcm28155_ap.h
@@ -24,7 +24,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN SZ_4M /* see armv7/start.S. */
-#define CONFIG_STACKSIZE SZ_256K
/* GPIO Driver */
#define CONFIG_KONA_GPIO
diff --git a/include/configs/bcm_ep_board.h b/include/configs/bcm_ep_board.h
index 868b0a85d443..c187df233c59 100644
--- a/include/configs/bcm_ep_board.h
+++ b/include/configs/bcm_ep_board.h
@@ -28,7 +28,6 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE (256 * 1024)
/* Some commands use this as the default load address */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 45511be282df..14b25d410b13 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -237,7 +237,6 @@
#define CONFIG_SERIAL_TAG
/* misc */
-#define CONFIG_STACKSIZE (128 * 1024)
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_MISC_INIT_R
diff --git a/include/configs/colibri_imx7.h b/include/configs/colibri_imx7.h
index 2c9c0142bb56..87d201298490 100644
--- a/include/configs/colibri_imx7.h
+++ b/include/configs/colibri_imx7.h
@@ -136,8 +136,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 888899eacb34..73b43bd7adff 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -150,12 +150,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
index 99f0daece30b..f012af547fc8 100644
--- a/include/configs/edb93xx.h
+++ b/include/configs/edb93xx.h
@@ -74,7 +74,6 @@
#define CONFIG_EP93XX 1 /* This is a Cirrus Logic 93xx SoC */
#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
-#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
/* Monitor configuration */
#undef CONFIG_CMD_DATE
@@ -161,12 +160,6 @@
/* Run-time memory allocatons */
#define CONFIG_SYS_GBL_DATA_SIZE 128
-#define CONFIG_STACKSIZE (128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ (4 * 1024)
-#define CONFIG_STACKSIZE_FIQ (4 * 1024)
-#endif
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h
index afb5b738991e..084839702b02 100644
--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@@ -99,8 +99,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10800000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#define CONFIG_STACKSIZE (128 * 1024)
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index 48c9e0b3e9b2..658f4d932da4 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -76,8 +76,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#define CONFIG_STACKSIZE (128 * 1024)
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index f86e20caa20b..43b1fb030c1a 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -260,7 +260,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE (128 * 1024)
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index d7b9c18c8925..abc4214bc0ee 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -69,9 +69,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-#define CONFIG_STACKSIZE (2048)
-
-
/*
* After booting the board for the first time, new ethernet addresses
* should be generated and assigned to the environment variables
diff --git a/include/configs/liteboard.h b/include/configs/liteboard.h
index 2ce39ffecf90..258fd3ac62b9 100644
--- a/include/configs/liteboard.h
+++ b/include/configs/liteboard.h
@@ -113,7 +113,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h
index dfb72384d39d..d8bbc802d2d9 100644
--- a/include/configs/ls1021aiot.h
+++ b/include/configs/ls1021aiot.h
@@ -269,12 +269,6 @@
#define CONFIG_LS102XA_STREAM_ID
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (30 * 1024)
-
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 15850f2b5280..b349b367eb7c 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -537,12 +537,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_LS102XA_STREAM_ID
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (30 * 1024)
-
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 5d6a64acbd27..fcf035b86a39 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -403,12 +403,6 @@
#define CONFIG_LS102XA_STREAM_ID
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (30 * 1024)
-
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 6a345c04006e..b14e944897bd 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -396,12 +396,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_HZ 1000
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (30 * 1024)
-
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index 476387d5ad4a..0cf6010a6cd6 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -434,12 +434,6 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_HZ 1000
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (30 * 1024)
-
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index a2ab77a727c1..c04ae96f9da1 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -180,8 +180,6 @@
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#define CONFIG_STACKSIZE (128 * 1024)
