[U-Boot] [PATCH-v2 1/2] mips: qemu-mips/64: Remove obsolete CONFIG_SYS_MONITOR_LEN from config

[Kyle Edwards]

This fixes an issue with the saveenv command causing U-Boot to no
longer work on the QEMU Mips pseudoboard. Because the offset of the
environment was being determined by CONFIG_SYS_MONITOR_LEN, and this
value was less than the actual size of U-Boot, saveenv was overwriting
parts of the U-Boot code. Because CONFIG_SYS_MONITOR_LEN is no longer
used on MIPS, this patch removes it and places the environment at the
end of the pseudoboard's 4MB flash.

Signed-off-by: Kyle Edwards <kyleedwardsny at gmail.com>
Cc: Daniel Schwierzeck <daniel.schwierzeck at gmail.com>
---
 include/configs/qemu-mips.h   | 3 +--
 include/configs/qemu-mips64.h | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index be7f4f2..b67d413 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -102,7 +102,6 @@
  */
 /* The following #defines are needed to get flash environment right */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
@@ -115,10 +114,10 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /* Address and size of Primary Environment Sector */
 #define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 
 #define CONFIG_ENV_OVERWRITE	1
 
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
index 39afbff..4856087 100644
--- a/include/configs/qemu-mips64.h
+++ b/include/configs/qemu-mips64.h
@@ -102,7 +102,6 @@
  */
 /* The following #defines are needed to get flash environment right */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
 #define CONFIG_SYS_INIT_SP_OFFSET	0x400000
 
@@ -115,10 +114,10 @@
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /* Address and size of Primary Environment Sector */
 #define CONFIG_ENV_SIZE		0x8000
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 
 #define CONFIG_ENV_OVERWRITE	1
 
-- 
2.7.4