[U-Boot] [PATCH v4 06/19] arm: socfpga: Add reset driver support for Arria 10
Ley Foon Tan
lftan.linux at gmail.com
Fri Apr 7 07:43:32 UTC 2017
On Fri, Apr 7, 2017 at 3:37 AM, Dinh Nguyen <dinh.linux at gmail.com> wrote:
> On Wed, Apr 5, 2017 at 4:32 AM, Ley Foon Tan <ley.foon.tan at intel.com> wrote:
>> Add reset driver support for Arria 10.
>>
>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
>> ---
>> arch/arm/mach-socfpga/Makefile | 2 +
>> arch/arm/mach-socfpga/include/mach/reset_manager.h | 2 +
>> .../include/mach/reset_manager_arria10.h | 144 ++++++++
>> arch/arm/mach-socfpga/reset_manager_arria10.c | 389 +++++++++++++++++++++
>> include/dt-bindings/reset/altr,rst-mgr-a10.h | 103 ++++++
>> 5 files changed, 640 insertions(+)
>> create mode 100644 arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
>> create mode 100644 arch/arm/mach-socfpga/reset_manager_arria10.c
>> create mode 100644 include/dt-bindings/reset/altr,rst-mgr-a10.h
>>
>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
>> index e83da2e..d81f003 100644
>> --- a/arch/arm/mach-socfpga/Makefile
>> +++ b/arch/arm/mach-socfpga/Makefile
>> @@ -10,6 +10,8 @@
>> obj-y += misc.o timer.o reset_manager.o clock_manager.o \
>> fpga_manager.o board.o
>>
>> +obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += reset_manager_arria10.o
>> +
>> obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
>>
>> # QTS-generated config file wrappers
>> diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager.h b/arch/arm/mach-socfpga/include/mach/reset_manager.h
>> index c99efa7..a0d611b 100644
>> --- a/arch/arm/mach-socfpga/include/mach/reset_manager.h
>> +++ b/arch/arm/mach-socfpga/include/mach/reset_manager.h
>> @@ -45,6 +45,8 @@ void socfpga_per_reset_all(void);
>>
>> #if defined(CONFIG_TARGET_SOCFPGA_GEN5)
>> #include <asm/arch/reset_manager_gen5.h>
>> +#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
>> +#include <asm/arch/reset_manager_arria10.h>
>> #endif
>>
>> #endif /* _RESET_MANAGER_H_ */
>> diff --git a/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
>> new file mode 100644
>> index 0000000..878c1b6
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/include/mach/reset_manager_arria10.h
>> @@ -0,0 +1,144 @@
>> +/*
>> + * Copyright (C) 2016-2017 Intel Corporation
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#ifndef _RESET_MANAGER_ARRIA10_H_
>> +#define _RESET_MANAGER_ARRIA10_H_
>> +
>> +void socfpga_watchdog_disable(void);
>> +void socfpga_reset_deassert_noc_ddr_scheduler(void);
>> +int socfpga_is_wdt_in_reset(void);
>> +void socfpga_emac_manage_reset(ulong emacbase, u32 state);
>> +int socfpga_reset_deassert_bridges_handoff(void);
>> +void socfpga_reset_assert_fpga_connected_peripherals(void);
>> +void socfpga_reset_deassert_osc1wd0(void);
>> +void socfpga_reset_uart(int assert);
>> +
>> +struct socfpga_reset_manager {
>> + u32 stat;
>> + u32 ramstat;
>> + u32 miscstat;
>> + u32 ctrl;
>> + u32 hdsken;
>> + u32 hdskreq;
>> + u32 hdskack;
>> + u32 counts;
>> + u32 mpumodrst;
>> + u32 per0modrst;
