[U-Boot] [PATCH 0/4] MIPS: call debug_uart_init right before board_init_f

[Daniel Schwierzeck]

2017-04-25 17:48 GMT+02:00 Álvaro Fernández Rojas <noltari at gmail.com>:
> I've just realized I sent this without v2 prefix.
> Should I resend it?

no, I've found the right patches in patchwork ;)

>
> El 24/04/2017 a las 19:03, Álvaro Fernández Rojas escribió:
>> All MIPS boards that support debug uart are calling debug_uart_init right at
>> the beginning of board_early_init_f.
>> Instead of doing that, let's provide a generic call to debug_uart_init right
>> before the call to board_init_f if debug uart is enabled.
>>
>> v2: Introduce the changes suggested by Daniel Schwierzeck:
>>  - Call debug_uart_init before low level init for boards with stack in SRAM.
>>
>> Daniel Schwierzeck (1):
>>   MIPS: call debug_uart_init right before board_init_f
>>
>> Álvaro Fernández Rojas (3):
>>   MIPS: QCA AP121: remove debug_uart_init call
>>   MIPS: QCA AP143: remove debug_uart_init call
>>   MIPS: tl-wdr4300: remove debug_uart_init call
>>
>>  arch/mips/cpu/start.S          | 14 ++++++++++++++
>>  board/qca/ap121/ap121.c        |  3 ---
>>  board/qca/ap143/ap143.c        |  3 ---
>>  board/tplink/wdr4300/wdr4300.c | 18 ++++++++++++++----
>>  4 files changed, 28 insertions(+), 10 deletions(-)
>>



-- 
- Daniel