[U-Boot] [PATCH v2] ARM64: rockchip: split RK3399-Q7 board off the RK3399-EVB board

[Simon Glass]

On 7 April 2017 at 11:13, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> From: Klaus Goger <klaus.goger at theobroma-systems.com>
>
> The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
> connector) system-on-module from Theobroma Systems, featuring the
> Rockchip RK3399.
>
> It provides the following feature set:
>  * up to 4GB DDR3
>  * on-module SPI-NOR flash
>  * on-module eMMC (with 8-bit interace)
>  * SD card (on a baseboad) via edge connector
>  * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY
>  * HDMI/eDP/MIPI displays
>  * 2x MIPI-CSI
>  * USB
>    - 1x USB 3.0 dual-role (direct connection)
>    - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
>  * on-module STM32 Cortex-M0 companion controller, implementing:
>    - low-power RTC functionality (ISL1208 emulation)
>    - fan controller (AMC6821 emulation)
>    - USB<->CAN bridge controller
>
> Note that we use a multi-payload FIT image for booting and have
> Cortex-M0 payload in a separate subimage: we thus rely on the FIT
> image loader to put it into the SRAM region that ATF expects it in.
>
> Signed-off-by: Klaus Goger <klaus.goger at theobroma-systems.com>
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> ---
>
> Changes in v2:
> - fixes dram_init_banksize() to have the correct return type and to
>   return 0 (success) unconditionally
>
>  arch/arm/mach-rockchip/rk3399/Kconfig              | 19 ++++++
>  board/theobroma-systems/puma_rk3399/Kconfig        | 15 +++++
>  board/theobroma-systems/puma_rk3399/MAINTAINERS    | 10 +++
>  board/theobroma-systems/puma_rk3399/Makefile       |  7 +++
>  board/theobroma-systems/puma_rk3399/README         | 73 ++++++++++++++++++++++
>  .../theobroma-systems/puma_rk3399/fit_spl_atf.its  | 57 +++++++++++++++++
>  board/theobroma-systems/puma_rk3399/puma-rk3399.c  | 71 +++++++++++++++++++++
>  configs/puma-rk3399_defconfig                      |  3 +-
>  include/configs/puma_rk3399.h                      | 26 ++++++++
>  9 files changed, 280 insertions(+), 1 deletion(-)
>  create mode 100644 board/theobroma-systems/puma_rk3399/Kconfig
>  create mode 100644 board/theobroma-systems/puma_rk3399/MAINTAINERS
>  create mode 100644 board/theobroma-systems/puma_rk3399/Makefile
>  create mode 100644 board/theobroma-systems/puma_rk3399/README
>  create mode 100644 board/theobroma-systems/puma_rk3399/fit_spl_atf.its
>  create mode 100644 board/theobroma-systems/puma_rk3399/puma-rk3399.c
>  create mode 100644 include/configs/puma_rk3399.h

Reviewed-by: Simon Glass <sjg at chromium.org>