[U-Boot] [PATCH v7 1/3] arm: dts: update Meson GXBB / Odroid-C2 DT with recent Linux version
Jaehoon Chung
jh80.chung at samsung.com
Fri Apr 14 06:21:59 UTC 2017
On 04/13/2017 03:28 AM, Heiner Kallweit wrote:
> As a prerequisite for adding a Meson GX MMC driver update the
> Meson GXBB / Odroid-C2 device tree in Uboot with the latest
> version from Linux.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> Signed-off-by: Carlo Caione <carlo at endlessm.com>
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
Applied to u-boot-mmc. Thanks!
Best Regards,
Jaehoon Chung
> ---
> v4:
> - Added SoB of original authors
> v5:
> - no changes
> v6:
> - changed prefix in subject
> v7:
> - rebased
> ---
> arch/arm/dts/meson-gx.dtsi | 447 ++++++++++++++++++++
> arch/arm/dts/meson-gxbb-odroidc2.dts | 147 ++++++-
> arch/arm/dts/meson-gxbb.dtsi | 718 ++++++++++++++++++++------------
> include/dt-bindings/clock/gxbb-aoclkc.h | 66 +++
> include/dt-bindings/clock/gxbb-clkc.h | 34 ++
> include/dt-bindings/reset/gxbb-aoclkc.h | 66 +++
> 6 files changed, 1203 insertions(+), 275 deletions(-)
> create mode 100644 arch/arm/dts/meson-gx.dtsi
> create mode 100644 include/dt-bindings/clock/gxbb-aoclkc.h
> create mode 100644 include/dt-bindings/clock/gxbb-clkc.h
> create mode 100644 include/dt-bindings/reset/gxbb-aoclkc.h
>
> diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi
> new file mode 100644
> index 0000000..c129100
> --- /dev/null
> +++ b/arch/arm/dts/meson-gx.dtsi
> @@ -0,0 +1,447 @@
> +/*
> + * Copyright (c) 2016 Andreas Färber
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo at endlessm.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 16 MiB reserved for Hardware ROM Firmware */
> + hwrom_reserved: hwrom at 0 {
> + reg = <0x0 0x0 0x0 0x1000000>;
> + no-map;
> + };
> +
> + /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
> + secmon_reserved: secmon at 10000000 {
> + reg = <0x0 0x10000000 0x0 0x200000>;
> + no-map;
> + };
> + };
> +
> + cpus {
> + #address-cells = <0x2>;
> + #size-cells = <0x0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + clocks = <&scpi_dvfs 0>;
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + clocks = <&scpi_dvfs 0>;
> + };
> +
> + cpu2: cpu at 2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + clocks = <&scpi_dvfs 0>;
> + };
> +
> + cpu3: cpu at 3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + next-level-cache = <&l2>;
> + clocks = <&scpi_dvfs 0>;
> + };
> +
> + l2: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + arm-pmu {
> + compatible = "arm,cortex-a53-pmu";
> + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13
> + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14
> + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11
> + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10
> + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + xtal: xtal-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal";
> + #clock-cells = <0>;
> + };
> +
> + firmware {
> + sm: secure-monitor {
> + compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
> + };
> + };
> +
> + efuse: efuse {
> + compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + sn: sn at 14 {
> + reg = <0x14 0x10>;
> + };
> +
> + eth_mac: eth_mac at 34 {
> + reg = <0x34 0x10>;
> + };
> +
> + bid: bid at 46 {
> + reg = <0x46 0x30>;
> + };
> + };
> +
> + scpi {
> + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
> + mboxes = <&mailbox 1 &mailbox 2>;
> + shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
> +
> + scpi_clocks: clocks {
> + compatible = "arm,scpi-clocks";
> +
> + scpi_dvfs: scpi_clocks at 0 {
> + compatible = "arm,scpi-dvfs-clocks";
> + #clock-cells = <1>;
> + clock-indices = <0>;
> + clock-output-names = "vcpu";
> + };
> + };
> +
> + scpi_sensors: sensors {
> + compatible = "arm,scpi-sensors";
> + #thermal-sensor-cells = <1>;
> + };
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + cbus: cbus at c1100000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xc1100000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
