[U-Boot] [PATCH 2/2][v4] armv8: ls2080aqds: Add support for SD boot

[Santan Kumar]

> -----Original Message-----
> From: York Sun [mailto:york.sun at nxp.com]
> Sent: Wednesday, April 12, 2017 9:13 PM
> To: Santan Kumar <santan.kumar at nxp.com>; u-boot at lists.denx.de
> Cc: Priyanka Jain <priyanka.jain at nxp.com>; Abhimanyu Saini
> <abhimanyu.saini at nxp.com>
> Subject: Re: [PATCH 2/2][v4] armv8: ls2080aqds: Add support for SD boot
> 
> On 04/03/2017 03:58 AM, Santan Kumar wrote:
> > Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
> > Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
> > Signed-off-by: Abhimanyu Saini <abhimanyu.saini at nxp.com>
> > ---
> > Changes for v4:
> >  Rebased to latest codebase
> >  Incorporated York's comments to move CONFIG_SPL_MMC_SUPPORT  to
> > kconfig
> >
> > Depends on
> >  York MMU patches:
> >
> >
> https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fbundle%2Fyorksun%2FRewrite_MMU%2F&data=01%7
> C01%7Cyo
> >
> rk.sun%40nxp.com%7Cb6b2df7806744cde8d4508d47a8065e0%7C686ea1d3bc
> 2b4c6f
> >
> a92cd99c5c301635%7C0&sdata=AvZVek9YBqogA8SDUuILS1EFkubGSxa7Uqh
> QY9cYi7s
> > %3D&reserved=0
> >  For correct type of image creation:
> >
> >
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat
> >
> chwork.ozlabs.org%2Fpatch%2F671466%2F&data=01%7C01%7Cyork.sun%40
> nxp.co
> >
> m%7Cb6b2df7806744cde8d4508d47a8065e0%7C686ea1d3bc2b4c6fa92cd99c5
> c30163
> >
> 5%7C0&sdata=i7xPTeYu4AGy%2BzGCeGvptGmTTR8H8roYkWk46%2FiibRM%
> 3D&reserve
> > d=0
> >
> >  arch/arm/cpu/armv8/fsl-layerscape/cpu.c            |  6 +--
> >  .../cpu/armv8/fsl-layerscape/fsl_lsch3_serdes.c    |  6 +--
> >  board/freescale/ls2080a/ls2080a.c                  |  6 +--
> >  board/freescale/ls2080aqds/eth.c                   |  8 +---
> >  board/freescale/ls2080aqds/ls2080aqds.c            |  4 +-
> >  configs/ls2080aqds_sdcard_defconfig                | 54
> ++++++++++++++++++++++
> >  include/configs/ls2080aqds.h                       |  9 +++-
> >  7 files changed, 75 insertions(+), 18 deletions(-)  create mode
> > 100644 configs/ls2080aqds_sdcard_defconfig
> >
> 
> Please update MAINTAINERS file and add commit message. Please squash
> your patch which enables PPA for this boot config
> http://patchwork.ozlabs.org/patch/741504/
> 
> York
[Santan Kumar] Ok, I will update the MAINTAINERS file and PPA patch.
In commit message: This patch adds SD boot support for LS2080aqds board.
    The SD boot image need to be programmed into the sdcard first.
    Then the booting will start from sd card.
 Is it ok or do you want me to add any specific information?