[U-Boot] [PATCH 1/2] arm: dts: odroid-c2: assign mmc device number 0 to eMMC slot

Andreas Färber afaerber at suse.de
Fri Apr 14 13:39:04 UTC 2017


Am 14.04.2017 um 10:24 schrieb Heiner Kallweit:
> In most cases Odroid C2 is used with a eMMC card. So far the eMMC slot
> was assigned dev number 1 (0 is the SD slot). So on uboot prompt

U-Boot

> we had to manually switch the mmc device first. Therefore change the
> device number assignment.

Objection, this differs from Linux and will be overwritten on next dts sync.

Regards,
Andreas

> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>
> ---
>  arch/arm/dts/meson-gxbb-odroidc2.dts | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts
> index c737183..5ec67ca 100644
> --- a/arch/arm/dts/meson-gxbb-odroidc2.dts
> +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts
> @@ -53,6 +53,8 @@
>  
>  	aliases {
>  		serial0 = &uart_AO;
> +		mmc0 = &sd_emmc_c;
> +		mmc1 = &sd_emmc_b;
>  	};
>  
>  	chosen {
> 


-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)


More information about the U-Boot mailing list