[U-Boot] [PATCH v4 01/18] stm32f7: use clock driver to enable qspi controller clock

Vikas Manocha vikas.manocha at st.com
Mon Apr 10 22:02:50 UTC 2017


Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v4: None
Changed in v3: None
Changed in v2: None

 arch/arm/dts/stm32f746.dtsi |  1 +
 drivers/spi/stm32_qspi.c    | 16 +++++++++++++++-
 2 files changed, 16 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index b2b0b5f..883f818 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -78,6 +78,7 @@
 			reg-names = "QuadSPI", "QuadSPI-memory";
 			interrupts = <92>;
 			spi-max-frequency = <108000000>;
+			clocks = <&rcc 0 65>;
 			status = "disabled";
 		};
 		usart1: serial at 40011000 {
diff --git a/drivers/spi/stm32_qspi.c b/drivers/spi/stm32_qspi.c
index 05358eb..f0434a4 100644
--- a/drivers/spi/stm32_qspi.c
+++ b/drivers/spi/stm32_qspi.c
@@ -17,6 +17,7 @@
 #include <errno.h>
 #include <asm/arch/stm32.h>
 #include <asm/arch/stm32_defs.h>
+#include <clk.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -457,7 +458,20 @@ static int stm32_qspi_probe(struct udevice *bus)
 
 	priv->max_hz = plat->max_hz;
 
-	clock_setup(QSPI_CLOCK_CFG);
+#ifdef CONFIG_CLK
+	int ret;
+	struct clk clk;
+	ret = clk_get_by_index(bus, 0, &clk);
+	if (ret < 0)
+		return ret;
+
+	ret = clk_enable(&clk);
+
+	if (ret) {
+		dev_err(bus, "failed to enable clock\n");
+		return ret;
+	}
+#endif
 
 	setbits_le32(&priv->regs->cr, STM32_QSPI_CR_SSHIFT);
 
-- 
1.9.1



More information about the U-Boot mailing list