[U-Boot] [PATCH 5/6] ARM: dts: at91: Add dts files for at91sam9rlek

[Simon Glass]

On 12 April 2017 at 02:12, Wenyou Yang <wenyou.yang at atmel.com> wrote:
> The device tree source files of at91sam9rlek boards are copied from
> the Linux v4.10, do the changes as below.
>  - Add the reg property for the pinctrl node.
>  - Move the gpio (pioA, pioB, pioC, pioD) nodes as the pinctrl's
>    slibling nodes, instead of the child nodes.
>  - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used
>    in board_init_f stage.
>  - Fix the compilation warnings.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
>  arch/arm/dts/Makefile         |    2 +
>  arch/arm/dts/at91sam9rl.dtsi  | 1139 +++++++++++++++++++++++++++++++++++++++++
>  arch/arm/dts/at91sam9rlek.dts |  239 +++++++++
>  3 files changed, 1380 insertions(+)
>  create mode 100644 arch/arm/dts/at91sam9rl.dtsi
>  create mode 100644 arch/arm/dts/at91sam9rlek.dts

Reviewed-by: Simon Glass <sjg at chromium.org>