>> + u32 per1modrst;
>> + u32 brgmodrst;
>> + u32 sysmodrst;
>> + u32 coldmodrst;
>> + u32 nrstmodrst;
>> + u32 dbgmodrst;
>> + u32 mpuwarmmask;
>> + u32 per0warmmask;
>> + u32 per1warmmask;
>> + u32 brgwarmmask;
>> + u32 syswarmmask;
>> + u32 nrstwarmmask;
>> + u32 l3warmmask;
>> + u32 tststa;
>> + u32 tstscratch;
>> + u32 hdsktimeout;
>> + u32 hmcintr;
>> + u32 hmcintren;
>> + u32 hmcintrens;
>> + u32 hmcintrenr;
>> + u32 hmcgpout;
>> + u32 hmcgpin;
>> +};
>> +
>> +/*
>> + * SocFPGA Arria10 reset IDs, bank mapping is as follows:
>> + * 0 ... mpumodrst
>> + * 1 ... per0modrst
>> + * 2 ... per1modrst
>> + * 3 ... brgmodrst
>> + * 4 ... sysmodrst
>> + */
>> +#define RSTMGR_EMAC0 RSTMGR_DEFINE(1, 0)
>> +#define RSTMGR_EMAC1 RSTMGR_DEFINE(1, 1)
>> +#define RSTMGR_EMAC2 RSTMGR_DEFINE(1, 2)
>> +#define RSTMGR_NAND RSTMGR_DEFINE(1, 5)
>> +#define RSTMGR_QSPI RSTMGR_DEFINE(1, 6)
>> +#define RSTMGR_SDMMC RSTMGR_DEFINE(1, 7)
>> +#define RSTMGR_DMA RSTMGR_DEFINE(1, 16)
>> +#define RSTMGR_SPIM0 RSTMGR_DEFINE(1, 17)
>> +#define RSTMGR_SPIM1 RSTMGR_DEFINE(1, 18)
>> +#define RSTMGR_L4WD0 RSTMGR_DEFINE(2, 0)
>> +#define RSTMGR_L4WD1 RSTMGR_DEFINE(2, 1)
>> +#define RSTMGR_L4SYSTIMER0 RSTMGR_DEFINE(2, 2)
>> +#define RSTMGR_L4SYSTIMER1 RSTMGR_DEFINE(2, 3)
>> +#define RSTMGR_SPTIMER0 RSTMGR_DEFINE(2, 4)
>> +#define RSTMGR_SPTIMER1 RSTMGR_DEFINE(2, 5)
>> +#define RSTMGR_UART0 RSTMGR_DEFINE(2, 16)
>> +#define RSTMGR_UART1 RSTMGR_DEFINE(2, 17)
>> +#define RSTMGR_DDRSCH RSTMGR_DEFINE(3, 6)
>
> Are the above MACRO's still needed if we're using the dt-bindings?
We still need them now. The reset function framework also used for Gen5,
so it is massive change if we change it now. But, we can consider to
convert them later.
>
>> +
>> +#define ALT_RSTMGR_CTL_SWWARMRSTREQ_SET_MSK BIT(1)
>> +#define ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK BIT(0)
>> +#define ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK BIT(1)
>> +#define ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK BIT(2)
>> +#define ALT_RSTMGR_PER0MODRST_USB0_SET_MSK BIT(3)
>> +#define ALT_RSTMGR_PER0MODRST_USB1_SET_MSK BIT(4)
>> +#define ALT_RSTMGR_PER0MODRST_NAND_SET_MSK BIT(5)
>> +#define ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK BIT(6)
>> +#define ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK BIT(7)
>> +#define ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK BIT(8)
>> +#define ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK BIT(9)
>> +#define ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK BIT(10)
>> +#define ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK BIT(11)
>> +#define ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK BIT(12)
>> +#define ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK BIT(13)
>> +#define ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK BIT(14)
>> +#define ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK BIT(15)
>> +#define ALT_RSTMGR_PER0MODRST_DMA_SET_MSK BIT(16)
>> +#define ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK BIT(17)
