[U-Boot] [PATCH v3 6/6] board: toradex: colibri_vf: Add DCU support for Colibri Vybrid

Sanchayan Maity maitysanchayan at gmail.com
Tue Apr 11 05:42:14 UTC 2017


From: Stefan Agner <stefan.agner at toradex.com>

The Vybrid SoC family has the same display controller unit (DCU)
like the LS1021A SoC. This patch adds platform data, pinmux defines
and clock control to enable the driver for Toradex Colibri Vybrid
module.

Signed-off-by: Stefan Agner <stefan.agner at toradex.com>
Signed-off-by: Sanchayan Maity <maitysanchayan at gmail.com>
---
 arch/arm/include/asm/arch-vf610/crm_regs.h    | 14 +++++
 arch/arm/include/asm/arch-vf610/imx-regs.h    |  2 +
 arch/arm/include/asm/arch-vf610/iomux-vf610.h | 31 +++++++++++
 arch/arm/include/asm/imx-common/iomux-v3.h    |  3 ++
 board/toradex/colibri_vf/Makefile             |  1 +
 board/toradex/colibri_vf/colibri_vf.c         | 76 +++++++++++++++++++++------
 board/toradex/colibri_vf/dcu.c                | 38 ++++++++++++++
 configs/colibri_vf_defconfig                  |  4 ++
 include/configs/colibri_vf.h                  | 13 +++++
 9 files changed, 166 insertions(+), 16 deletions(-)
 create mode 100644 board/toradex/colibri_vf/dcu.c

diff --git a/arch/arm/include/asm/arch-vf610/crm_regs.h b/arch/arm/include/asm/arch-vf610/crm_regs.h
index a46e396f1d..73b1dd2f14 100644
--- a/arch/arm/include/asm/arch-vf610/crm_regs.h
+++ b/arch/arm/include/asm/arch-vf610/crm_regs.h
@@ -9,6 +9,8 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/types.h>
+
 /* Clock Controller Module (CCM) */
 struct ccm_reg {
 	u32 ccr;
@@ -150,6 +152,9 @@ struct anadig_reg {
 #define CCM_CACRR_ARM_CLK_DIV_MASK		0x7
 #define CCM_CACRR_ARM_CLK_DIV(v)		((v) & 0x7)
 
+#define CCM_CSCMR1_DCU1_CLK_SEL			(1 << 29)
+#define CCM_CSCMR1_DCU0_CLK_SEL			(1 << 28)
+
 #define CCM_CSCMR1_QSPI0_CLK_SEL_OFFSET		22
 #define CCM_CSCMR1_QSPI0_CLK_SEL_MASK		(0x3 << 22)
 #define CCM_CSCMR1_QSPI0_CLK_SEL(v)		(((v) & 0x3) << 22)
@@ -174,6 +179,13 @@ struct anadig_reg {
 #define CCM_CSCDR2_ESDHC1_CLK_DIV_MASK		(0xf << 20)
 #define CCM_CSCDR2_ESDHC1_CLK_DIV(v)		(((v) & 0xf) << 20)
 
+#define CCM_CSCDR3_DCU1_EN			(1 << 23)
+#define CCM_CSCDR3_DCU1_DIV_MASK		(0x7 << 20)
+#define CCM_CSCDR3_DCU1_DIV(v)			(((v) & 0x7) << 20)
+#define CCM_CSCDR3_DCU0_EN			(1 << 19)
+#define CCM_CSCDR3_DCU0_DIV_MASK		(0x7 << 16)
+#define CCM_CSCDR3_DCU0_DIV(v)			(((v) & 0x7) << 16)
+
 #define CCM_CSCDR3_NFC_PRE_DIV_OFFSET		13
 #define CCM_CSCDR3_NFC_PRE_DIV_MASK		(0x7 << 13)
 #define CCM_CSCDR3_NFC_PRE_DIV(v)		(((v) & 0x7) << 13)
@@ -193,6 +205,7 @@ struct anadig_reg {
 #define CCM_CCGR0_DSPI1_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR1_USBC0_CTRL_MASK       (0x3 << 8)
 #define CCM_CCGR1_PIT_CTRL_MASK			(0x3 << 14)
+#define CCM_CCGR1_TCON0_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR1_WDOGA5_CTRL_MASK		(0x3 << 28)
 #define CCM_CCGR2_QSPI0_CTRL_MASK		(0x3 << 8)
 #define CCM_CCGR2_IOMUXC_CTRL_MASK		(0x3 << 16)
@@ -203,6 +216,7 @@ struct anadig_reg {
 #define CCM_CCGR2_PORTE_CTRL_MASK		(0x3 << 26)
 #define CCM_CCGR3_ANADIG_CTRL_MASK		0x3
 #define CCM_CCGR3_SCSC_CTRL_MASK        (0x3 << 4)
+#define CCM_CCGR3_DCU0_CTRL_MASK		(0x3 << 16)
 #define CCM_CCGR4_WKUP_CTRL_MASK		(0x3 << 20)
 #define CCM_CCGR4_CCM_CTRL_MASK			(0x3 << 22)
 #define CCM_CCGR4_GPC_CTRL_MASK			(0x3 << 24)
diff --git a/arch/arm/include/asm/arch-vf610/imx-regs.h b/arch/arm/include/asm/arch-vf610/imx-regs.h
index cac68efde2..ca97462c35 100644
--- a/arch/arm/include/asm/arch-vf610/imx-regs.h
+++ b/arch/arm/include/asm/arch-vf610/imx-regs.h
@@ -69,6 +69,7 @@
 #define USB_PHY0_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050800)
 #define USB_PHY1_BASE_ADDR  (AIPS0_BASE_ADDR + 0x00050C00)
 #define SCSC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00052000)
+#define DCU0_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00058000)
 #define ASRC_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00060000)
 #define SPDIF_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00061000)
 #define ESAI_BASE_ADDR		(AIPS0_BASE_ADDR + 0x00062000)
@@ -98,6 +99,7 @@
 #define USBC1_BASE_ADDR     (AIPS1_BASE_ADDR + 0x00034000)
 #define ENET_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00050000)
 #define ENET1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00051000)
+#define DCU1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00058000)
 #define NFC_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00060000)
 
