[U-Boot] [PATCH][v2] board: ls2080ardb: Add phy number for serdes1 protocol 0x4b

[Santan Kumar]

Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
---
Changes for v2:
 Changed the subject

 board/freescale/ls2080ardb/eth_ls2080rdb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c
index 799799c..ba584c8 100644
--- a/board/freescale/ls2080ardb/eth_ls2080rdb.c
+++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c
@@ -62,6 +62,13 @@ int board_eth_init(bd_t *bis)
 		wriop_set_phy_address(WRIOP1_DPMAC8, AQ_PHY_ADDR4);
 
 		break;
+	case 0x4B:
+		wriop_set_phy_address(WRIOP1_DPMAC1, CORTINA_PHY_ADDR1);
+		wriop_set_phy_address(WRIOP1_DPMAC2, CORTINA_PHY_ADDR2);
+		wriop_set_phy_address(WRIOP1_DPMAC3, CORTINA_PHY_ADDR3);
+		wriop_set_phy_address(WRIOP1_DPMAC4, CORTINA_PHY_ADDR4);
+
+		break;
 	default:
 		printf("SerDes1 protocol 0x%x is not supported on LS2080aRDB\n",
 		       srds_s1);
-- 
1.9.1