[U-Boot] [PATCH v4 14/35] ARM: dts: imx6qdl-sabresd: Add usb otg node

[Jagan Teki]

From: Jagan Teki <jagan at amarulasolutions.com>

Add usb otg node for i.MX6QDL sabresd boards.

Cc: Stefano Babic <sbabic at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v4, v3, v2:
- none

 arch/arm/dts/imx6qdl-sabresd.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/dts/imx6qdl-sabresd.dtsi b/arch/arm/dts/imx6qdl-sabresd.dtsi
index e38e370..0e104c1 100644
--- a/arch/arm/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd.dtsi
@@ -21,6 +21,17 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
+	reg_usb_otg_vbus: regulator at 0 {
+		compatible = "regulator-fixed";
+		reg = <0>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
 	reg_usb_h1_vbus: regulator at 1 {
 		compatible = "regulator-fixed";
 		reg = <1>;
@@ -77,6 +88,13 @@
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
@@ -134,6 +152,11 @@
 			>;
 		};
 
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			>;
+		};
 
 		pinctrl_usdhc2: usdhc2grp {
 			fsl,pins = <
-- 
1.9.1