[U-Boot] [U-Boot PATCH V2 8/9] rockchip: config: enable rockusb support on rk3288 based board

[Lukasz Majewski]

Hi Eddie,

> all rk3288 based boards support rockusb, so enable it
> 
> Signed-off-by: Eddie Cai <eddie.cai.linux at gmail.com>
> ---
>  configs/evb-rk3288_defconfig      | 2 ++
>  configs/fennec-rk3288_defconfig   | 1 +
>  configs/firefly-rk3288_defconfig  | 1 +
>  configs/miqi-rk3288_defconfig     | 1 +
>  configs/popmetal-rk3288_defconfig | 1 +
>  configs/rock2_defconfig           | 2 ++
>  configs/sandbox_defconfig         | 1 +
>  configs/tinker-rk3288_defconfig   | 1 +
>  8 files changed, 10 insertions(+)
> 
> diff --git a/configs/evb-rk3288_defconfig
> b/configs/evb-rk3288_defconfig index aad2533..6be46fb 100644
> --- a/configs/evb-rk3288_defconfig
> +++ b/configs/evb-rk3288_defconfig
> @@ -17,6 +17,8 @@ CONFIG_CMD_MMC=y
>  CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/fennec-rk3288_defconfig
> b/configs/fennec-rk3288_defconfig index d1b0ffc..ba8a356 100644
> --- a/configs/fennec-rk3288_defconfig
> +++ b/configs/fennec-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/firefly-rk3288_defconfig
> b/configs/firefly-rk3288_defconfig index b0741d7..c860c06 100644
> --- a/configs/firefly-rk3288_defconfig
> +++ b/configs/firefly-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/miqi-rk3288_defconfig
> b/configs/miqi-rk3288_defconfig index 203824b..3c42d99 100644
> --- a/configs/miqi-rk3288_defconfig
> +++ b/configs/miqi-rk3288_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/popmetal-rk3288_defconfig
> b/configs/popmetal-rk3288_defconfig index dfc84b9..ddf6062 100644
> --- a/configs/popmetal-rk3288_defconfig
> +++ b/configs/popmetal-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/rock2_defconfig b/configs/rock2_defconfig
> index e9a32a9..365bc90 100644
> --- a/configs/rock2_defconfig
> +++ b/configs/rock2_defconfig
> @@ -16,6 +16,8 @@ CONFIG_CMD_MMC=y
>  CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y
> diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
> index 7f3f5ac..9350d51 100644
> --- a/configs/sandbox_defconfig
> +++ b/configs/sandbox_defconfig
> @@ -33,6 +33,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_REMOTEPROC=y
>  CONFIG_CMD_GPIO=y
>  CONFIG_CMD_TFTPPUT=y
> diff --git a/configs/tinker-rk3288_defconfig
> b/configs/tinker-rk3288_defconfig index cec3938..d96d7d3 100644
> --- a/configs/tinker-rk3288_defconfig
> +++ b/configs/tinker-rk3288_defconfig
> @@ -18,6 +18,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_SPI=y
>  CONFIG_CMD_I2C=y
>  CONFIG_CMD_USB=y
> +CONFIG_CMD_ROCKUSB=y
>  CONFIG_CMD_GPIO=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_CACHE=y

This patch would need to be adjusted if mentioned earlier changes are
applied.


Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de