[U-Boot] board: ti: am57xx: enable input on mmc clock

[Tom Rini]

On Wed, Feb 08, 2017 at 06:43:59PM +0530, Sekhar Nori wrote:

> As per the latest pinmux data available for AM572x EVM,
> rev A3, input should be enabled on MMC clock lines for
> MMC2/2/3 for stable operation.
> 
> Further, AM572x TRM, SPRUHZ6, Revised June 2016, in
> section 18.4.6.1.1 "Pad Configuration Registers" states
> that input should be enabled for MMC 2/3/4 clock lines.
> 
> Enable input on MMC1 and MMC3 clock to match the latest
> pinmux data. Input is already enabled on MMC2 clock for
> BeagleBoard x15. Further, input is already enabled on all
> MMCx clocks for other AM57xx boards (AM572x and AM571x
> IDK).
> 
> Tested with HS and UHS SD card on AM572x EVM Rev A3.
> 
> Signed-off-by: Sekhar Nori <nsekhar at ti.com>
> Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170408/443cd2f1/attachment.sig>