[U-Boot] [PATCH v6 1/3] arm: dts: update Meson GXBB / Odroid-C2 DT with latest Linux version

felix zihlmann felix.zihlmann at gmail.com
Tue Apr 11 18:09:32 UTC 2017


Am Montag, den 10.04.2017, 21:07 +0200 schrieb Heiner Kallweit:
> Am 10.04.2017 um 21:03 schrieb felix zihlmann:
> > Hi,
> > 
> > I have tried this patch-set (applied to u-boot-2017.03) on a Odroid-C2.
> > Booting from SD card works fine. However booting form eMMC card (128GB
> > from Hardkernel) produces the following error:
> > 
> > => fatload mmc 0:1 ${initrd_loadaddr} ${initrdfile}
> > Card did not respond to voltage select!
> > mmc_init: -95, time 9
> > ** Bad device mmc 0 **
> 
> mmc 0 is the SD slot. When doing "mmc list" you should see:
> 
> => mmc list
> mmc at 72000: 0
> mmc at 74000: 1 (eMMC)
> 
> So you have to do "fatload mmc 1:1 ......."
> 
> Heiner

That was it! Thanks very much. You can add me as tested-by if you like.

Felix
> 
> > Setting max-frequency to 60MHz does not help.
> > 
> > Booting from the eMMC card using the Hardkernel u-boot and the
> > Hardkernel kernel works fine.
> > 
> > Thanks!
> > 
> > Felix
> > 
> > 
> 




More information about the U-Boot mailing list