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 3e7e5a39970d..f35d1265b0ee 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -127,8 +127,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_512M)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6sllevk.h b/include/configs/mx6sllevk.h
index 8215e63baacc..62159a16b72f 100644
--- a/include/configs/mx6sllevk.h
+++ b/include/configs/mx6sllevk.h
@@ -113,8 +113,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_128M)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6sxsabreauto.h b/include/configs/mx6sxsabreauto.h
index 448b575c2897..971f6c2f3175 100644
--- a/include/configs/mx6sxsabreauto.h
+++ b/include/configs/mx6sxsabreauto.h
@@ -95,8 +95,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index aff7a2458731..e63da4369215 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -123,8 +123,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index 71c22fffa8f2..f466c626a2cf 100644
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -150,7 +150,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/mx6ullevk.h b/include/configs/mx6ullevk.h
index c65a9e54745e..5bc26aac7e27 100644
--- a/include/configs/mx6ullevk.h
+++ b/include/configs/mx6ullevk.h
@@ -137,8 +137,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h
index 81d769f21ff8..9807ace1d90e 100644
--- a/include/configs/mx7dsabresd.h
+++ b/include/configs/mx7dsabresd.h
@@ -178,8 +178,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h
index f6e4b3bc7890..37f365dc55ba 100644
--- a/include/configs/mx7ulp_evk.h
+++ b/include/configs/mx7ulp_evk.h
@@ -88,7 +88,6 @@
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE SZ_8K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
index 6b128df4643b..e99968c805ed 100644
--- a/include/configs/nokia_rx51.h
+++ b/include/configs/nokia_rx51.h
@@ -48,7 +48,6 @@
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
-#undef CONFIG_USE_IRQ /* no support for IRQs */
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
@@ -381,13 +380,6 @@ int rx51_kp_getc(struct stdio_dev *sdev);
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-
-/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2
diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h
index 6700073aa203..85e95b31779c 100644
--- a/include/configs/omapl138_lcdk.h
+++ b/include/configs/omapl138_lcdk.h
@@ -48,7 +48,6 @@
#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE (256*1024) /* regular stack */
#define CONFIG_SYS_DA850_SYSCFG_SUSPSRC ( \
DAVINCI_SYSCFG_SUSPSRC_TIMER0 | \
diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h
index 286598d2def8..f506c9c8df99 100644
--- a/include/configs/pcm052.h
+++ b/include/configs/pcm052.h
@@ -226,12 +226,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h
index dacb78ab697c..9042dc269e0e 100644
--- a/include/configs/pic32mzdask.h
+++ b/include/configs/pic32mzdask.h
@@ -37,7 +37,6 @@
#define CONFIG_SYS_SDRAM_BASE 0x88000000
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
#define CONFIG_SYS_BOOTPARAMS_LEN (4 << 10)
-#define CONFIG_STACKSIZE (4 << 10) /* regular stack */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 8ad7fa620ddb..26b1b1147cb2 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -117,7 +117,6 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_CMDLINE_EDITING
-#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
index 0b12bf3d5596..398b3aa34393 100644
--- a/include/configs/s32v234evb.h
+++ b/include/configs/s32v234evb.h
@@ -199,12 +199,6 @@
#define CONFIG_SYS_MALLOC_BASE (DDR_BASE_ADDR)
#endif
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
#if 0
/* Configure PXE */
#define CONFIG_BOOTP_PXE
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h
index 5a9ec023683f..d69f513c65e6 100644
--- a/include/configs/siemens-am33x-common.h
+++ b/include/configs/siemens-am33x-common.h
@@ -228,9 +228,6 @@
# define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
#endif /* SPI support */
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
#define CONFIG_PHY_GIGE
diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h
index a456e458aaca..8609f2a0a986 100644
--- a/include/configs/stm32f429-discovery.h
+++ b/include/configs/stm32f429-discovery.h
@@ -66,8 +66,6 @@
#define CONFIG_SYS_MALLOC_LEN (2 << 20)
-#define CONFIG_STACKSIZE (64 << 10)
-
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
#define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
index 55280f203f8d..5776d89c97bb 100644
--- a/include/configs/stm32f746-disco.h
+++ b/include/configs/stm32f746-disco.h
@@ -58,7 +58,6 @@
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
-#define CONFIG_STACKSIZE (256 * 1024)
#define CONFIG_BOOTARGS \
"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 377ae00a7baa..cda2fec51953 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -155,11 +155,6 @@
/* standalone support */
#define CONFIG_STANDALONE_LOAD_ADDR CONFIG_SYS_LOAD_ADDR
-/* baudrate */
-
