[U-Boot] [ANN] U-Boot v2017.05-rc2 released

[Simon Glass]

Hi Andreas,

On 20 April 2017 at 18:47, Andreas Färber <afaerber at suse.de> wrote:
> Am 21.04.2017 um 02:34 schrieb Andreas Färber:
>> Hi Simon,
>>
>> Am 21.04.2017 um 01:44 schrieb Simon Glass:
>>> On 20 April 2017 at 17:23, Andreas Färber <afaerber at suse.de> wrote:
>>>> Using -rc2 with firefly-rk3288 defconfig I can only boot into SPL but
>>>> not into full U-Boot. I am using the old documented way of dd'ing to
>>>> sector 256 on SD (doc/README.rockchip).
>>>>
>>>> Looking at include/configs/rk3288_common.h I also tried putting
>>>> u-boot.img on a FAT partition, to no effect.
>>>>
>>>> v2017.03 doesn't even show SPL working.
>>>> v2017.01 worked okay.
>>>>
>>>> Build log for -rc2:
>>>> https://build.opensuse.org/build/Base:System:Staging/openSUSE_Factory_ARM/armv7l/u-boot-firefly-rk3288/_log
>>>
>>> Can you try removing RETURN_TO_BROM (or imilsar) and adding
>>> CONFIG_SPL_OF_PLATDATA?
>>
>> As an interim update I can share that latest master behaves slightly
>> differently:
>>
>> U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:29:48)
>> Returning to boot ROM...
>>
>> compared to:
>>
>> U-Boot SPL 2017.05-rc2 (Apr 20 2017 - 14:33:20)
>
> Disabling the ROCKCHIP_SPL_BACK_TO_BROM option I get:
>
> U-Boot SPL 2017.05-rc2-00053-g3c476d8 (Apr 21 2017 - 02:38:52)
> SPL: Unsupported Boot Device!
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
>
> If I additionally enable SPL_OF_PLATDATA then I am back to the v2017.03
> state of no serial output.

I just tested mainline with those two changes and it works for me. I
pushed my patch to u-boot-rockchip/firefly-working. Can you try again?

Regards,
Simon

>
> Regards,
> Andreas
>
> --
> SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
> GF: Felix Imendörffer, Jane Smithard, Graham Norton
> HRB 21284 (AG Nürnberg)