[U-Boot] [PATCH v3 09/18] ARM: DT: stm32f7: add gpio device tree nodes

[Vikas Manocha]

Also created alias for gpios for stm32f7 discovery board. Based on these
aliases, it would be possible to get gpio devices by sequence.

Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v3: None
Changed in v2: None

 arch/arm/dts/stm32f746-disco.dts |  12 +++++
 arch/arm/dts/stm32f746.dtsi      | 111 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 123 insertions(+)

diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts
index f098d2e..f830aa9 100644
--- a/arch/arm/dts/stm32f746-disco.dts
+++ b/arch/arm/dts/stm32f746-disco.dts
@@ -65,6 +65,18 @@
 	aliases {
 		serial0 = &usart1;
 		spi0 = &qspi;
+		/* Aliases for gpios so as to use sequence */
+		gpio0 = &gpioa;
+		gpio1 = &gpiob;
+		gpio2 = &gpioc;
+		gpio3 = &gpiod;
+		gpio4 = &gpioe;
+		gpio5 = &gpiof;
+		gpio6 = &gpiog;
+		gpio7 = &gpioh;
+		gpio8 = &gpioi;
+		gpio9 = &gpioj;
+		gpio10 = &gpiok;
 	};
 };
 
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index e9fd6f4..865d5cf 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -114,6 +114,117 @@
 			u-boot,dm-pre-reloc;
 			pins-are-numbered;
 
+			gpioa: gpio at 40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 0>;
+				st,bank-name = "GPIOA";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpiob: gpio at 40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 1>;
+				st,bank-name = "GPIOB";
+				u-boot,dm-pre-reloc;
+			};
+
+
+			gpioc: gpio at 40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 2>;
+				st,bank-name = "GPIOC";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpiod: gpio at 40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 3>;
+				st,bank-name = "GPIOD";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpioe: gpio at 40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 4>;
+				st,bank-name = "GPIOE";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpiof: gpio at 40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 5>;
+				st,bank-name = "GPIOF";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpiog: gpio at 40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 6>;
+				st,bank-name = "GPIOG";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpioh: gpio at 40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 7>;
+				st,bank-name = "GPIOH";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpioi: gpio at 40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 8>;
+				st,bank-name = "GPIOI";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpioj: gpio at 40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 9>;
+				st,bank-name = "GPIOJ";
+				u-boot,dm-pre-reloc;
+			};
+
+			gpiok: gpio at 40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				compatible = "st,stm32-gpio";
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 10>;
+				st,bank-name = "GPIOK";
+				u-boot,dm-pre-reloc;
+			};
+
 			usart1_pins_a: usart1 at 0 {
 				pins1 {
 					pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
-- 
1.9.1