[U-Boot] [PATCH resend v2 01/13] sunxi: Split up long Kconfig lines

[Chen-Yu Tsai]

Currently we have some lines in board/sunxi/Kconfig that are very long.
These line either provide default values for a set of SoCs, or limit
some option to a subset of sunxi SoCs.

Fortunately Kconfig makes it easy to split them. The Kconfig language
document states

    If multiple dependencies are defined, they are connected with '&&'.

This means we can split existing dependencies at "&&" symbols. This
applies to both the "depends on" lines and "if" expressions.

This patch splits them up to one symbol per line. This will make it
easier to add, remove, or modify one item at a time.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 board/sunxi/Kconfig | 25 ++++++++++++++++++++-----
 1 file changed, 20 insertions(+), 5 deletions(-)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index a667c9e5c5c1..bd0019713984 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -159,7 +159,10 @@ endchoice
 # The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
 config MACH_SUN8I
 	bool
-	default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
+	default y if MACH_SUN8I_A23
+	default y if MACH_SUN8I_A33
+	default y if MACH_SUN8I_A83T
+	default y if MACH_SUNXI_H3_H5
 
 config RESERVE_ALLWINNER_BOOT0_HEADER
 	bool "reserve space for Allwinner boot0 header"
@@ -308,9 +311,13 @@ config DRAM_ODT_CORRECTION
 endif
 
 config SYS_CLK_FREQ
-	default 816000000 if MACH_SUN50I
+	default 1008000000 if MACH_SUN4I
+	default 1008000000 if MACH_SUN5I
+	default 1008000000 if MACH_SUN6I
 	default 912000000 if MACH_SUN7I
-	default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I || MACH_SUN9I
+	default 1008000000 if MACH_SUN8I
+	default 1008000000 if MACH_SUN9I
+	default 816000000 if MACH_SUN50I
 
 config SYS_CONFIG_NAME
 	default "sun4i" if MACH_SUN4I
@@ -512,7 +519,10 @@ config AXP_GPIO
 
 config VIDEO
 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
-	depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
+	depends on !MACH_SUN8I_A83T
+	depends on !MACH_SUNXI_H3_H5
+	depends on !MACH_SUN9I
+	depends on !MACH_SUN50I
 	default y
 	---help---
 	Say Y here to add support for using a cfb console on the HDMI, LCD
@@ -714,7 +724,12 @@ config GMAC_TX_DELAY
 	Set the GMAC Transmit Clock Delay Chain value.
 
 config SPL_STACK_R_ADDR
-	default 0x4fe00000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || MACH_SUN50I
+	default 0x4fe00000 if MACH_SUN4I
+	default 0x4fe00000 if MACH_SUN5I
+	default 0x4fe00000 if MACH_SUN6I
+	default 0x4fe00000 if MACH_SUN7I
+	default 0x4fe00000 if MACH_SUN8I
 	default 0x2fe00000 if MACH_SUN9I
+	default 0x4fe00000 if MACH_SUN50I
 
 endif
-- 
2.11.0