[U-Boot] [PATCH v2 4/6] ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek

[Simon Glass]

On 13 April 2017 at 19:11, Wenyou Yang <wenyou.yang at atmel.com> wrote:
> The device tree source files of at91sam9g20ek and at91sam9260ek
> boards are copied from the Linux v4.10, do the changes below.
>  - Fix the build error for the usb0 node.
>  - Add the reg property for the pinctrl node.
>  - Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
>    slibling nodes, instead of the child nodes.
>  - Add the "u-boot,dm-pre-reloc" property for the dbgu node are used
>    in board_init_f stage.
>  - Add the clk pinctrl of the mmc0 node.
>  - Fix the compilation warnings.
>
> Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
> ---
>
> Changes in v2: None
>
>  arch/arm/dts/Makefile                  |   5 +
>  arch/arm/dts/at91sam9260.dtsi          | 149 ++++++++++++----------
>  arch/arm/dts/at91sam9260ek.dts         | 215 +++++++++++++++++++++++++++++++
>  arch/arm/dts/at91sam9g20.dtsi          |   4 +-
>  arch/arm/dts/at91sam9g20ek.dts         |  29 +++++
>  arch/arm/dts/at91sam9g20ek_2mmc.dts    |  56 ++++++++
>  arch/arm/dts/at91sam9g20ek_common.dtsi | 227 +++++++++++++++++++++++++++++++++
>  7 files changed, 617 insertions(+), 68 deletions(-)
>  create mode 100644 arch/arm/dts/at91sam9260ek.dts
>  create mode 100644 arch/arm/dts/at91sam9g20ek.dts
>  create mode 100644 arch/arm/dts/at91sam9g20ek_2mmc.dts
>  create mode 100644 arch/arm/dts/at91sam9g20ek_common.dtsi