[U-Boot] [PATCH v5] ls1043ardb: SPL size reduction

[York Sun]

On 03/29/2017 09:55 AM, Sumit Garg wrote:
> Using changes in this patch we were able to reduce approx 10k
> size of u-boot-spl.bin image. Following is breif description of
> changes to reduce SPL size:
> 1. Changes in board/freescale/ls1043ardb/Makefile to remove
>    compilation of eth.c and cpld.c in case of SPL build.
> 2. Changes in board/freescale/ls1043ardb/ls1043ardb.c to keep
>    only ddr_init and board_early_init_f funcations in case of SPL
>    build.
> 3. Changes in ls1043a_common.h & ls1043ardb.h to remove driver
>    specific macros due to which static data was being compiled in
>    case of SPL build.
> 4. Disable MMC driver from bieng compiled in case of SPL NAND
>    build and NAND driver from bieng compiled in case of SPL MMC build.
> 5. Remove I2C driver support from SPL in case of LS1043ARDB.
>
> Signed-off-by: Vinitha Pillai <vinitha.pillai at nxp.com>
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> ---
>
> Changes in v5:
> Move macros from rdb specfic header file to common header file.
>
> Changes in v4:
> Rename macros in header files.
>
> Changes in v3:
> Reorganised way to remove driver macros in ls1043a_common.h & ls1043ardb.h
> files for easy maintainability.
>
> Changes in v2:
> Rebased and fixed compilation warning on ls1043aqds.
>

Applied to u-boot-fsl-qoriq master, awaiting upstream. Thanks.

York