 #define QSPI0_AMBA_BASE		0x20000000
diff --git a/arch/arm/include/asm/arch-vf610/iomux-vf610.h b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
index a140be05f1..5af071a4db 100644
--- a/arch/arm/include/asm/arch-vf610/iomux-vf610.h
+++ b/arch/arm/include/asm/arch-vf610/iomux-vf610.h
@@ -40,6 +40,8 @@
 				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
 #define VF610_DSPI_SIN_PAD_CTRL	(PAD_CTL_IBE_ENABLE | PAD_CTL_DSE_20ohm | \
 				PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH)
+#define VF610_DCU_PAD_CTRL     (PAD_CTL_SPEED_MED | PAD_CTL_SRE | \
+				PAD_CTL_DSE_37ohm | PAD_CTL_OBE_ENABLE)
 
 enum {
 	VF610_PAD_PTA6__RMII0_CLKIN		= IOMUX_PAD(0x0000, 0x0000, 2, __NA_, 0, VF610_ENET_PAD_CTRL),
@@ -166,6 +168,35 @@ enum {
 
 	VF610_PAD_PTC28__NF_CLE  		= IOMUX_PAD(0x0194, 0x0194, 6, __NA_, 0, VF610_NFC_CN_PAD_CTRL),
 
+	VF610_PAD_PTE0__DCU0_HSYNC		= IOMUX_PAD(0x01a4, 0x01a4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE1__DCU0_VSYNC		= IOMUX_PAD(0x01a8, 0x01a8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE2__DCU0_PCLK		= IOMUX_PAD(0x01ac, 0x01ac, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE4__DCU0_DE			= IOMUX_PAD(0x01b4, 0x01b4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE5__DCU0_R0			= IOMUX_PAD(0x01b8, 0x01b8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE6__DCU0_R1			= IOMUX_PAD(0x01bc, 0x01bc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE7__DCU0_R2			= IOMUX_PAD(0x01c0, 0x01c0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE8__DCU0_R3			= IOMUX_PAD(0x01c4, 0x01c4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE9__DCU0_R4			= IOMUX_PAD(0x01c8, 0x01c8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE10__DCU0_R5		= IOMUX_PAD(0x01cc, 0x01cc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE11__DCU0_R6		= IOMUX_PAD(0x01d0, 0x01d0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE12__DCU0_R7		= IOMUX_PAD(0x01d4, 0x01d4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE13__DCU0_G0		= IOMUX_PAD(0x01d8, 0x01d8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE14__DCU0_G1		= IOMUX_PAD(0x01dc, 0x01dc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE15__DCU0_G2		= IOMUX_PAD(0x01e0, 0x01e0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE16__DCU0_G3		= IOMUX_PAD(0x01e4, 0x01e4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE17__DCU0_G4		= IOMUX_PAD(0x01e8, 0x01e8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE18__DCU0_G5		= IOMUX_PAD(0x01ec, 0x01ec, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE19__DCU0_G6		= IOMUX_PAD(0x01f0, 0x01f0, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE20__DCU0_G7		= IOMUX_PAD(0x01f4, 0x01f4, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE21__DCU0_B0		= IOMUX_PAD(0x01f8, 0x01f8, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE22__DCU0_B1		= IOMUX_PAD(0x01fc, 0x01fc, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE23__DCU0_B2		= IOMUX_PAD(0x0200, 0x0200, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE24__DCU0_B3		= IOMUX_PAD(0x0204, 0x0204, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE25__DCU0_B4		= IOMUX_PAD(0x0208, 0x0208, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE26__DCU0_B5		= IOMUX_PAD(0x020c, 0x020c, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE27__DCU0_B6		= IOMUX_PAD(0x0210, 0x0210, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+	VF610_PAD_PTE28__DCU0_B7		= IOMUX_PAD(0x0214, 0x0214, 1, __NA_, 0, VF610_DCU_PAD_CTRL),
+
 	VF610_PAD_DDR_RESETB			= IOMUX_PAD(0x021c, 0x021c, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A15__DDR_A_15		= IOMUX_PAD(0x0220, 0x0220, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
 	VF610_PAD_DDR_A14__DDR_A_14		= IOMUX_PAD(0x0224, 0x0224, 0, __NA_, 0, VF610_DDR_PAD_CTRL),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 7587cbbf95..ba0ed43811 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -165,7 +165,10 @@ typedef u64 iomux_v3_cfg_t;
 #define PAD_CTL_ODE		(1 << 10)
 