> +
> + reset: reset-controller at 4404 {
> + compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
> + reg = <0x0 0x04404 0x0 0x20>;
> + #reset-cells = <1>;
> + };
> +
> + uart_A: serial at 84c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0x84c0 0x0 0x14>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + uart_B: serial at 84dc {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0x84dc 0x0 0x14>;
> + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + i2c_A: i2c at 8500 {
> + compatible = "amlogic,meson-gxbb-i2c";
> + reg = <0x0 0x08500 0x0 0x20>;
> + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + pwm_ab: pwm at 8550 {
> + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
> + reg = <0x0 0x08550 0x0 0x10>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm_cd: pwm at 8650 {
> + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
> + reg = <0x0 0x08650 0x0 0x10>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + pwm_ef: pwm at 86c0 {
> + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
> + reg = <0x0 0x086c0 0x0 0x10>;
> + #pwm-cells = <3>;
> + status = "disabled";
> + };
> +
> + uart_C: serial at 8700 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0x8700 0x0 0x14>;
> + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + i2c_B: i2c at 87c0 {
> + compatible = "amlogic,meson-gxbb-i2c";
> + reg = <0x0 0x087c0 0x0 0x20>;
> + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c_C: i2c at 87e0 {
> + compatible = "amlogic,meson-gxbb-i2c";
> + reg = <0x0 0x087e0 0x0 0x20>;
> + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + watchdog at 98d0 {
> + compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
> + reg = <0x0 0x098d0 0x0 0x10>;
> + clocks = <&xtal>;
> + };
> + };
> +
> + gic: interrupt-controller at c4301000 {
> + compatible = "arm,gic-400";
> + reg = <0x0 0xc4301000 0 0x1000>,
> + <0x0 0xc4302000 0 0x2000>,
> + <0x0 0xc4304000 0 0x2000>,
> + <0x0 0xc4306000 0 0x2000>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9
> + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + };
> +
> + sram: sram at c8000000 {
> + compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
> + reg = <0x0 0xc8000000 0x0 0x14000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0xc8000000 0x14000>;
> +
> + cpu_scp_lpri: scp-shmem at 0 {
> + compatible = "amlogic,meson-gxbb-scp-shmem";
> + reg = <0x13000 0x400>;
> + };
> +
> + cpu_scp_hpri: scp-shmem at 200 {
> + compatible = "amlogic,meson-gxbb-scp-shmem";
> + reg = <0x13400 0x400>;
> + };
> + };
> +
> + aobus: aobus at c8100000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xc8100000 0x0 0x100000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
> +
> + uart_AO: serial at 4c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0x004c0 0x0 0x14>;
> + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + uart_AO_B: serial at 4e0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0x004e0 0x0 0x14>;
> + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + ir: ir at 580 {
> + compatible = "amlogic,meson-gxbb-ir";
> + reg = <0x0 0x00580 0x0 0x40>;
> + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> + };
> +
> + periphs: periphs at c8834000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xc8834000 0x0 0x2000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
> +
> + rng {
> + compatible = "amlogic,meson-rng";
> + reg = <0x0 0x0 0x0 0x4>;
> + };
> + };
> +
> +
> + hiubus: hiubus at c883c000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xc883c000 0x0 0x2000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
> +
> + mailbox: mailbox at 404 {
> + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
> + reg = <0 0x404 0 0x4c>;
> + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
> + <0 209 IRQ_TYPE_EDGE_RISING>,
> + <0 210 IRQ_TYPE_EDGE_RISING>;
> + #mbox-cells = <1>;
> + };
> + };
> +
> + ethmac: ethernet at c9410000 {
> + compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4>;
