[U-Boot] [PATCH v4] imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOM

[Stefano Babic]

On 12/04/2017 18:01, Adam Ford wrote:
> On Fri, Apr 7, 2017 at 10:25 AM, Adam Ford <aford173 at gmail.com> wrote:
>> Logic PD has an i.MX6Q system on module (SOM) with a development kit. The
>> SOM has a built-in microSD socket, DDR and NAND flash.  The development kit
>> has an SMSC Ethernet PHY, serial debug port and a variety of peripherals.
>> This have been verified to boot the i.MX6Q version over either SD
>> on the development kit or NAND built into the SOM.  Items in the dtsi file
>> are specific to the SOM itself.  Items in the dts file are in the baseboard.
>> Future versions of the SOM will come out supporting the same basebord and
>> potentially future base boards will come out supporting the same SOM.
>>
>> Signed-off-by: Adam Ford <aford173 at gmail.com>
>> ---
>> Changes in V4:
>>   - Eliminate DM_THERMAL
>>   - Fix typo README
>>   - Elminate more dead/unnecessary code
>>   - Re-order device tree file contents
>>   - Add I2C_EEPROM
>>   - Remove device tree items U-Boot cannot support
>>   - Fix 80 character warning
>>
> 
> Any chance this can get reviewed and/or applied before the next RC candidate?
> 

Yes - Applied to u-boot-imx, thanks!

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================