[U-Boot] [PATCH] board/t1024rdb: enable board-level reset when issuing reset command

[York Sun]

On 04/10/2017 01:14 AM, Shengzhou Liu wrote:
> As board-specific reset logic, it needs to issue reset signal
> via CPLD when issuing 'reset' command in u-boot, this patch
> solves the issue of reset command not working on T1024RDB.
>
> Signed-off-by: Shengzhou Liu <Shengzhou.Liu at nxp.com>
> ---

Applied to u-boot-fsl-qoriq master, awaiting upstream. Thanks.

York