[U-Boot] [PATCH v3 0/6] sunxi: video: Add support for HDMI output on A64/H3/H5

[Jernej Škrabec]

Hi Maxime,

Dne ponedeljek, 24. april 2017 ob 09:19:40 CEST je Maxime Ripard napisal(a):
> Hi Jernej,
> 
> On Fri, Apr 21, 2017 at 07:24:12PM +0200, Jernej Škrabec wrote:
> > Dne petek, 21. april 2017 ob 09:04:13 CEST je Maxime Ripard napisal(a):
> > > Hi Jernej,
> > > 
> > > On Mon, Mar 27, 2017 at 07:22:28PM +0200, Jernej Skrabec wrote:
> > > > This series implements support for HDMI output. This is done using
> > > > DM video framework and sharing the HDMI controller code with RK3288.
> > > > 
> > > > Patch 1 splits out TCON code which is completely reusable on
> > > > all Allwinner SoCs.
> > > > 
> > > > Patch 2 converts common TCON code to use DM video compatible timing
> > > > structure.
> > > > 
> > > > Patch 3 adds all necessary clocks which are needed for Display
> > > > Engine 2, TCON and HDMI.
> > > 
> > > I merged all these patches...
> > > 
> > > > Patch 4 implement actual DE2 and HDMI driver and patch 5 disables HDMI
> > > > on all boards which don't have it (default is on).
> > > 
> > > But not this one, since it creates a Kconfig warning due to the
> > > dependency of I2C_EDID on DM_I2C.
> > > 
> > > I think the current state of this discussion is that the i2c driver
> > > should be converted to the DM, which seems to be stalled at the
> > > moment.
> > > 
> > > Could you take in that patch and do the minor rework that were
> > > suggested by Simon so that we can get this in ?

Sorry I missed what was suggested by Simon?

> > 
> > Yes, of course. Should I also simplify the driver, because since then I
> > learned a bit more about DE2? Or should I sent follow up patch?
> 
> Which driver are you talking about? DE's or the i2c driver?

DE

> 
> If it is something that was already merged, it's better if you send
> follow up patches. If it's a patch that is still pending, then you can
> do it in that patch and resend a new version.

Ok, I will send a new version.

Regards,
Jernej