[U-Boot] [v2, 13/13] fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETP
igall at marvell.com
igall at marvell.com
Mon Apr 24 15:45:33 UTC 2017
From: Igal Liberman <igall at marvell.com>
Add PCIE analog parameters initialization values according to
latest ETP.
Signed-off-by: Igal Liberman <igall at marvell.com>
---
drivers/phy/marvell/comphy_cp110.c | 66 ++++++++++++++++++++++++++++++++++++--
drivers/phy/marvell/comphy_hpipe.h | 44 ++++++++++++++++++++++++-
2 files changed, 106 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c
index df60571..3ac405a 100644
--- a/drivers/phy/marvell/comphy_cp110.c
+++ b/drivers/phy/marvell/comphy_cp110.c
@@ -232,6 +232,8 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
mask |= HPIPE_MISC_REFCLK_SEL_MASK;
data |= 0x1 << HPIPE_MISC_REFCLK_SEL_OFFSET;
}
+ mask |= HPIPE_MISC_ICP_FORCE_MASK;
+ data |= 0x1 << HPIPE_MISC_ICP_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_MISC_REG, data, mask);
if (pcie_clk) { /* output */
/* Set reference frequcency select - 0x2 for 25MHz*/
@@ -267,6 +269,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
/* Set Maximal PHY Generation Setting(8Gbps) */
mask = HPIPE_INTERFACE_GEN_MAX_MASK;
data = 0x2 << HPIPE_INTERFACE_GEN_MAX_OFFSET;
+ /* Bypass frame detection and sync detection for RX DATA */
+ mask = HPIPE_INTERFACE_DET_BYPASS_MASK;
+ data = 0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET;
/* Set Link Train Mode (Tx training control pins are used) */
mask |= HPIPE_INTERFACE_LINK_TRAIN_MASK;
data |= 0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET;
@@ -351,9 +356,9 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
data = 0x3 << HPIPE_G3_DFE_RES_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SETTING_4_REG, data, mask);
- /* Force DFE resolution (use GEN table value) */
+ /* Use TX/RX training result for DFE */
mask = HPIPE_DFE_RES_FORCE_MASK;
- data = 0x1 << HPIPE_DFE_RES_FORCE_OFFSET;
+ data = 0x0 << HPIPE_DFE_RES_FORCE_OFFSET;
reg_set(hpipe_addr + HPIPE_DFE_REG0, data, mask);
/* Configure initial and final coefficient value for receiver */
@@ -379,9 +384,64 @@ static int comphy_pcie_power_up(u32 lane, u32 pcie_width, bool clk_src,
data = 0x1 << HPIPE_G3_FFE_DEG_RES_LEVEL_OFFSET;
mask |= HPIPE_G3_FFE_LOAD_RES_LEVEL_MASK;
- data |= 0x1 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
+ data |= 0x3 << HPIPE_G3_FFE_LOAD_RES_LEVEL_OFFSET;
reg_set(hpipe_addr + HPIPE_G3_SETTING_3_REG, data, mask);
+ /* Pattern lock lost timeout disable */
+ mask = HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_MASK;
+ data = 0x0 << HPIPE_PATTERN_LOCK_LOST_TIMEOUT_EN_OFFSET;
+ reg_set(hpipe_addr + HPIPE_FRAME_DETECT_CTRL_3_REG, data, mask);
+
+ /* Configure DFE adaptations */
+ mask = HPIPE_CDR_MAX_DFE_ADAPT_1_MASK;
+ data = 0x1 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET;
+ mask |= HPIPE_CDR_MAX_DFE_ADAPT_0_MASK;
+ data |= 0x0 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET;