> + interrupts = <0 8 1>;
> + interrupt-names = "macirq";
> + phy-mode = "rgmii";
> + status = "disabled";
> + };
> +
> + apb: apb at d0000000 {
> + compatible = "simple-bus";
> + reg = <0x0 0xd0000000 0x0 0x200000>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
> +
> + sd_emmc_a: mmc at 70000 {
> + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> + reg = <0x0 0x70000 0x0 0x2000>;
> + interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> +
> + sd_emmc_b: mmc at 72000 {
> + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> + reg = <0x0 0x72000 0x0 0x2000>;
> + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> +
> + sd_emmc_c: mmc at 74000 {
> + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
> + reg = <0x0 0x74000 0x0 0x2000>;
> + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
> + status = "disabled";
> + };
> + };
> +
> + vpu: vpu at d0100000 {
> + compatible = "amlogic,meson-gx-vpu";
> + reg = <0x0 0xd0100000 0x0 0x100000>,
> + <0x0 0xc883c000 0x0 0x1000>,
> + <0x0 0xc8838000 0x0 0x1000>;
> + reg-names = "vpu", "hhi", "dmc";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + /* CVBS VDAC output port */
> + cvbs_vdac_port: port at 0 {
> + reg = <0>;
> + };
> + };
> + };
> +};
> diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
> index 79bee64..c737183 100644
> --- a/arch/arm/dts/meson-gxbb-odroidc2.dts
> +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
> @@ -64,6 +64,18 @@
> reg = <0x0 0x0 0x0 0x80000000>;
> };
>
> + usb_otg_pwr: regulator-usb-pwrs {
> + compatible = "regulator-fixed";
> +
> + regulator-name = "USB_OTG_PWR";
> +
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> leds {
> compatible = "gpio-leds";
> blue {
> @@ -73,6 +85,60 @@
> default-state = "off";
> };
> };
> +
> + tflash_vdd: regulator-tflash_vdd {
> + /*
> + * signal name from schematics: TFLASH_VDD_EN
> + */
> + compatible = "regulator-fixed";
> +
> + regulator-name = "TFLASH_VDD";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + tf_io: gpio-regulator-tf_io {
> + compatible = "regulator-gpio";
> +
> + regulator-name = "TF_IO";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + /*
> + * signal name from schematics: TF_3V3N_1V8_EN
> + */
> + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
> + gpios-states = <0>;
> +
> + states = <3300000 0
> + 1800000 1>;
> + };
> +
> + vcc1v8: regulator-vcc1v8 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC1V8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vcc3v3: regulator-vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&scpi_clocks {
> + status = "disabled";
> };
>
> &uart_AO {
> @@ -83,6 +149,85 @@
>
> ðmac {
> status = "okay";
> - pinctrl-0 = <ð_pins>;
> + pinctrl-0 = <ð_rgmii_pins>;
> + pinctrl-names = "default";
> + phy-handle = <ð_phy0>;
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eth_phy0: ethernet-phy at 0 {
> + reg = <0>;
> + eee-broken-1000t;
> + };
> + };
> +};
> +
> +&ir {
> + status = "okay";
> + pinctrl-0 = <&remote_input_ao_pins>;
> pinctrl-names = "default";
> };
> +
> +&i2c_A {
> + status = "okay";
> + pinctrl-0 = <&i2c_a_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&usb0_phy {
> + status = "okay";
> + phy-supply = <&usb_otg_pwr>;
> +};
> +
> +&usb1_phy {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> +/* SD */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <100000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
> + cd-inverted;
> +
> + vmmc-supply = <&tflash_vdd>;
> + vqmmc-supply = <&tf_io>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>;
> + pinctrl-names = "default";
> +
> + bus-width = <8>;
> + cap-sd-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + cap-mmc-highspeed;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc3v3>;
> + vqmmc-supply = <&vcc1v8>;
> +};
> diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi
> index e502c24..39a774a 100644
> --- a/arch/arm/dts/meson-gxbb.dtsi
> +++ b/arch/arm/dts/meson-gxbb.dtsi
> @@ -40,307 +40,477 @@
> * OTHER DEALINGS IN THE SOFTWARE.
