[U-Boot] [PATCH 3/3][v5] arm: ls1046ardb: Add SD secure boot target

[York Sun]

On 04/17/2017 12:32 AM, Ruchika Gupta wrote:
> - Add SD secure boot target for ls1046ardb.
> - Change the u-boot size defined by a macro for copying the main U-Boot by SPL
>   to also include the u-boot Secure Boot header size as header is appended to
>   u-boot image. So header will also be copied from SD to DDR.
> - CONFIG_MAX_SPL_SIZE is limited to 90K.SPL is copied to OCRAM (128K) where 32K
>   are reserved for use by boot ROM and 6K for the header
> - Reduce the size of CAAM driver for SPL Blobification functions and descriptors,
>   that are not required at the time of SPL are disabled. Further error code
>   conversion to strings is disabled for SPL build.
>
> Signed-off-by: Vinitha Pillai <vinitha.pillai at nxp.com>
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> Signed-off-by: Ruchika Gupta <ruchika.gupta at nxp.com>
> ---
> Changes in v5:
> Updated MAINTAINERS file
>
> Changes in v4:
> Removed spl_board_init from board specific file.
>
> Changes in v3:
> Resend
>
> Changes in v2:
> - Rebased patches to latest dependent patch set
> - With the dependent path set , spl imag size increased to 94K. So
> - additionally  reduce the spl image size by removing the functions from
> - CAAM driver that are not required in SPL flow
>

Reformatted commit message to wrap back at or before 70 characters. 
Please do the same on your future patches.

Applied to u-boot-fsl-qoriq master, awaiting upstream. Thanks.

York