[U-Boot] [PATCH v4 06/18] stm32f7: use clock driver to enable sdram controller clock
Vikas Manocha
vikas.manocha at st.com
Mon Apr 10 22:02:55 UTC 2017
This patch also removes the sdram/fmc clock enable from board specific
code.
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
Changed in v4: None
Changed in v3: None
Changed in v2: None
arch/arm/dts/stm32f746.dtsi | 1 +
board/st/stm32f746-disco/stm32f746-disco.c | 2 --
drivers/ram/stm32_sdram.c | 15 +++++++++++++++
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/stm32f746.dtsi b/arch/arm/dts/stm32f746.dtsi
index 3707550..e9fd6f4 100644
--- a/arch/arm/dts/stm32f746.dtsi
+++ b/arch/arm/dts/stm32f746.dtsi
@@ -74,6 +74,7 @@
fmc: fmc at A0000000 {
compatible = "st,stm32-fmc";
reg = <0xA0000000 0x1000>;
+ clocks = <&rcc 0 64>;
u-boot,dm-pre-reloc;
};
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
index e1113a6..370db15 100644
--- a/board/st/stm32f746-disco/stm32f746-disco.c
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -51,8 +51,6 @@ int dram_init(void)
if (rv)
return rv;
- clock_setup(FMC_CLOCK_CFG);
-
rv = uclass_get_device(UCLASS_RAM, 0, &dev);
if (rv) {
debug("DRAM init failed: %d\n", rv);
diff --git a/drivers/ram/stm32_sdram.c b/drivers/ram/stm32_sdram.c
index 67be61f..67d8855 100644
--- a/drivers/ram/stm32_sdram.c
+++ b/drivers/ram/stm32_sdram.c
@@ -6,6 +6,7 @@
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <ram.h>
#include <asm/io.h>
@@ -122,6 +123,20 @@ int stm32_sdram_init(void)
static int stm32_fmc_probe(struct udevice *dev)
{
+#ifdef CONFIG_CLK
+ int ret;
+ struct clk clk;
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret < 0)
+ return ret;
+
+ ret = clk_enable(&clk);
+
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+#endif
stm32_sdram_init();
return 0;
}
--
1.9.1
More information about the U-Boot
mailing list