> */
>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "meson-gx.dtsi"
> #include <dt-bindings/gpio/meson-gxbb-gpio.h>
> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
> +#include <dt-bindings/clock/gxbb-clkc.h>
> +#include <dt-bindings/clock/gxbb-aoclkc.h>
> +#include <dt-bindings/reset/gxbb-aoclkc.h>
>
> / {
> compatible = "amlogic,meson-gxbb";
> - interrupt-parent = <&gic>;
> - #address-cells = <2>;
> - #size-cells = <2>;
>
> - cpus {
> - #address-cells = <0x2>;
> - #size-cells = <0x0>;
> -
> - cpu0: cpu at 0 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a53", "arm,armv8";
> - reg = <0x0 0x0>;
> - enable-method = "psci";
> + soc {
> + usb0_phy: phy at c0000000 {
> + compatible = "amlogic,meson-gxbb-usb2-phy";
> + #phy-cells = <0>;
> + reg = <0x0 0xc0000000 0x0 0x20>;
> + resets = <&reset RESET_USB_OTG>;
> + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
> + clock-names = "usb_general", "usb";
> + status = "disabled";
> };
>
> - cpu1: cpu at 1 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a53", "arm,armv8";
> - reg = <0x0 0x1>;
> - enable-method = "psci";
> + usb1_phy: phy at c0000020 {
> + compatible = "amlogic,meson-gxbb-usb2-phy";
> + #phy-cells = <0>;
> + reg = <0x0 0xc0000020 0x0 0x20>;
> + resets = <&reset RESET_USB_OTG>;
> + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
> + clock-names = "usb_general", "usb";
> + status = "disabled";
> };
>
> - cpu2: cpu at 2 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a53", "arm,armv8";
> - reg = <0x0 0x2>;
> - enable-method = "psci";
> + usb0: usb at c9000000 {
> + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
> + reg = <0x0 0xc9000000 0x0 0x40000>;
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
> + clock-names = "otg";
> + phys = <&usb0_phy>;
> + phy-names = "usb2-phy";
> + dr_mode = "host";
> + status = "disabled";
> };
>
> - cpu3: cpu at 3 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a53", "arm,armv8";
> - reg = <0x0 0x3>;
> - enable-method = "psci";
> + usb1: usb at c9100000 {
> + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
> + reg = <0x0 0xc9100000 0x0 0x40000>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
> + clock-names = "otg";
> + phys = <&usb1_phy>;
> + phy-names = "usb2-phy";
> + dr_mode = "host";
> + status = "disabled";
> };
> };
> +};
>
> - arm-pmu {
> - compatible = "arm,cortex-a53-pmu";
> - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
> - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
> +&cbus {
> + spifc: spi at 8c80 {
> + compatible = "amlogic,meson-gxbb-spifc";
> + reg = <0x0 0x08c80 0x0 0x80>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&clkc CLKID_SPI>;
> + status = "disabled";
> };
> +};
> +
> +ðmac {
> + clocks = <&clkc CLKID_ETH>,
> + <&clkc CLKID_FCLK_DIV2>,
> + <&clkc CLKID_MPLL2>;
> + clock-names = "stmmaceth", "clkin0", "clkin1";
> +};
> +
> +&aobus {
> + pinctrl_aobus: pinctrl at 14 {
> + compatible = "amlogic,meson-gxbb-aobus-pinctrl";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + gpio_ao: bank at 14 {
> + reg = <0x0 0x00014 0x0 0x8>,
> + <0x0 0x0002c 0x0 0x4>,
> + <0x0 0x00024 0x0 0x8>;
> + reg-names = "mux", "pull", "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + uart_ao_a_pins: uart_ao_a {
> + mux {
> + groups = "uart_tx_ao_a", "uart_rx_ao_a";
> + function = "uart_ao";
> + };
> + };
> +
> + uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
> + mux {
> + groups = "uart_cts_ao_a",
> + "uart_rts_ao_a";
> + function = "uart_ao";
> + };
> + };
> +
> + uart_ao_b_pins: uart_ao_b {
> + mux {
> + groups = "uart_tx_ao_b", "uart_rx_ao_b";
> + function = "uart_ao_b";
> + };
> + };
> +
> + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
> + mux {
> + groups = "uart_cts_ao_b",
> + "uart_rts_ao_b";
> + function = "uart_ao_b";
> + };
> + };
>
> - psci {
> - compatible = "arm,psci-0.2";