-/* The stack sizes are set up in start.S using the settings below */
-#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
-
/* FLASH and environment organization */
#define CONFIG_SYS_MONITOR_LEN (768 << 10) /* 768 KiB */
diff --git a/include/configs/tao3530.h b/include/configs/tao3530.h
index 035a9325b3c4..3f2da5795d21 100644
--- a/include/configs/tao3530.h
+++ b/include/configs/tao3530.h
@@ -196,13 +196,6 @@
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-
-/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h
index 319279e4fa17..baf818ba1a67 100644
--- a/include/configs/ti814x_evm.h
+++ b/include/configs/ti814x_evm.h
@@ -179,9 +179,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
/* Ethernet */
#define CONFIG_DRIVER_TI_CPSW
#define CONFIG_MII
diff --git a/include/configs/ti816x_evm.h b/include/configs/ti816x_evm.h
index 284046740ca8..b5af700e3816 100644
--- a/include/configs/ti816x_evm.h
+++ b/include/configs/ti816x_evm.h
@@ -137,7 +137,4 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif
-/* Unsupported features */
-#undef CONFIG_USE_IRQ
-
#endif
diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index f76e0a5c1fb9..c83cd76b8675 100644
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -28,7 +28,6 @@
#define CONFIG_NR_DRAM_BANKS 2
#define CONFIG_SYS_LPAE_SDRAM_BASE 0x800000000
#define CONFIG_MAX_RAM_BANK_SIZE (2 << 30) /* 2GB */
-#define CONFIG_STACKSIZE (512 << 10) /* 512 KiB */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE - \
GENERATED_GBL_DATA_SIZE)
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index e72332cd1ba6..1bfc438b81d8 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -349,8 +349,6 @@
"panicboot=echo No boot device !!! reset\0" \
TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
-#define CONFIG_STACKSIZE (128u * SZ_1K)
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/udoo_neo.h b/include/configs/udoo_neo.h
index 1d737ccd3e59..c6f39c38b332 100644
--- a/include/configs/udoo_neo.h
+++ b/include/configs/udoo_neo.h
@@ -69,7 +69,6 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h
index ee90045cadc7..3e7dc9b685fb 100644
--- a/include/configs/vf610twr.h
+++ b/include/configs/vf610twr.h
@@ -209,12 +209,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80010000
#define CONFIG_SYS_MEMTEST_END 0x87C00000
-/*
- * Stack sizes
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
/* Physical memory map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM (0x80000000)
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index ade5c2736fff..9a517a973893 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -33,8 +33,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/warp.h b/include/configs/warp.h
index 865f2ac81c72..5274b274a418 100644
--- a/include/configs/warp.h
+++ b/include/configs/warp.h
@@ -35,8 +35,6 @@
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M)
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index b3e1f2e59799..23b6eae5330a 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -85,8 +85,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
-#define CONFIG_STACKSIZE SZ_128K
-
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h
index 3f837e86fba4..f546c385e9fd 100644
--- a/include/configs/woodburn_common.h
+++ b/include/configs/woodburn_common.h
@@ -119,13 +119,6 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
-
-/*
* Physical Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 1
diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h
index 5169504dc76d..b1aa57935dd4 100644
--- a/include/configs/xtfpga.h
+++ b/include/configs/xtfpga.h
@@ -66,7 +66,6 @@
# define CONFIG_SYS_MONITOR_LEN 0x00040000 /* 256KB */
#endif
-#define CONFIG_SYS_STACKSIZE (512 << 10) /* stack 512KB */
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* heap 256KB */
/* Linux boot param area in RAM (used only when booting linux) */
@@ -110,7 +109,6 @@
/* U-Boot general configuration */
/*==============================*/
-#undef CONFIG_USE_IRQ /* Keep it simple, poll only */
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_MISC_INIT_R
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 811ba91d9558..04b6a9505209 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -2859,9 +2859,6 @@ CONFIG_SSP1_BASE
CONFIG_SSP2_BASE
CONFIG_SSP3_BASE
CONFIG_STACKBASE
-CONFIG_STACKSIZE
-CONFIG_STACKSIZE_FIQ
-CONFIG_STACKSIZE_IRQ
CONFIG_STANDALONE_LOAD_ADDR
CONFIG_STATIC_BOARD_REV
CONFIG_STATIC_RELA
@@ -6052,7 +6049,6 @@ CONFIG_SYS_SSD_BASE
CONFIG_SYS_SSD_BASE_PHYS
CONFIG_SYS_SST_SECT
CONFIG_SYS_SST_SECTSZ
-CONFIG_SYS_STACKSIZE
CONFIG_SYS_STACK_LENGTH
CONFIG_SYS_STACK_SIZE
CONFIG_SYS_STATUS_C
@@ -6562,7 +6558,6 @@ CONFIG_USB_XHCI_PCI
CONFIG_USER_LOWLEVEL_INIT
CONFIG_USE_FDT
CONFIG_USE_INTERRUPT
-CONFIG_USE_IRQ
CONFIG_USE_NAND
CONFIG_USE_NETDEV
CONFIG_USE_NOR
--
1.9.1
More information about the U-Boot
mailing list