[U-Boot] [v2, 09/13] fix: phy: marvell: cp110: fix comphy lane 4 selection options

[igall at marvell.com]

From: Stefan Roese <sr at denx.de>

The comphy configuration is incorrect.
Set the correct values for SGMII.

In addition, remove xaui from the comment as it is not supported.

Signed-off-by: Yoav Gvili <ygvili at marvell.com>
Signed-off-by: Stefan Roese <sr at denx.de>
Signed-off-by: Igal Liberman <igall at marvell.com>
---
 drivers/phy/marvell/comphy_cp110.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index 056de83..8ea5df2 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -34,7 +34,7 @@ struct utmi_phy_data {
  * PIPE selector include USB and PCIe options.
  * PHY selector include the Ethernet and SATA options, every Ethernet
  * option has different options, for example: serdes lane2 had option
- * Eth_port_0 that include (SGMII0, XAUI0, RXAUI0, SFI)
+ * Eth_port_0 that include (SGMII0, RXAUI0, SFI)
  */
 struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
 	{4, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII1, 0x1}, /* Lane 0 */
@@ -46,9 +46,9 @@ struct comphy_mux_data cp110_comphy_phy_mux_data[] = {
 	     {PHY_TYPE_SATA0, 0x4} } },
 	{8, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_RXAUI1, 0x1}, /* Lane 3 */
 	     {PHY_TYPE_SGMII1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
-	{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 4 */
+	{7, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII0, 0x2}, /* Lane 4 */
 	     {PHY_TYPE_RXAUI0, 0x2}, {PHY_TYPE_SFI, 0x2},
-	     {PHY_TYPE_SGMII1, 0x2} } },
+	     {PHY_TYPE_SGMII1, 0x1} } },
 	{6, {{PHY_TYPE_UNCONNECTED, 0x0}, {PHY_TYPE_SGMII2, 0x1}, /* Lane 5 */
 	     {PHY_TYPE_RXAUI1, 0x2}, {PHY_TYPE_SATA1, 0x4} } },
 };
-- 
2.7.4