 #define PAD_CTL_DSE_150ohm	(1 << 6)
+#define PAD_CTL_DSE_75ohm	(2 << 6)
 #define PAD_CTL_DSE_50ohm	(3 << 6)
+#define PAD_CTL_DSE_37ohm	(4 << 6)
+#define PAD_CTL_DSE_30ohm	(5 << 6)
 #define PAD_CTL_DSE_25ohm	(6 << 6)
 #define PAD_CTL_DSE_20ohm	(7 << 6)
 
diff --git a/board/toradex/colibri_vf/Makefile b/board/toradex/colibri_vf/Makefile
index c7e5134ba1..4d6287f14a 100644
--- a/board/toradex/colibri_vf/Makefile
+++ b/board/toradex/colibri_vf/Makefile
@@ -5,3 +5,4 @@
 #
 
 obj-y	:= colibri_vf.o
+obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 7b74eb7e9d..46dd15bac8 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -17,6 +17,7 @@
 #include <mmc.h>
 #include <fdt_support.h>
 #include <fsl_esdhc.h>
+#include <fsl_dcu_fb.h>
 #include <jffs2/load_kernel.h>
 #include <miiphy.h>
 #include <mtd_node.h>
@@ -295,6 +296,49 @@ static void setup_iomux_gpio(void)
 }
 #endif
 
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+static void setup_iomux_fsl_dcu(void)
+{
+	static const iomux_v3_cfg_t dcu0_pads[] = {
+		VF610_PAD_PTE0__DCU0_HSYNC,
+		VF610_PAD_PTE1__DCU0_VSYNC,
+		VF610_PAD_PTE2__DCU0_PCLK,
+		VF610_PAD_PTE4__DCU0_DE,
+		VF610_PAD_PTE5__DCU0_R0,
+		VF610_PAD_PTE6__DCU0_R1,
+		VF610_PAD_PTE7__DCU0_R2,
+		VF610_PAD_PTE8__DCU0_R3,
+		VF610_PAD_PTE9__DCU0_R4,
+		VF610_PAD_PTE10__DCU0_R5,
+		VF610_PAD_PTE11__DCU0_R6,
+		VF610_PAD_PTE12__DCU0_R7,
+		VF610_PAD_PTE13__DCU0_G0,
+		VF610_PAD_PTE14__DCU0_G1,
+		VF610_PAD_PTE15__DCU0_G2,
+		VF610_PAD_PTE16__DCU0_G3,
+		VF610_PAD_PTE17__DCU0_G4,
+		VF610_PAD_PTE18__DCU0_G5,
+		VF610_PAD_PTE19__DCU0_G6,
+		VF610_PAD_PTE20__DCU0_G7,
+		VF610_PAD_PTE21__DCU0_B0,
+		VF610_PAD_PTE22__DCU0_B1,
+		VF610_PAD_PTE23__DCU0_B2,
+		VF610_PAD_PTE24__DCU0_B3,
+		VF610_PAD_PTE25__DCU0_B4,
+		VF610_PAD_PTE26__DCU0_B5,
+		VF610_PAD_PTE27__DCU0_B6,
+		VF610_PAD_PTE28__DCU0_B7,
+	};
+
+	imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads));
+}
+
+static void setup_tcon(void)
+{
+	setbits_le32(TCON0_BASE_ADDR, (1 << 29));
+}
+#endif
+
 #ifdef CONFIG_FSL_ESDHC
 struct fsl_esdhc_cfg esdhc_cfg[1] = {
 	{ESDHC1_BASE_ADDR},
@@ -431,6 +475,11 @@ static void clock_init(void)
 			CCM_CSCDR3_NFC_PRE_DIV(3));
 	clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
 			CCM_CSCMR2_RMII_CLK_SEL(2));
+
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+		setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK);
+		setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK);
+#endif
 }
 
 static void mscm_init(void)
@@ -470,6 +519,11 @@ int board_early_init_f(void)
 	setup_iomux_dspi();
 #endif
 