>> +#define ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK BIT(18)
>> +#define ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK BIT(19)
>> +#define ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK BIT(20)
>> +#define ALT_RSTMGR_PER0MODRST_DMAECC_SET_MSK BIT(21)
>> +#define ALT_RSTMGR_PER0MODRST_EMACPTP_SET_MSK BIT(22)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF0_SET_MSK BIT(24)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF1_SET_MSK BIT(25)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF2_SET_MSK BIT(26)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF3_SET_MSK BIT(27)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF4_SET_MSK BIT(28)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF5_SET_MSK BIT(29)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF6_SET_MSK BIT(30)
>> +#define ALT_RSTMGR_PER0MODRST_DMAIF7_SET_MSK BIT(31)
>> +
>> +#define ALT_RSTMGR_PER1MODRST_WD0_SET_MSK BIT(0)
>> +#define ALT_RSTMGR_PER1MODRST_WD1_SET_MSK BIT(1)
>> +#define ALT_RSTMGR_PER1MODRST_L4SYSTMR0_SET_MSK BIT(2)
>> +#define ALT_RSTMGR_PER1MODRST_L4SYSTMR1_SET_MSK BIT(3)
>> +#define ALT_RSTMGR_PER1MODRST_SPTMR0_SET_MSK BIT(4)
>> +#define ALT_RSTMGR_PER1MODRST_SPTMR1_SET_MSK BIT(5)
>> +#define ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK BIT(8)
>> +#define ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK BIT(9)
>> +#define ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK BIT(10)
>> +#define ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK BIT(11)
>> +#define ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK BIT(12)
>> +#define ALT_RSTMGR_PER1MODRST_UART0_SET_MSK BIT(16)
>> +#define ALT_RSTMGR_PER1MODRST_UART1_SET_MSK BIT(17)
>> +#define ALT_RSTMGR_PER1MODRST_GPIO0_SET_MSK BIT(24)
>> +#define ALT_RSTMGR_PER1MODRST_GPIO1_SET_MSK BIT(25)
>> +#define ALT_RSTMGR_PER1MODRST_GPIO2_SET_MSK BIT(26)
>> +
>> +#define ALT_RSTMGR_BRGMODRST_H2F_SET_MSK BIT(0)
>> +#define ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK BIT(1)
>> +#define ALT_RSTMGR_BRGMODRST_F2H_SET_MSK BIT(2)
>> +#define ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK BIT(3)
>> +#define ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK BIT(4)
>> +#define ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK BIT(5)
>> +#define ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK BIT(6)
>> +
>> +#define ALT_RSTMGR_HDSKEN_SDRSELFREFEN_SET_MSK BIT(0)
>> +#define ALT_RSTMGR_HDSKEN_FPGAMGRHSEN_SET_MSK BIT(1)
>> +#define ALT_RSTMGR_HDSKEN_FPGAHSEN_SET_MSK BIT(2)
>> +#define ALT_RSTMGR_HDSKEN_ETRSTALLEN_SET_MSK BIT(3)
>> +
>> +#endif /* _RESET_MANAGER_ARRIA10_H_ */
>> diff --git a/arch/arm/mach-socfpga/reset_manager_arria10.c b/arch/arm/mach-socfpga/reset_manager_arria10.c
>> new file mode 100644
>> index 0000000..e24f2f2
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/reset_manager_arria10.c
>> @@ -0,0 +1,389 @@
>> +/*
>> + * Copyright (C) 2016-2017 Intel Corporation
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>> +
>> +#include <asm/io.h>