+ mask |= HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK;
+ data |= 0x0 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET;
+ reg_set(hpipe_addr + HPIPE_CDR_CONTROL_REG, data, mask);
+ mask = HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK;
+ data = 0x0 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET;
+ reg_set(hpipe_addr + HPIPE_DFE_CONTROL_REG, data, mask);
+
+ /* Genration 2 setting 1*/
+ mask = HPIPE_G2_SET_1_G2_RX_SELMUPI_MASK;
+ data = 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUPI_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUPP_MASK;
+ data |= 0x1 << HPIPE_G2_SET_1_G2_RX_SELMUPP_OFFSET;
+ mask |= HPIPE_G2_SET_1_G2_RX_SELMUFI_MASK;
+ data |= 0x0 << HPIPE_G2_SET_1_G2_RX_SELMUFI_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SET_1_REG, data, mask);
+
+ /* DFE enable */
+ mask = HPIPE_G2_DFE_RES_MASK;
+ data = 0x3 << HPIPE_G2_DFE_RES_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G2_SETTINGS_4_REG, data, mask);
+
+ /* Configure DFE Resolution */
+ mask = HPIPE_LANE_CFG4_DFE_EN_SEL_MASK;
+ data = 0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_LANE_CFG4_REG, data, mask);
+
+ /* VDD calibration control */
+ mask = HPIPE_EXT_SELLV_RXSAMPL_MASK;
+ data = 0x16 << HPIPE_EXT_SELLV_RXSAMPL_OFFSET;
+ reg_set(hpipe_addr + HPIPE_VDD_CAL_CTRL_REG, data, mask);
+
+ /* Set PLL Charge-pump Current Control */
+ mask = HPIPE_G3_SETTING_5_G3_ICP_MASK;
+ data = 0x4 << HPIPE_G3_SETTING_5_G3_ICP_OFFSET;
+ reg_set(hpipe_addr + HPIPE_G3_SETTING_5_REG, data, mask);
+
+ /* Set lane rqualization remote setting */
+ mask = HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK;
+ data = 0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET;
+ mask |= HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK;
+ data |= 0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET;
+ mask |= HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK;
+ data |= 0x2 << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET;
+ reg_set(hpipe_addr + HPIPE_LANE_EQ_REMOTE_SETTING_REG, data, mask);
+
if (!is_end_point) {
/* Set phy in root complex mode */
mask = HPIPE_CFG_PHY_RC_EP_MASK;
diff --git a/drivers/phy/marvell/comphy_hpipe.h b/drivers/phy/marvell/comphy_hpipe.h
index 5edd0ad..fbceb2a 100644
--- a/drivers/phy/marvell/comphy_hpipe.h
+++ b/drivers/phy/marvell/comphy_hpipe.h
@@ -227,6 +227,9 @@
#define HPIPE_INTERFACE_GEN_MAX_OFFSET 10
#define HPIPE_INTERFACE_GEN_MAX_MASK \
(0x3 << HPIPE_INTERFACE_GEN_MAX_OFFSET)
+#define HPIPE_INTERFACE_DET_BYPASS_OFFSET 12
+#define HPIPE_INTERFACE_DET_BYPASS_MASK \
+ (0x1 << HPIPE_INTERFACE_DET_BYPASS_OFFSET)
#define HPIPE_INTERFACE_LINK_TRAIN_OFFSET 14
#define HPIPE_INTERFACE_LINK_TRAIN_MASK \
(0x1 << HPIPE_INTERFACE_LINK_TRAIN_OFFSET)
@@ -444,6 +447,17 @@
#define HPIPE_TX_TRAIN_PAT_SEL_MASK \
(0x1 << HPIPE_TX_TRAIN_PAT_SEL_OFFSET)
+#define HPIPE_CDR_CONTROL_REG 0x418
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET 12
+#define HPIPE_CDR_RX_MAX_DFE_ADAPT_1_MASK \
