[U-Boot] [PATCH 5/7] rockchip: rk3368: Add initial support for RK3368 based GeekBox

Andreas Färber afaerber at suse.de
Fri Apr 21 02:59:11 UTC 2017


Hi Andy,

Sorry for forgetting about this, and thank you for picking it up.

Am 21.04.2017 um 04:32 schrieb Andy Yan:
> From: Andreas Färber <afaerber at suse.de>
> 
> The GeekBox is a TV box from GeekBuying, based on an MXM3 module.
> The module can be used with base boards such as the GeekBox Landingship.
> 
> This adds basic support to chain-load U-Boot from Rockchip's miniloader.
> 
> $ ./lollipop_u-boot/tools/loaderimage --pack u-boot.bin u-boot.img
> 
> Implemented is the serial console, but no boot media drivers yet.
> 
> Note that flashing the resulting U-Boot will not allow you to enter the
> rockusb mode any more via "Update" button. Instead, you will need to
> short two pins on the bottom of the module to enter MaskRom mode and
> re-flash the loader:

":"? See also below.

> 
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> Signed-off-by: Andy Yan <andy.yan at rock-chips.com>
> ---
> 
>  arch/arm/dts/Makefile                 |   2 +
>  arch/arm/dts/rk3368-geekbox.dts       | 319 ++++++++++++++++++++++++++++++++++
>  arch/arm/mach-rockchip/rk3368/Kconfig |  11 ++
>  board/geekbuying/geekbox/Kconfig      |  15 ++
>  board/geekbuying/geekbox/MAINTAINERS  |   6 +
>  board/geekbuying/geekbox/Makefile     |   7 +
>  board/geekbuying/geekbox/geekbox.c    |  28 +++
>  configs/geekbox_defconfig             |  21 +++
>  include/configs/geekbox.h             |  18 ++
>  9 files changed, 427 insertions(+)
>  create mode 100644 arch/arm/dts/rk3368-geekbox.dts
>  create mode 100644 board/geekbuying/geekbox/Kconfig
>  create mode 100644 board/geekbuying/geekbox/MAINTAINERS
>  create mode 100644 board/geekbuying/geekbox/Makefile
>  create mode 100644 board/geekbuying/geekbox/geekbox.c
>  create mode 100644 configs/geekbox_defconfig
>  create mode 100644 include/configs/geekbox.h

One reason this series stalled is that I was asked to add a README
instead of the text in the commit message - this is still missing in
your submission, it seems.

> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index ce34e3e..fbc97e8 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -41,8 +41,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
>  	rk3288-veyron-mickey.dtb \
>  	rk3288-veyron-minnie.dtb \
>  	rk3328-evb.dtb \
> +	rk3368-geekbox.dtb \
>  	rk3399-evb.dtb \
>  	rk3399-puma.dtb
> +	rk3368-geekbox.dtb

Mismerge.

>  dtb-$(CONFIG_ARCH_MESON) += \
>  	meson-gxbb-odroidc2.dtb
[snip]

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)


More information about the U-Boot mailing list