>> +#include <asm/arch/fpga_manager.h>
>> +#include <asm/arch/misc.h>
>> +#include <asm/arch/reset_manager.h>
>> +#include <asm/arch/system_manager.h>
>> +#include <common.h>
>> +#include <errno.h>
>> +#include <fdtdec.h>
>> +#include <wait_bit.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static const struct socfpga_reset_manager *reset_manager_base =
>> + (void *)SOCFPGA_RSTMGR_ADDRESS;
>> +static const struct socfpga_system_manager *sysmgr_regs =
>> + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>> +
>> +#define ECC_MASK (ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK | \
>> + ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK | \
>> + ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK | \
>> + ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK | \
>> + ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK | \
>> + ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK)
>> +
>> +void socfpga_reset_uart(int assert)
>> +{
>> + u32 mask = 0;
>> + unsigned int com_port;
>> +
>> + com_port = uart_com_port(gd->fdt_blob);
>> +
>> + if (com_port == SOCFPGA_UART1_ADDRESS)
>> + mask |= ALT_RSTMGR_PER1MODRST_UART1_SET_MSK;
>> + else if (com_port == SOCFPGA_UART0_ADDRESS)
>> + mask |= ALT_RSTMGR_PER1MODRST_UART0_SET_MSK;
>> +
>> + if (assert)
>> + setbits_le32(&reset_manager_base->per1modrst, mask);
>> + else
>> + clrbits_le32(&reset_manager_base->per1modrst, mask);
>> +}
>
> Why do you need the above function? Couldn't you just used:
>
> socfpga_per_reset(SOCFPGA_RESET(UART<#>));
Okay, will refactor this function to something like this:
void socfpga_reset_uart(int assert)
{
unsigned int com_port;
com_port = uart_com_port(gd->fdt_blob);
if (com_port == SOCFPGA_UART1_ADDRESS)
socfpga_per_reset(SOCFPGA_RESET(UART1), assert);
else if (com_port == SOCFPGA_UART0_ADDRESS)
socfpga_per_reset(SOCFPGA_RESET(UART0), assert);
}
>
>
>> +
>> +static const u32 per0fpgamasks[] = {
>> + ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK,
>> + 0, /* i2c0 per1mod */
>> + 0, /* i2c1 per1mod */
>> + 0, /* i2c0_emac */
>> + 0, /* i2c1_emac */
>> + 0, /* i2c2_emac */
>> + ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_NAND_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_QSPI_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_SDMMC_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_SPIM0_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_SPIM1_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_SPIS0_SET_MSK,
>> + ALT_RSTMGR_PER0MODRST_SPIS1_SET_MSK,
>> + 0, /* uart0 per1mod */
>> + 0, /* uart1 per1mod */
>> +};
>> +
>> +static const u32 per1fpgamasks[] = {
>> + 0, /* emac0 per0mod */
>> + 0, /* emac1 per0mod */
>> + 0, /* emac2 per0mod */
>> + ALT_RSTMGR_PER1MODRST_I2C0_SET_MSK,
>> + ALT_RSTMGR_PER1MODRST_I2C1_SET_MSK,
>> + ALT_RSTMGR_PER1MODRST_I2C2_SET_MSK, /* i2c0_emac */
>> + ALT_RSTMGR_PER1MODRST_I2C3_SET_MSK, /* i2c1_emac */
>> + ALT_RSTMGR_PER1MODRST_I2C4_SET_MSK, /* i2c2_emac */
>> + 0, /* nand per0mod */
>> + 0, /* qspi per0mod */
>> + 0, /* sdmmc per0mod */
