[U-Boot] [PATCH v3 4/6] ARM: dts: at91: Add dts files for at91sam9260ek/9g20ek
Wenyou Yang
wenyou.yang at atmel.com
Tue Apr 18 05:49:37 UTC 2017
The device tree source files of at91sam9g20ek and at91sam9260ek
boards are copied from the Linux v4.10, do the changes below.
- Fix the build error for the usb0 node.
- Add the reg property for the pinctrl node.
- Move the gpio (pioA, pioB, pioC ...) nodes as the pinctrl's
slibling nodes, instead of the child nodes.
- Add the "u-boot,dm-pre-reloc" property for the dbgu node are used
in board_init_f stage.
- Add the clk pinctrl of the mmc0 node.
- Fix the compilation warnings.
Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
---
Changes in v3: None
Changes in v2: None
arch/arm/dts/Makefile | 5 +
arch/arm/dts/at91sam9260.dtsi | 149 ++++++++++++----------
arch/arm/dts/at91sam9260ek.dts | 215 +++++++++++++++++++++++++++++++
arch/arm/dts/at91sam9g20.dtsi | 4 +-
arch/arm/dts/at91sam9g20ek.dts | 29 +++++
arch/arm/dts/at91sam9g20ek_2mmc.dts | 56 ++++++++
arch/arm/dts/at91sam9g20ek_common.dtsi | 227 +++++++++++++++++++++++++++++++++
7 files changed, 617 insertions(+), 68 deletions(-)
create mode 100644 arch/arm/dts/at91sam9260ek.dts
create mode 100644 arch/arm/dts/at91sam9g20ek.dts
create mode 100644 arch/arm/dts/at91sam9g20ek_2mmc.dts
create mode 100644 arch/arm/dts/at91sam9g20ek_common.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 2719769ad5..a3053e4252 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -346,6 +346,11 @@ dtb-$(CONFIG_SOC_KEYSTONE) += keystone-k2hk-evm.dtb \
keystone-k2e-evm.dtb \
keystone-k2g-evm.dtb
+dtb-$(CONFIG_TARGET_AT91SAM9260EK) += \
+ at91sam9260ek.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g20ek_2mmc.dtb
+
dtb-$(CONFIG_TARGET_AT91SAM9M10G45EK) += at91sam9m10g45ek.dtb
dtb-$(CONFIG_TARGET_AT91SAM9X5EK) += \
diff --git a/arch/arm/dts/at91sam9260.dtsi b/arch/arm/dts/at91sam9260.dtsi
index d4884dd1c2..0f25e336da 100644
--- a/arch/arm/dts/at91sam9260.dtsi
+++ b/arch/arm/dts/at91sam9260.dtsi
@@ -79,12 +79,14 @@
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ u-boot,dm-pre-reloc;
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
+ u-boot,dm-pre-reloc;
aic: interrupt-controller at fffff000 {
#interrupt-cells = <3>;
@@ -107,6 +109,7 @@
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
+ u-boot,dm-pre-reloc;
main_osc: main_osc {
compatible = "atmel,at91rm9200-clk-main-osc";
@@ -134,7 +137,7 @@
clocks = <&slow_rc_osc>, <&slow_xtal>;
};
- plla: pllack {
+ plla: pllack at 0 {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKA>;
@@ -146,7 +149,7 @@
<150000000 240000000 2 1>;
};
- pllb: pllbck {
+ pllb: pllbck at 1 {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKB>;
@@ -164,6 +167,7 @@
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
atmel,clk-output-range = <0 105000000>;
atmel,clk-divisors = <1 2 4 0>;
+ u-boot,dm-pre-reloc;
};
usb: usbck {
@@ -180,13 +184,13 @@
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
- prog0: prog0 {
+ prog0: prog at 0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
- prog1: prog1 {
+ prog1: prog at 1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
@@ -198,25 +202,25 @@
#address-cells = <1>;
#size-cells = <0>;
- uhpck: uhpck {
+ uhpck: uhpck at 6 {
#clock-cells = <0>;
reg = <6>;
clocks = <&usb>;
};
- udpck: udpck {
+ udpck: udpck at 7 {
#clock-cells = <0>;
reg = <7>;
clocks = <&usb>;
};
- pck0: pck0 {
+ pck0: pck0 at 8 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
- pck1: pck1 {
+ pck1: pck1 at 9 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
@@ -228,128 +232,132 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
+ u-boot,dm-pre-reloc;
- pioA_clk: pioA_clk {
