[U-Boot] [PATCH v4 5/7] rockchip: pinctrl: rk3399: add support for the SPI5 controller

[Simon Glass]

On 20 April 2017 at 14:05, Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> This commit adds support for the pin-configuration of the SPI5
> controller of the RK3399 through the following changes:
>  * grf_rk3399.h: adds definition for configuring the SPI5 pins
>                  in the GPIO2C group
>  * periph.h: defines PERIPH_ID_SPI3 through PERIPH_ID_SPI5
>  * pinctrl_rk3399.c: adds the reverse-mapping from the IRQ# to
>                      PERIPH_ID_SPI5; dispatches PERIPH_ID_SPI3
>                      through SPI5 to the appropriate pin-config
>                      function; implements the pin-configuration
>                      for PERIPH_ID_SPI5 using the GPIO2C group
>
> X-AffectedPlatforms: RK3399-Q7
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>
> Acked-by: Simon Glass <sjg at chromium.org>
> ---
>
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
>  arch/arm/include/asm/arch-rockchip/grf_rk3399.h | 12 ++++++++++++
>  arch/arm/include/asm/arch-rockchip/periph.h     |  3 +++
>  drivers/pinctrl/rockchip/pinctrl_rk3399.c       | 17 +++++++++++++++++
>  3 files changed, 32 insertions(+)
>

Applied to u-boot-rockchip/next, thanks!