[U-Boot] [PATCH] board/t1024rdb: enable board-level reset when issuing reset command

[Shengzhou Liu]

> -----Original Message-----
> From: York Sun [mailto:york.sun at nxp.com]
> Sent: Tuesday, April 11, 2017 1:14 AM
> To: Shengzhou Liu <shengzhou.liu at nxp.com>; u-boot at lists.denx.de
> Subject: Re: [PATCH] board/t1024rdb: enable board-level reset when issuing
> reset command
> 
> On 04/10/2017 01:14 AM, Shengzhou Liu wrote:
> > As board-specific reset logic, it needs to issue reset signal via CPLD
> > when issuing 'reset' command in u-boot, this patch solves the issue of
> > reset command not working on T1024RDB.
> 
> Shengzhou,
> 
> Doesn't the RST_REQ signal work for this board?
> 
> York

York,  

Yes, RST_REQ can't reliably work without CPLD reset on T1024RDB, it needs a board-level reset via CPLD reset logic. 

Shengzhou