+ pioA_clk: pioA_clk at 2 {
#clock-cells = <0>;
reg = <2>;
+ u-boot,dm-pre-reloc;
};
- pioB_clk: pioB_clk {
+ pioB_clk: pioB_clk at 3 {
#clock-cells = <0>;
reg = <3>;
+ u-boot,dm-pre-reloc;
};
- pioC_clk: pioC_clk {
+ pioC_clk: pioC_clk at 4 {
#clock-cells = <0>;
reg = <4>;
+ u-boot,dm-pre-reloc;
};
- adc_clk: adc_clk {
+ adc_clk: adc_clk at 5 {
#clock-cells = <0>;
reg = <5>;
};
- usart0_clk: usart0_clk {
+ usart0_clk: usart0_clk at 6 {
#clock-cells = <0>;
reg = <6>;
};
- usart1_clk: usart1_clk {
+ usart1_clk: usart1_clk at 7 {
#clock-cells = <0>;
reg = <7>;
};
- usart2_clk: usart2_clk {
+ usart2_clk: usart2_clk at 8 {
#clock-cells = <0>;
reg = <8>;
};
- mci0_clk: mci0_clk {
+ mci0_clk: mci0_clk at 9 {
#clock-cells = <0>;
reg = <9>;
};
- udc_clk: udc_clk {
+ udc_clk: udc_clk at 10 {
#clock-cells = <0>;
reg = <10>;
};
- twi0_clk: twi0_clk {
+ twi0_clk: twi0_clk at 11 {
reg = <11>;
#clock-cells = <0>;
};
- spi0_clk: spi0_clk {
+ spi0_clk: spi0_clk at 12 {
#clock-cells = <0>;
reg = <12>;
};
- spi1_clk: spi1_clk {
+ spi1_clk: spi1_clk at 13 {
#clock-cells = <0>;
reg = <13>;
};
- ssc0_clk: ssc0_clk {
+ ssc0_clk: ssc0_clk at 14 {
#clock-cells = <0>;
reg = <14>;
};
- tc0_clk: tc0_clk {
+ tc0_clk: tc0_clk at 17 {
#clock-cells = <0>;
reg = <17>;
};
- tc1_clk: tc1_clk {
+ tc1_clk: tc1_clk at 18 {
#clock-cells = <0>;
reg = <18>;
};
- tc2_clk: tc2_clk {
+ tc2_clk: tc2_clk at 19 {
#clock-cells = <0>;
reg = <19>;
};
- ohci_clk: ohci_clk {
+ ohci_clk: ohci_clk at 20 {
#clock-cells = <0>;
reg = <20>;
};
- macb0_clk: macb0_clk {
+ macb0_clk: macb0_clk at 21 {
#clock-cells = <0>;
reg = <21>;
};
- isi_clk: isi_clk {
+ isi_clk: isi_clk at 22 {
#clock-cells = <0>;
reg = <22>;
};
- usart3_clk: usart3_clk {
+ usart3_clk: usart3_clk at 23 {
#clock-cells = <0>;
reg = <23>;
};
- uart0_clk: uart0_clk {
+ uart0_clk: uart0_clk at 24 {
#clock-cells = <0>;
reg = <24>;
};
- uart1_clk: uart1_clk {
+ uart1_clk: uart1_clk at 25 {
#clock-cells = <0>;
reg = <25>;
};
- tc3_clk: tc3_clk {
+ tc3_clk: tc3_clk at 26 {
#clock-cells = <0>;
reg = <26>;
};
- tc4_clk: tc4_clk {
+ tc4_clk: tc4_clk at 27 {
#clock-cells = <0>;
reg = <27>;
};
- tc5_clk: tc5_clk {
+ tc5_clk: tc5_clk at 28 {
#clock-cells = <0>;
reg = <28>;
};
@@ -395,11 +403,51 @@
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
+ pioA: gpio at fffff400 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioA_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioB: gpio at fffff600 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioB_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ pioC: gpio at fffff800 {
+ compatible = "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioC_clk>;
+ u-boot,dm-pre-reloc;
+ };
+
pinctrl at fffff400 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x600>;
+ reg = <0xfffff400 0x200 /* pioA */
+ 0xfffff600 0x200 /* pioB */
+ 0xfffff800 0x200 /* pioC */
+ >;
atmel,mux-mask = <
/* A B */
@@ -407,9 +455,11 @@
0xffffffff 0x7fff3ccf /* pioB */
0xffffffff 0x007fffff /* pioC */
>;
+ u-boot,dm-pre-reloc;
/* shared pinctrl settings */
dbgu {
+ u-boot,dm-pre-reloc;
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */
@@ -719,39 +769,6 @@
atmel,pins = <AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
-
- pioA: gpio at fffff400 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff400 0x200>;
- interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pioA_clk>;
- };
-
- pioB: gpio at fffff600 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff600 0x200>;
- interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pioB_clk>;
- };
-
- pioC: gpio at fffff800 {
- compatible = "atmel,at91rm9200-gpio";
- reg = <0xfffff800 0x200>;
- interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupt-controller;
- #interrupt-cells = <2>;
- clocks = <&pioC_clk>;
- };
};
dbgu: serial at fffff200 {
diff --git a/arch/arm/dts/at91sam9260ek.dts b/arch/arm/dts/at91sam9260ek.dts
new file mode 100644
index 0000000000..086c8eae1c
--- /dev/null
+++ b/arch/arm/dts/at91sam9260ek.dts
@@ -0,0 +1,215 @@
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ * Copyright (C) 2016 Atmel,
+ * 2016 Nicolas Ferre <nicolas.ferre at atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel at91sam9260ek";
+ compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usb1: gadget at fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc0: mmc at fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+ slot at 1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usart0: serial at fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+ };
+
+ usart1: serial at fffb4000 {
+ status = "okay";
+ };
+
+ ssc0: ssc at fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
+
+ macb0: ethernet at fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ spi0: spi at fffc8000 {
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash at 0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
+
+ dbgu: serial at fffff200 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ pinctrl at fffff400 {
+ board {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+
+ shdwc at fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+
+ rtc at fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ watchdog at fffffd40 {
+ status = "okay";
+ };
+
+ gpbr: syscon at fffffd50 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci at 00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ btn3 {
+ label = "Button 3";
+ gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+ linux,code = <0x103>;
+ wakeup-source;
+ };
+
+ btn4 {
+ label = "Button 4";
+ gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ wakeup-source;
+ };
+ };
+
+ i2c-gpio-0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ 24c512 at 50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/dts/at91sam9g20.dtsi b/arch/arm/dts/at91sam9g20.dtsi
index f593016181..e88d73ca8b 100644
--- a/arch/arm/dts/at91sam9g20.dtsi
+++ b/arch/arm/dts/at91sam9g20.dtsi
@@ -40,7 +40,7 @@
};
pmc: pmc at fffffc00 {
- plla: pllack {
+ plla: pllack at 0 {
atmel,clk-input-range = <2000000 32000000>;
atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
<695000000 750000000 1 0>,
@@ -52,7 +52,7 @@
<400000000 450000000 3 1>;
};
- pllb: pllbck {
+ pllb: pllbck at 1 {
compatible = "atmel,at91sam9g20-clk-pllb";
atmel,clk-input-range = <2000000 32000000>;
atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
diff --git a/arch/arm/dts/at91sam9g20ek.dts b/arch/arm/dts/at91sam9g20ek.dts
new file mode 100644
index 0000000000..bbfd753112
--- /dev/null
+++ b/arch/arm/dts/at91sam9g20ek.dts
@@ -0,0 +1,29 @@
+/*
+ * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek";
+ compatible = "atmel,at91sam9g20ek", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/dts/at91sam9g20ek_2mmc.dts b/arch/arm/dts/at91sam9g20ek_2mmc.dts
new file mode 100644
index 0000000000..7ea83b6de8
--- /dev/null
+++ b/arch/arm/dts/at91sam9g20ek_2mmc.dts
@@ -0,0 +1,56 @@
+/*
+ * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+/dts-v1/;
+#include "at91sam9g20ek_common.dtsi"
+
+/ {
+ model = "Atmel at91sam9g20ek 2 mmc";
+ compatible = "atmel,at91sam9g20ek_2mmc", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ ahb {
+ apb{
+ mmc0: mmc at fffa8000 {
+ /* clk already mux wuth slot0 */
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot0_cmd_dat0
+ &pinctrl_mmc0_slot0_dat1_3>;
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ pinctrl at fffff400 {
