[U-Boot] [PATCH] Set ramdisk_addr_r to a higher address location on meson-gxbb.

[Vagrant Cascadian]

On 2017-04-12, Tom Rini wrote:
> We also need to start setting bootm_size.  Quoting myself from
> include/configs/ti_armv7_common.h:
> /*
>  * We setup defaults based on constraints from the Linux kernel, which should
>  * also be safe elsewhere.  We have the default load at 32MB into DDR (for
>  * the kernel), FDT above 128MB (the maximum location for the end of the
>  * kernel), and the ramdisk 512KB above that (allowing for hopefully never
>  * seen large trees).  We say all of this must be within the first 256MB
>  * as that will normally be within the kernel lowmem and thus visible via
>  * bootm_size and we only run on platforms with 256MB or more of memory.
>  */
> ...
>         "bootm_size=0x10000000\0" \

I mostly add the variables defined in doc/README.distro for boards I'm
adding distro_bootcmd support to, and there's no mention of bootm_size
there.

Are there other places that it would make more sense to document or add
documentation for this variable setting?

Does bootm_size impact bootz/booti as well, or is it just used with
bootm?


live well,
  vagrant
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170414/b8412291/attachment.sig>