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+	setup_tcon();
+	setup_iomux_fsl_dcu();
+#endif
+
 	return 0;
 }
 
@@ -478,22 +532,6 @@ int board_late_init(void)
 {
 	struct src *src = (struct src *)SRC_BASE_ADDR;
 
-	/* Default memory arguments */
-	if (!getenv("memargs")) {
-		switch (gd->ram_size) {
-		case 0x08000000:
-			/* 128 MB */
-			setenv("memargs", "mem=128M");
-			break;
-		case 0x10000000:
-			/* 256 MB */
-			setenv("memargs", "mem=256M");
-			break;
-		default:
-			printf("Failed detecting RAM size.\n");
-		}
-	}
-
 	if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT)
 			== SRC_SBMR2_BMOD_SERIAL) {
 		printf("Serial Downloader recovery mode, disable autoboot\n");
@@ -541,6 +579,7 @@ int checkboard(void)
 #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
 int ft_board_setup(void *blob, bd_t *bd)
 {
+	int ret = 0;
 #ifdef CONFIG_FDT_FIXUP_PARTITIONS
 	static struct node_info nodes[] = {
 		{ "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
@@ -550,6 +589,11 @@ int ft_board_setup(void *blob, bd_t *bd)
 	puts("   Updating MTD partitions...\n");
 	fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
 #endif
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+	ret = fsl_dcu_fixedfb_setup(blob);
+	if (ret)
+		return ret;
+#endif
 
 	return ft_common_board_setup(blob, bd);
 }
diff --git a/board/toradex/colibri_vf/dcu.c b/board/toradex/colibri_vf/dcu.c
new file mode 100644
index 0000000000..3fa6a763d8
--- /dev/null
+++ b/board/toradex/colibri_vf/dcu.c
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2017 Toradex AG
+ *
+ * FSL DCU platform driver
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/crm_regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <fsl_dcu_fb.h>
+#include "div64.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+unsigned int dcu_set_pixel_clock(unsigned int pixclock)
+{
+	struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
+	unsigned long long div;
+
+	clrbits_le32(&ccm->cscmr1, CCM_CSCMR1_DCU0_CLK_SEL);
+	clrsetbits_le32(&ccm->cscdr3,
+			CCM_CSCDR3_DCU0_DIV_MASK | CCM_CSCDR3_DCU0_EN,
+			CCM_CSCDR3_DCU0_DIV(0) | CCM_CSCDR3_DCU0_EN);
+	div = (unsigned long long)(PLL1_PFD2_FREQ / 1000);
+	do_div(div, pixclock);
+
+	return div;
+}
+
+int platform_dcu_init(unsigned int xres, unsigned int yres,
+		      const char *port,
+		      struct fb_videomode *dcu_fb_videomode)
+{
+	fsl_dcu_init(xres, yres, 32);
+
+	return 0;
+}
diff --git a/configs/colibri_vf_defconfig b/configs/colibri_vf_defconfig
index 0474abc3c5..1f0f929ce5 100644
--- a/configs/colibri_vf_defconfig
+++ b/configs/colibri_vf_defconfig
@@ -52,3 +52,7 @@ CONFIG_G_DNL_MANUFACTURER="Toradex"
 CONFIG_G_DNL_VENDOR_NUM=0x1b67
 CONFIG_G_DNL_PRODUCT_NUM=0x4000
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_VIDEO=y
+CONFIG_VIDEO_FSL_DCU_FB=y
+CONFIG_SYS_CONSOLE_FG_COL=0x00
+CONFIG_SYS_CONSOLE_BG_COL=0x00
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h
index 73b43bd7ad..5dc5ed0b71 100644
--- a/include/configs/colibri_vf.h
+++ b/include/configs/colibri_vf.h
@@ -25,6 +25,17 @@
 #define CONFIG_MXC_OCOTP
 #endif
 
+#ifdef CONFIG_VIDEO_FSL_DCU_FB
+#define CONFIG_CMD_BMP
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SYS_FSL_DCU_LE
+
+#define CONFIG_SYS_DCU_ADDR		DCU0_BASE_ADDR
+#define DCU_LAYER_MAX_NUM		64
+#endif
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
@@ -130,6 +141,8 @@
 	"setupdate=run setsdupdate || run setusbupdate\0" \
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	"video-mode=dcufb:640x480-16 at 60,monitor=lcd\0" \
+	"splashpos=m,m\0" \
 	SD_BOOTCMD \
 	NFS_BOOTCMD \
 	UBI_BOOTCMD
-- 
2.12.2



More information about the U-Boot mailing list