+ mmc0_slot0 {
+ pinctrl_board_mmc0_slot0: mmc0_slot0-board {
+ atmel,pins =
+ <AT91_PIOC 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC2 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioB 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioB 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/arch/arm/dts/at91sam9g20ek_common.dtsi b/arch/arm/dts/at91sam9g20ek_common.dtsi
new file mode 100644
index 0000000000..65ae099119
--- /dev/null
+++ b/arch/arm/dts/at91sam9g20ek_common.dtsi
@@ -0,0 +1,227 @@
+/*
+ * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
+ *
+ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+#include "at91sam9g20.dtsi"
+
+/ {
+ chosen {
+ u-boot,dm-pre-reloc;
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ pinctrl at fffff400 {
+ board {
+ pinctrl_pck0_as_mck: pck0_as_mck {
+ atmel,pins =
+ <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PC1 periph B */
+ };
+
+ };
+
+ mmc0_slot1 {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC9 gpio CD pin pull up and deglitch */
+ };
+ };
+ };
+
+ dbgu: serial at fffff200 {
+ u-boot,dm-pre-reloc;
+ status = "okay";
+ };
+
+ usart0: serial at fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+ };
+
+ usart1: serial at fffb4000 {
+ status = "okay";
+ };
+
+ macb0: ethernet at fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ usb1: gadget at fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc0: mmc at fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+ slot at 1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ ssc0: ssc at fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
+
+ spi0: spi at fffc8000 {
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash at 0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
+
+ shdwc at fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+
+ rtc at fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ watchdog at fffffd40 {
+ status = "okay";
+ };
+
+ gpbr: syscon at fffffd50 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand at 40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap at 0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x20000>;
+ };
+
+ barebox at 20000 {
+ label = "barebox";
+ reg = <0x20000 0x40000>;
+ };
+
+ bareboxenv at 60000 {
+ label = "bareboxenv";
+ reg = <0x60000 0x20000>;
+ };
+
+ bareboxenv2 at 80000 {
+ label = "bareboxenv2";
+ reg = <0x80000 0x20000>;
+ };
+
+ oftree at 80000 {
+ label = "oftree";
+ reg = <0xa0000 0x20000>;
+ };
+
+ kernel at a0000 {
+ label = "kernel";
+ reg = <0xc0000 0x400000>;
+ };
+
+ rootfs at 4a0000 {
+ label = "rootfs";
+ reg = <0x4c0000 0x7800000>;
+ };
+
+ data at 7ca0000 {
+ label = "data";
+ reg = <0x7cc0000 0x8340000>;
+ };
+ };
+
+ usb0: ohci at 00500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+ };
+
+ i2c-gpio-0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ 24c512 at 50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+
+ wm8731: wm8731 at 1b {
+ compatible = "wm8731";
+ reg = <0x1b>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ btn3 {
+ label = "Button 3";
+ gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+ linux,code = <0x103>;
+ wakeup-source;
+ };
+
+ btn4 {
+ label = "Button 4";
+ gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ wakeup-source;
+ };
+ };
+
+ sound {
+ compatible = "atmel,at91sam9g20ek-wm8731-audio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pck0_as_mck>;
+
+ atmel,model = "wm8731 @ AT91SAMG20EK";
+
+ atmel,audio-routing =
+ "Ext Spk", "LHPOUT",
+ "Int Mic", "MICIN";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8731>;
+ };
+};
--
2.11.0
More information about the U-Boot
mailing list