> - method = "smc";
> + remote_input_ao_pins: remote_input_ao {
> + mux {
> + groups = "remote_input_ao";
> + function = "remote_input_ao";
> + };
> + };
> +
> + i2c_ao_pins: i2c_ao {
> + mux {
> + groups = "i2c_sck_ao",
> + "i2c_sda_ao";
> + function = "i2c_ao";
> + };
> + };
> +
> + pwm_ao_a_3_pins: pwm_ao_a_3 {
> + mux {
> + groups = "pwm_ao_a_3";
> + function = "pwm_ao_a_3";
> + };
> + };
> +
> + pwm_ao_a_6_pins: pwm_ao_a_6 {
> + mux {
> + groups = "pwm_ao_a_6";
> + function = "pwm_ao_a_6";
> + };
> + };
> +
> + pwm_ao_a_12_pins: pwm_ao_a_12 {
> + mux {
> + groups = "pwm_ao_a_12";
> + function = "pwm_ao_a_12";
> + };
> + };
> +
> + pwm_ao_b_pins: pwm_ao_b {
> + mux {
> + groups = "pwm_ao_b";
> + function = "pwm_ao_b";
> + };
> + };
> };
>
> - timer {
> - compatible = "arm,armv8-timer";
> - interrupts = <GIC_PPI 13
> - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
> - <GIC_PPI 14
> - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
> - <GIC_PPI 11
> - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
> - <GIC_PPI 10
> - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
> + clkc_AO: clock-controller at 040 {
> + compatible = "amlogic,gxbb-aoclkc";
> + reg = <0x0 0x00040 0x0 0x4>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> };
>
> - xtal: xtal-clk {
> - compatible = "fixed-clock";
> - clock-frequency = <24000000>;
> - clock-output-names = "xtal";
> - #clock-cells = <0>;
> + pwm_ab_AO: pwm at 550 {
> + compatible = "amlogic,meson-gxbb-pwm";
> + reg = <0x0 0x0550 0x0 0x10>;
> + #pwm-cells = <3>;
> + status = "disabled";
> };
>
> - soc {
> - compatible = "simple-bus";
> + i2c_AO: i2c at 500 {
> + compatible = "amlogic,meson-gxbb-i2c";
> + reg = <0x0 0x500 0x0 0x20>;
> + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_AO_I2C>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +};
> +
> +&periphs {
> + pinctrl_periphs: pinctrl at 4b0 {
> + compatible = "amlogic,meson-gxbb-periphs-pinctrl";
> #address-cells = <2>;
> #size-cells = <2>;
> ranges;
>
> - cbus: cbus at c1100000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xc1100000 0x0 0x100000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
> -
> - reset: reset-controller at 4404 {
> - compatible = "amlogic,meson-gxbb-reset";
> - reg = <0x0 0x04404 0x0 0x20>;
> - #reset-cells = <1>;
> - };
> -
> - uart_A: serial at 84c0 {
> - compatible = "amlogic,meson-uart";
> - reg = <0x0 0x84c0 0x0 0x14>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>;
> - status = "disabled";
> - };
> -
> - uart_B: serial at 84dc {
> - compatible = "amlogic,meson-uart";
> - reg = <0x0 0x84dc 0x0 0x14>;
> - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>;
> - status = "disabled";
> - };
> -
> - uart_C: serial at 8700 {
> - compatible = "amlogic,meson-uart";
> - reg = <0x0 0x8700 0x0 0x14>;
> - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>;
> - status = "disabled";
> - };
> - };
> -
> - gic: interrupt-controller at c4301000 {
> - compatible = "arm,gic-400";
> - reg = <0x0 0xc4301000 0 0x1000>,
> - <0x0 0xc4302000 0 0x2000>,
> - <0x0 0xc4304000 0 0x2000>,
> - <0x0 0xc4306000 0 0x2000>;
> - interrupt-controller;
> - interrupts = <GIC_PPI 9
> - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
> - #interrupt-cells = <3>;
> - #address-cells = <0>;
> - };
> -
> - aobus: aobus at c8100000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xc8100000 0x0 0x100000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
> -
> - pinctrl_aobus: pinctrl at 14 {
> - compatible = "amlogic,meson-gxbb-aobus-pinctrl";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - gpio_ao: bank at 14 {
> - reg = <0x0 0x00014 0x0 0x8>,
> - <0x0 0x0002c 0x0 0x4>,
> - <0x0 0x00024 0x0 0x8>;
> - reg-names = "mux", "pull", "gpio";
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - uart_ao_a_pins: uart_ao_a {