>> + 0, /* spim0 per0mod */
>> + 0, /* spim1 per0mod */
>> + 0, /* spis0 per0mod */
>> + 0, /* spis1 per0mod */
>> + ALT_RSTMGR_PER1MODRST_UART0_SET_MSK,
>> + ALT_RSTMGR_PER1MODRST_UART1_SET_MSK,
>> +};
>> +
>> +struct bridge_cfg {
>> + int compat_id;
>> + u32 mask_noc;
>> + u32 mask_rstmgr;
>> +};
>> +
>> +static const struct bridge_cfg bridge_cfg_tbl[] = {
>> + {
>> + COMPAT_ALTERA_SOCFPGA_H2F_BRG,
>> + ALT_SYSMGR_NOC_H2F_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_H2F_SET_MSK,
>> + },
>> + {
>> + COMPAT_ALTERA_SOCFPGA_LWH2F_BRG,
>> + ALT_SYSMGR_NOC_LWH2F_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK,
>> + },
>> + {
>> + COMPAT_ALTERA_SOCFPGA_F2H_BRG,
>> + ALT_SYSMGR_NOC_F2H_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_F2H_SET_MSK,
>> + },
>> + {
>> + COMPAT_ALTERA_SOCFPGA_F2SDR0,
>> + ALT_SYSMGR_NOC_F2SDR0_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK,
>> + },
>> + {
>> + COMPAT_ALTERA_SOCFPGA_F2SDR1,
>> + ALT_SYSMGR_NOC_F2SDR1_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK,
>> + },
>> + {
>> + COMPAT_ALTERA_SOCFPGA_F2SDR2,
>> + ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK,
>> + },
>> +};
>> +
>> +/* Disable the watchdog (toggle reset to watchdog) */
>> +void socfpga_watchdog_disable(void)
>> +{
>> + /* assert reset for watchdog */
>> + setbits_le32(&reset_manager_base->per1modrst,
>> + ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
>> +}
>> +
>> +/* Release NOC ddr scheduler from reset */
>> +void socfpga_reset_deassert_noc_ddr_scheduler(void)
>> +{
>> + clrbits_le32(&reset_manager_base->brgmodrst,
>> + ALT_RSTMGR_BRGMODRST_DDRSCH_SET_MSK);
>> +}
>> +
>> +/* Check whether Watchdog in reset state? */
>> +int socfpga_is_wdt_in_reset(void)
>> +{
>> + u32 val;
>> +
>> + val = readl(&reset_manager_base->per1modrst);
>> + val &= ALT_RSTMGR_PER1MODRST_WD0_SET_MSK;
>> +
>> + /* return 0x1 if watchdog in reset */
>> + return val;
>> +}
>> +
>> +/* emacbase: base address of emac to enable/disable reset
>> + * state: 0 - disable reset, !0 - enable reset
>> + */
>> +void socfpga_emac_manage_reset(ulong emacbase, u32 state)
>> +{
>> + ulong eccmask;
>> + ulong emacmask;
>> +
>> + switch (emacbase) {
>> + case SOCFPGA_EMAC0_ADDRESS:
>> + eccmask = ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK;
>> + emacmask = ALT_RSTMGR_PER0MODRST_EMAC0_SET_MSK;
>> + break;
>> + case SOCFPGA_EMAC1_ADDRESS:
>> + eccmask = ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK;
>> + emacmask = ALT_RSTMGR_PER0MODRST_EMAC1_SET_MSK;
>> + break;
>> + case SOCFPGA_EMAC2_ADDRESS:
>> + eccmask = ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK;
>> + emacmask = ALT_RSTMGR_PER0MODRST_EMAC2_SET_MSK;
>> + break;
>> + default:
>> + error("emac base address unexpected! %lx", emacbase);
>> + hang();
>> + break;
>> + }
>> +
>> + if (state) {
>> + /* Enable ECC OCP first */
>> + setbits_le32(&reset_manager_base->per0modrst, eccmask);
>> + setbits_le32(&reset_manager_base->per0modrst, emacmask);
>> + } else {
>> + /* Disable ECC OCP first */
