[U-Boot] [PATCH v5 3/3] sunxi: add support for Lichee Pi Zero
Icenowy Zheng
icenowy at aosc.io
Sat Apr 8 07:30:14 UTC 2017
From: Icenowy Zheng <icenowy at aosc.xyz>
Lichee Pi Zero is a development board with a V3s SoC, which features
64MiB DRAM co-packaged within the SoC, a TF slot, a SPI NOR slot (not
soldered in production batch), a 40-pin RGB LCD connector and some extra
pins available as 2.54mm pins or stamp holes.
Add support for it.
Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
---
Changes in v4:
- Removed NONSEC disabling for Lichee Pi Zero board.
- Enriched commit message.
arch/arm/dts/Makefile | 5 +-
arch/arm/dts/sun8i-v3s-licheepi-zero.dts | 83 ++++++++++++++++++++++++++++++++
board/sunxi/MAINTAINERS | 5 ++
configs/LicheePi_Zero_defconfig | 12 +++++
4 files changed, 104 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/sun8i-v3s-licheepi-zero.dts
create mode 100644 configs/LicheePi_Zero_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index eafc661da1..6d918a6750 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -295,7 +295,10 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
sun8i-h3-nanopi-neo.dtb \
- sun8i-h3-nanopi-neo-air.dtb
+ sun8i-h3-nanopi-neo-air.dtb \
+ sun8i-h3-nanopi-neo.dtb
+dtb-$(CONFIG_MACH_SUN8I_V3S) += \
+ sun8i-v3s-licheepi-zero.dtb
dtb-$(CONFIG_MACH_SUN50I_H5) += \
sun50i-h5-orangepi-pc2.dtb
dtb-$(CONFIG_MACH_SUN50I) += \
diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
new file mode 100644
index 0000000000..3d9168cbae
--- /dev/null
+++ b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy at aosc.xyz>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-v3s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Lichee Pi Zero";
+ compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-0 = <&mmc0_pins_a>;
+ pinctrl-names = "default";
+ broken-cd;
+ bus-width = <4>;
+ vmmc-supply = <®_vcc3v3>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 91ca6eaf7a..04e19daee1 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -182,6 +182,11 @@ M: Jelle de Jong <jelledejong at powercraft.nl>
S: Maintained
F: configs/Lamobo_R1_defconfig
+LICHEEPI-ZERO BOARD
+M: Icenowy Zheng <icenowy at aosc.xyz>
+S: Maintained
+F: configs/LicheePi_Zero_defconfig
+
LINKSPRITE-PCDUINO BOARD
M: Zoltan Herpai <wigyori at uid0.hu>
S: Maintained
diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig
new file mode 100644
index 0000000000..c147084849
--- /dev/null
+++ b/configs/LicheePi_Zero_defconfig
@@ -0,0 +1,12 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_V3S=y
+CONFIG_DRAM_CLK=360
+CONFIG_DRAM_ZQ=14779
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+# CONFIG_NETDEVICES is not set
--
2.12.2
More information about the U-Boot
mailing list