> - mux {
> - groups = "uart_tx_ao_a", "uart_rx_ao_a";
> - function = "uart_ao";
> - };
> - };
> - };
> -
> - uart_AO: serial at 4c0 {
> - compatible = "amlogic,meson-uart";
> - reg = <0x0 0x004c0 0x0 0x14>;
> - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
> - clocks = <&xtal>;
> - status = "disabled";
> - };
> - };
> -
> - periphs: periphs at c8834000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xc8834000 0x0 0x2000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
> -
> - rng {
> - compatible = "amlogic,meson-rng";
> - reg = <0x0 0x0 0x0 0x4>;
> - };
> -
> - pinctrl_periphs: pinctrl at 4b0 {
> - compatible = "amlogic,meson-gxbb-periphs-pinctrl";
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> -
> - gpio: bank at 4b0 {
> - reg = <0x0 0x004b0 0x0 0x28>,
> - <0x0 0x004e8 0x0 0x14>,
> - <0x0 0x00120 0x0 0x14>,
> - <0x0 0x00430 0x0 0x40>;
> - reg-names = "mux", "pull", "pull-enable", "gpio";
> - gpio-controller;
> - #gpio-cells = <2>;
> - };
> -
> - emmc_pins: emmc {
> - mux {
> - groups = "emmc_nand_d07",
> - "emmc_cmd",
> - "emmc_clk";
> - function = "emmc";
> - };
> - };
> -
> - sdcard_pins: sdcard {
> - mux {
> - groups = "sdcard_d0",
> - "sdcard_d1",
> - "sdcard_d2",
> - "sdcard_d3",
> - "sdcard_cmd",
> - "sdcard_clk";
> - function = "sdcard";
> - };
> - };
> -
> - uart_a_pins: uart_a {
> - mux {
> - groups = "uart_tx_a",
> - "uart_rx_a";
> - function = "uart_a";
> - };
> - };
> -
> - uart_b_pins: uart_b {
> - mux {
> - groups = "uart_tx_b",
> - "uart_rx_b";
> - function = "uart_b";
> - };
> - };
> -
> - uart_c_pins: uart_c {
> - mux {
> - groups = "uart_tx_c",
> - "uart_rx_c";
> - function = "uart_c";
> - };
> - };
> -
> - eth_pins: eth_c {
> - mux {
> - groups = "eth_mdio",
> - "eth_mdc",
> - "eth_clk_rx_clk",
> - "eth_rx_dv",
> - "eth_rxd0",
> - "eth_rxd1",
> - "eth_rxd2",
> - "eth_rxd3",
> - "eth_rgmii_tx_clk",
> - "eth_tx_en",
> - "eth_txd0",
> - "eth_txd1",
> - "eth_txd2",
> - "eth_txd3";
> - function = "eth";
> - };
> - };
> - };
> - };
> -
> - hiubus: hiubus at c883c000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xc883c000 0x0 0x2000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
> -
> - clkc: clock-controller at 0 {
> - compatible = "amlogic,gxbb-clkc";
> - #clock-cells = <1>;
> - reg = <0x0 0x0 0x0 0x3db>;
> - };
> - };
> -
> - apb: apb at d0000000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xd0000000 0x0 0x200000>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
> - };
> -
> - ethmac: ethernet at c9410000 {
> - compatible = "amlogic,meson6-dwmac", "snps,dwmac";
> - reg = <0x0 0xc9410000 0x0 0x10000
> - 0x0 0xc8834540 0x0 0x4>;
> - interrupts = <0 8 1>;
> - interrupt-names = "macirq";
> - clocks = <&xtal>;
> - clock-names = "stmmaceth";
> - phy-mode = "rgmii";
> - status = "disabled";
> + gpio: bank at 4b0 {
> + reg = <0x0 0x004b0 0x0 0x28>,
> + <0x0 0x004e8 0x0 0x14>,
> + <0x0 0x00120 0x0 0x14>,
> + <0x0 0x00430 0x0 0x40>;
> + reg-names = "mux", "pull", "pull-enable", "gpio";
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + emmc_pins: emmc {
> + mux {
> + groups = "emmc_nand_d07",
> + "emmc_cmd",
> + "emmc_clk",
> + "emmc_ds";
> + function = "emmc";
> + };
> + };
> +
> + nor_pins: nor {
> + mux {
> + groups = "nor_d",
> + "nor_q",
> + "nor_c",
> + "nor_cs";
> + function = "nor";
> + };
> + };
> +
> + sdcard_pins: sdcard {
> + mux {
> + groups = "sdcard_d0",
> + "sdcard_d1",
> + "sdcard_d2",
> + "sdcard_d3",
> + "sdcard_cmd",
> + "sdcard_clk";
> + function = "sdcard";
> + };
> + };
> +
> + sdio_pins: sdio {
> + mux {
> + groups = "sdio_d0",
> + "sdio_d1",
> + "sdio_d2",
> + "sdio_d3",
> + "sdio_cmd",
> + "sdio_clk";
> + function = "sdio";
> + };
> + };
> +
> + sdio_irq_pins: sdio_irq {
> + mux {
> + groups = "sdio_irq";
> + function = "sdio";
> + };
> + };
> +
> + uart_a_pins: uart_a {