>> + clrbits_le32(&reset_manager_base->per0modrst, emacmask);
>> + clrbits_le32(&reset_manager_base->per0modrst, eccmask);
>> + }
>> +}
>> +
>> +static int get_bridge_init_val(const void *blob, int compat_id)
>> +{
>> + int node;
>> +
>> + node = fdtdec_next_compatible(blob, 0, compat_id);
>> + if (node < 0)
>> + return 0;
>> +
>> + return fdtdec_get_uint(blob, node, "init-val", 0);
>> +}
>> +
>> +/* Enable bridges (hps2fpga, lwhps2fpga, fpga2hps, fpga2sdram) per handoff */
>> +int socfpga_reset_deassert_bridges_handoff(void)
>> +{
>> + u32 mask_noc = 0, mask_rstmgr = 0;
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(bridge_cfg_tbl); i++) {
>> + if (get_bridge_init_val(gd->fdt_blob,
>> + bridge_cfg_tbl[i].compat_id)) {
>> + mask_noc |= bridge_cfg_tbl[i].mask_noc;
>> + mask_rstmgr |= bridge_cfg_tbl[i].mask_rstmgr;
>> + }
>> + }
>> +
>> + /* clear idle request to all bridges */
>> + setbits_le32(&sysmgr_regs->noc_idlereq_clr, mask_noc);
>> +
>> + /* Release bridges from reset state per handoff value */
>> + clrbits_le32(&reset_manager_base->brgmodrst, mask_rstmgr);
>> +
>> + /* Poll until all idleack to 0, timeout at 1000ms */
>> + return wait_for_bit(__func__, &sysmgr_regs->noc_idleack, mask_noc,
>> + false, 1000, false);
>> +}
>> +
>> +void socfpga_reset_assert_fpga_connected_peripherals(void)
>> +{
>> + u32 mask0 = 0;
>> + u32 mask1 = 0;
>> + u32 fpga_pinux_addr = SOCFPGA_PINMUX_FPGA_INTERFACE_ADDRESS;
>> + int i;
>> +
>> + for (i = 0; i < ARRAY_SIZE(per1fpgamasks); i++) {
>> + if (readl(fpga_pinux_addr)) {
>> + mask0 |= per0fpgamasks[i];
>> + mask1 |= per1fpgamasks[i];
>> + }
>> + fpga_pinux_addr += sizeof(u32);
>> + }
>> +
>> + setbits_le32(&reset_manager_base->per0modrst, mask0 & ECC_MASK);
>> + setbits_le32(&reset_manager_base->per1modrst, mask1);
>> + setbits_le32(&reset_manager_base->per0modrst, mask0);
>> +}
>> +
>> +/* Release L4 OSC1 Watchdog Timer 0 from reset through reset manager */
>> +void socfpga_reset_deassert_osc1wd0(void)
>> +{
>> + clrbits_le32(&reset_manager_base->per1modrst,
>> + ALT_RSTMGR_PER1MODRST_WD0_SET_MSK);
>> +}
>> +
>> +/*
>> + * Assert or de-assert SoCFPGA reset manager reset.
>> + */
>> +void socfpga_per_reset(u32 reset, int set)
>> +{
>> + const u32 *reg;
>> + u32 rstmgr_bank = RSTMGR_BANK(reset);
>> +
>> + switch (rstmgr_bank) {
>> + case 0:
>> + reg = &reset_manager_base->mpumodrst;
>> + break;
>> + case 1:
>> + reg = &reset_manager_base->per0modrst;
>> + break;
>> + case 2:
>> + reg = &reset_manager_base->per1modrst;
>> + break;
>> + case 3:
>> + reg = &reset_manager_base->brgmodrst;
>> + break;
>> + case 4:
>> + reg = &reset_manager_base->sysmodrst;
>> + break;
>> +
>> + default:
>> + return;
>> + }
>> +
>> + if (set)
>> + setbits_le32(reg, 1 << RSTMGR_RESET(reset));
>> + else
>> + clrbits_le32(reg, 1 << RSTMGR_RESET(reset));
>> +}
>> +
>> +/*
>> + * Assert reset on every peripheral but L4WD0.
>> + * Watchdog must be kept intact to prevent glitches
>> + * and/or hangs.
>> + * For the Arria10, we disable all the peripherals except L4 watchdog0,
>> + * L4 Timer 0, and ECC.
