[U-Boot] [PATCH 2/6] ARM: dts: at91: Add dts files for at91sam9n12ek

[Simon Glass]

On 12 April 2017 at 02:11, Wenyou Yang <wenyou.yang at atmel.com> wrote:
> The device tree source files of at91sam9n12ek boards are copied from
> the Linux v4.10, do the changes as below.
>  - Add the reg property for the pinctrl node.
>  - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's
>    slibling nodes, instead of the child nodes.
>  - Change the compatible of the spi flash to "spi-flash".
>  - Add the spi0 aliases.
>  - Fix the pinctrl-names of mmc0 node.
>  - Add the "u-boot,dm-pre-reloc" property to determine which nodes
>    are used by the board_init_f stage.
>  - Fix the compilation warnings.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
>  arch/arm/dts/Makefile          |    2 +
>  arch/arm/dts/at91sam9n12.dtsi  | 1064 ++++++++++++++++++++++++++++++++++++++++
>  arch/arm/dts/at91sam9n12ek.dts |  265 ++++++++++
>  3 files changed, 1331 insertions(+)
>  create mode 100644 arch/arm/dts/at91sam9n12.dtsi
>  create mode 100644 arch/arm/dts/at91sam9n12ek.dts

Reviewed-by: Simon Glass <sjg at chromium.org>