[U-Boot] [PATCH] mx6sabresd: README: Add eMMC boot configuration

[Breno Lima]

Explain how to flash the eMMC and how to boot from it.

Signed-off-by: Breno Lima <breno.lima at nxp.com>
---
 board/freescale/mx6sabresd/README | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README
index 5814b9d..875d4b2 100644
--- a/board/freescale/mx6sabresd/README
+++ b/board/freescale/mx6sabresd/README
@@ -27,6 +27,28 @@ This will generate the image called u-boot.imx.
 
 $ sudo dd if=u-boot.imx of=/dev/sdb bs=1K seek=1 && sync
 
+- Flash the u-boot.imx binary into the eMMC:
+
+Set SW6 to download mode: 00001100
+
+Plug a usb cable to USB-OTG and load the u-boot image using the imx_usb_loader
+tool (https://github.com/boundarydevices/imx_usb_loader):
+
+$ sudo ./imx_usb u-boot.imx
+
+In U-boot change the eMMC partition config:
+
+=> mmc partconf 2 1 0 0
+
+Mount the eMMC in the host PC:
+
+=> ums 0 mmc 2
+
+Flash the u-boot.imx binary
+
+$ sudo dd if=u-boot.imx of=/dev/sdX bs=1K seek=1 && sync
+
+Set SW6 to eMMC 8-bit boot: 11010110
 
 2. Booting via SPL
 ------------------
-- 
2.7.4