>> + */
>> +void socfpga_per_reset_all(void)
>> +{
>> + const u32 l4wd0 = (1 << RSTMGR_RESET(SOCFPGA_RESET(L4WD0)) |
>> + (1 << RSTMGR_RESET(SOCFPGA_RESET(L4SYSTIMER0))));
>> + unsigned mask_ecc_ocp =
>> + ALT_RSTMGR_PER0MODRST_EMACECC0_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_EMACECC1_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_EMACECC2_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_USBECC0_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_USBECC1_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_NANDECC_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_QSPIECC_SET_MSK |
>> + ALT_RSTMGR_PER0MODRST_SDMMCECC_SET_MSK;
>> +
>> + /* disable all components except ECC_OCP, L4 Timer0 and L4 WD0 */
>> + writel(~l4wd0, &reset_manager_base->per1modrst);
>> + setbits_le32(&reset_manager_base->per0modrst, ~mask_ecc_ocp);
>> +
>> + /* Finally disable the ECC_OCP */
>> + setbits_le32(&reset_manager_base->per0modrst, mask_ecc_ocp);
>> +}
>> +
>> +#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
>> +int socfpga_bridges_reset(int enable)
>> +{
>> + /* For SoCFPGA-VT, this is NOP. */
>> + return 0;
>> +}
>> +#else
>> +int socfpga_bridges_reset(int enable)
>> +{
>> + int ret;
>> +
>> + /* Disable all the bridges (hps2fpga, lwhps2fpga, fpga2hps,
>> + fpga2sdram) */
>> + /* set idle request to all bridges */
>> + writel(ALT_SYSMGR_NOC_H2F_SET_MSK |
>> + ALT_SYSMGR_NOC_LWH2F_SET_MSK |
>> + ALT_SYSMGR_NOC_F2H_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
>> + &sysmgr_regs->noc_idlereq_set);
>> +
>> + /* Enable the NOC timeout */
>> + writel(ALT_SYSMGR_NOC_TMO_EN_SET_MSK, &sysmgr_regs->noc_timeout);
>> +
>> + /* Poll until all idleack to 1 */
>> + ret = wait_for_bit(__func__, &sysmgr_regs->noc_idleack,
>> + ALT_SYSMGR_NOC_H2F_SET_MSK |
>> + ALT_SYSMGR_NOC_LWH2F_SET_MSK |
>> + ALT_SYSMGR_NOC_F2H_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
>> + true, 10000, false);
>> + if (ret)
>> + return ret;
>> +
>> + /* Poll until all idlestatus to 1 */
>> + ret = wait_for_bit(__func__, &sysmgr_regs->noc_idlestatus,
>> + ALT_SYSMGR_NOC_H2F_SET_MSK |
>> + ALT_SYSMGR_NOC_LWH2F_SET_MSK |
>> + ALT_SYSMGR_NOC_F2H_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR0_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR1_SET_MSK |
>> + ALT_SYSMGR_NOC_F2SDR2_SET_MSK,
>> + true, 10000, false);
>> + if (ret)
>> + return ret;
>> +
>> + /* Put all bridges (except NOR DDR scheduler) into reset state */
>> + setbits_le32(&reset_manager_base->brgmodrst,
>> + (ALT_RSTMGR_BRGMODRST_H2F_SET_MSK |
>> + ALT_RSTMGR_BRGMODRST_LWH2F_SET_MSK |
>> + ALT_RSTMGR_BRGMODRST_F2H_SET_MSK |
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM0_SET_MSK |
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM1_SET_MSK |
>> + ALT_RSTMGR_BRGMODRST_F2SSDRAM2_SET_MSK));
>> +
>> + /* Disable NOC timeout */
>> + writel(0, &sysmgr_regs->noc_timeout);
>> +
>> + return 0;
>> +}
>> +#endif
>> diff --git a/include/dt-bindings/reset/altr,rst-mgr-a10.h b/include/dt-bindings/reset/altr,rst-mgr-a10.h
>> new file mode 100644
>> index 0000000..99875de
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/altr,rst-mgr-a10.h
>> @@ -0,0 +1,103 @@
>> +/*
>> + * Copyright (C) 2016-2017 Intel Corporation
>> + *
>> + * SPDX-License-Identifier: GPL-2.0
>> + */
>
> Hmm...did you by chance copy this file from the Linux kernel? It looks awfully
> the same, and if so, please keep the Copyright from the original.
>
Okay, will copy its original copyright header.
Regards
Ley Foon
More information about the U-Boot
mailing list