> + mux {
> + groups = "uart_tx_a",
> + "uart_rx_a";
> + function = "uart_a";
> + };
> + };
> +
> + uart_a_cts_rts_pins: uart_a_cts_rts {
> + mux {
> + groups = "uart_cts_a",
> + "uart_rts_a";
> + function = "uart_a";
> + };
> + };
> +
> + uart_b_pins: uart_b {
> + mux {
> + groups = "uart_tx_b",
> + "uart_rx_b";
> + function = "uart_b";
> + };
> + };
> +
> + uart_b_cts_rts_pins: uart_b_cts_rts {
> + mux {
> + groups = "uart_cts_b",
> + "uart_rts_b";
> + function = "uart_b";
> + };
> + };
> +
> + uart_c_pins: uart_c {
> + mux {
> + groups = "uart_tx_c",
> + "uart_rx_c";
> + function = "uart_c";
> + };
> + };
> +
> + uart_c_cts_rts_pins: uart_c_cts_rts {
> + mux {
> + groups = "uart_cts_c",
> + "uart_rts_c";
> + function = "uart_c";
> + };
> + };
> +
> + i2c_a_pins: i2c_a {
> + mux {
> + groups = "i2c_sck_a",
> + "i2c_sda_a";
> + function = "i2c_a";
> + };
> + };
> +
> + i2c_b_pins: i2c_b {
> + mux {
> + groups = "i2c_sck_b",
> + "i2c_sda_b";
> + function = "i2c_b";
> + };
> + };
> +
> + i2c_c_pins: i2c_c {
> + mux {
> + groups = "i2c_sck_c",
> + "i2c_sda_c";
> + function = "i2c_c";
> + };
> + };
> +
> + eth_rgmii_pins: eth-rgmii {
> + mux {
> + groups = "eth_mdio",
> + "eth_mdc",
> + "eth_clk_rx_clk",
> + "eth_rx_dv",
> + "eth_rxd0",
> + "eth_rxd1",
> + "eth_rxd2",
> + "eth_rxd3",
> + "eth_rgmii_tx_clk",
> + "eth_tx_en",
> + "eth_txd0",
> + "eth_txd1",
> + "eth_txd2",
> + "eth_txd3";
> + function = "eth";
> + };
> + };
> +
> + eth_rmii_pins: eth-rmii {
> + mux {
> + groups = "eth_mdio",
> + "eth_mdc",
> + "eth_clk_rx_clk",
> + "eth_rx_dv",
> + "eth_rxd0",
> + "eth_rxd1",
> + "eth_tx_en",
> + "eth_txd0",
> + "eth_txd1";
> + function = "eth";
> + };
> + };
> +
> + pwm_a_x_pins: pwm_a_x {
> + mux {
> + groups = "pwm_a_x";
> + function = "pwm_a_x";
> + };
> + };
> +
> + pwm_a_y_pins: pwm_a_y {
> + mux {
> + groups = "pwm_a_y";
> + function = "pwm_a_y";
> + };
> + };
> +
> + pwm_b_pins: pwm_b {
> + mux {
> + groups = "pwm_b";
> + function = "pwm_b";
> + };
> + };
> +
> + pwm_d_pins: pwm_d {
> + mux {
> + groups = "pwm_d";
> + function = "pwm_d";
> + };
> + };
> +
> + pwm_e_pins: pwm_e {
> + mux {
> + groups = "pwm_e";
> + function = "pwm_e";
> + };
> + };
> +
> + pwm_f_x_pins: pwm_f_x {
> + mux {
> + groups = "pwm_f_x";
> + function = "pwm_f_x";
> + };
> + };
> +
> + pwm_f_y_pins: pwm_f_y {
> + mux {
> + groups = "pwm_f_y";
> + function = "pwm_f_y";
> + };
> + };
> +
> + hdmi_hpd_pins: hdmi_hpd {
> + mux {
> + groups = "hdmi_hpd";
> + function = "hdmi_hpd";
> + };
> + };
> +
> + hdmi_i2c_pins: hdmi_i2c {
> + mux {
> + groups = "hdmi_sda", "hdmi_scl";
> + function = "hdmi_i2c";
> + };
> };
> };
> };
> +
> +&hiubus {
> + clkc: clock-controller at 0 {
> + compatible = "amlogic,gxbb-clkc";
> + #clock-cells = <1>;
> + reg = <0x0 0x0 0x0 0x3db>;
> + };
> +};
> +
> +&i2c_A {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> +&i2c_B {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> +&i2c_C {
> + clocks = <&clkc CLKID_I2C>;
> +};
> +
> +&sd_emmc_a {
> + clocks = <&clkc CLKID_SD_EMMC_A>,
> + <&xtal>,
> + <&clkc CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> +};
> +
> +&sd_emmc_b {
> + clocks = <&clkc CLKID_SD_EMMC_B>,
> + <&xtal>,
> + <&clkc CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> +};
> +
> +&sd_emmc_c {
> + clocks = <&clkc CLKID_SD_EMMC_C>,
> + <&xtal>,
> + <&clkc CLKID_FCLK_DIV2>;
> + clock-names = "core", "clkin0", "clkin1";
> +};
> +
> +&vpu {
> + compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> +};
> diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h
> new file mode 100644
> index 0000000..3175148
> --- /dev/null
> +++ b/include/dt-bindings/clock/gxbb-aoclkc.h
> @@ -0,0 +1,66 @@
> +/*
> + * This file is provided under a dual BSD/GPLv2 license. When using or
> + * redistributing this file, you may do so under either license.