+ (0x3 << HPIPE_CDR_RX_MAX_DFE_ADAPT_1_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET 9
+#define HPIPE_CDR_MAX_DFE_ADAPT_0_MASK \
+ (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_0_OFFSET)
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET 6
+#define HPIPE_CDR_MAX_DFE_ADAPT_1_MASK \
+ (0x7 << HPIPE_CDR_MAX_DFE_ADAPT_1_OFFSET)
+
#define HPIPE_TX_TRAIN_CTRL_11_REG 0x438
#define HPIPE_TX_STATUS_CHECK_MODE_OFFSET 6
#define HPIPE_TX_TX_STATUS_CHECK_MODE_MASK \
@@ -481,7 +495,11 @@
(0x3 << HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET)
#define HPIPE_G2_SETTINGS_3_REG 0x448
-#define HPIPE_G2_SETTINGS_4_REG 0x44C
+
+#define HPIPE_G2_SETTINGS_4_REG 0x44c
+#define HPIPE_G2_DFE_RES_OFFSET 8
+#define HPIPE_G2_DFE_RES_MASK \
+ (0x3 << HPIPE_G2_DFE_RES_OFFSET)
#define HPIPE_G3_SETTING_3_REG 0x450
#define HPIPE_G3_FFE_CAP_SEL_OFFSET 0
@@ -510,6 +528,11 @@
#define HPIPE_TX_PRESET_INDEX_MASK \
(0xf << HPIPE_TX_PRESET_INDEX_OFFSET)
+#define HPIPE_DFE_CONTROL_REG 0x470
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET 14
+#define HPIPE_DFE_TX_MAX_DFE_ADAPT_MASK \
+ (0x3 << HPIPE_DFE_TX_MAX_DFE_ADAPT_OFFSET)
+
#define HPIPE_DFE_CTRL_28_REG 0x49C
#define HPIPE_DFE_CTRL_28_PIPE4_OFFSET 7
#define HPIPE_DFE_CTRL_28_PIPE4_MASK \
@@ -520,6 +543,11 @@
#define HPIPE_G1_SETTING_5_G1_ICP_MASK \
(0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
+#define HPIPE_G3_SETTING_5_REG 0x548
+#define HPIPE_G3_SETTING_5_G3_ICP_OFFSET 0
+#define HPIPE_G3_SETTING_5_G3_ICP_MASK \
+ (0xf << HPIPE_G3_SETTING_5_G3_ICP_OFFSET)
+
#define HPIPE_LANE_CONFIG0_REG 0x600
#define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET 0
#define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK \
@@ -542,6 +570,9 @@
#define HPIPE_LANE_CFG4_DFE_CTRL_OFFSET 0
#define HPIPE_LANE_CFG4_DFE_CTRL_MASK \
(0x7 << HPIPE_LANE_CFG4_DFE_CTRL_OFFSET)
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET 3
+#define HPIPE_LANE_CFG4_DFE_EN_SEL_MASK \
+ (0x1 << HPIPE_LANE_CFG4_DFE_EN_SEL_OFFSET)
#define HPIPE_LANE_CFG4_DFE_OVER_OFFSET 6
#define HPIPE_LANE_CFG4_DFE_OVER_MASK \
(0x1 << HPIPE_LANE_CFG4_DFE_OVER_OFFSET)
@@ -559,6 +590,17 @@
#define HPIPE_CFG_UPDATE_POLARITY_MASK \
(0x1 << HPIPE_CFG_UPDATE_POLARITY_OFFSET)
+#define HPIPE_LANE_EQ_REMOTE_SETTING_REG 0x6f8
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET 0
+#define HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_MASK \
+ (0x1 << HPIPE_LANE_CFG_FOM_DIRN_OVERRIDE_OFFSET)
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET 1
+#define HPIPE_LANE_CFG_FOM_ONLY_MODE_MASK \
+ (0x1 << HPIPE_LANE_CFG_FOM_ONLY_MODE_OFFFSET)
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET 2
+#define HPIPE_LANE_CFG_FOM_PRESET_VECTOR_MASK \
+ (0xf << HPIPE_LANE_CFG_FOM_PRESET_VECTOR_OFFSET)
+
#define HPIPE_RST_CLK_CTRL_REG 0x704
#define HPIPE_RST_CLK_CTRL_PIPE_RST_OFFSET 0
#define HPIPE_RST_CLK_CTRL_PIPE_RST_MASK \
--
2.7.4
More information about the U-Boot
mailing list