> + *
> + * GPL LICENSE SUMMARY
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of version 2 of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + * The full GNU General Public License is included in this distribution
> + * in the file called COPYING.
> + *
> + * BSD LICENSE
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
> +#define DT_BINDINGS_CLOCK_AMLOGIC_MESON_GXBB_AOCLK
> +
> +#define CLKID_AO_REMOTE 0
> +#define CLKID_AO_I2C_MASTER 1
> +#define CLKID_AO_I2C_SLAVE 2
> +#define CLKID_AO_UART1 3
> +#define CLKID_AO_UART2 4
> +#define CLKID_AO_IR_BLASTER 5
> +
> +#endif
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> new file mode 100644
> index 0000000..692846c
> --- /dev/null
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -0,0 +1,34 @@
> +/*
> + * GXBB clock tree IDs
> + */
> +
> +#ifndef __GXBB_CLKC_H
> +#define __GXBB_CLKC_H
> +
> +#define CLKID_CPUCLK 1
> +#define CLKID_HDMI_PLL 2
> +#define CLKID_FCLK_DIV2 4
> +#define CLKID_FCLK_DIV3 5
> +#define CLKID_FCLK_DIV4 6
> +#define CLKID_CLK81 12
> +#define CLKID_MPLL2 15
> +#define CLKID_SPI 34
> +#define CLKID_I2C 22
> +#define CLKID_SAR_ADC 23
> +#define CLKID_ETH 36
> +#define CLKID_USB0 50
> +#define CLKID_USB1 51
> +#define CLKID_USB 55
> +#define CLKID_HDMI_PCLK 63
> +#define CLKID_USB1_DDR_BRIDGE 64
> +#define CLKID_USB0_DDR_BRIDGE 65
> +#define CLKID_SANA 69
> +#define CLKID_GCLK_VENCI_INT0 77
> +#define CLKID_AO_I2C 93
> +#define CLKID_SD_EMMC_A 94
> +#define CLKID_SD_EMMC_B 95
> +#define CLKID_SD_EMMC_C 96
> +#define CLKID_SAR_ADC_CLK 97
> +#define CLKID_SAR_ADC_SEL 98
> +
> +#endif /* __GXBB_CLKC_H */
> diff --git a/include/dt-bindings/reset/gxbb-aoclkc.h b/include/dt-bindings/reset/gxbb-aoclkc.h
> new file mode 100644
> index 0000000..9e3fd60
> --- /dev/null
> +++ b/include/dt-bindings/reset/gxbb-aoclkc.h
> @@ -0,0 +1,66 @@
> +/*
> + * This file is provided under a dual BSD/GPLv2 license. When using or
> + * redistributing this file, you may do so under either license.
> + *
> + * GPL LICENSE SUMMARY
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of version 2 of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, see <http://www.gnu.org/licenses/>.
> + * The full GNU General Public License is included in this distribution
> + * in the file called COPYING.
> + *
> + * BSD LICENSE
> + *
> + * Copyright (c) 2016 BayLibre, SAS.
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Intel Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +#ifndef DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
> +#define DT_BINDINGS_RESET_AMLOGIC_MESON_GXBB_AOCLK
> +
> +#define RESET_AO_REMOTE 0
> +#define RESET_AO_I2C_MASTER 1
> +#define RESET_AO_I2C_SLAVE 2
> +#define RESET_AO_UART1 3
> +#define RESET_AO_UART2 4
> +#define RESET_AO_IR_BLASTER 5
> +
> +#endif
>
More information about the U-Boot
mailing list