[U-Boot] [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support

[york sun]

> -----Original Message-----
> From: Priyanka Jain
> Sent: Tuesday, April 25, 2017 9:36 PM
> To: york sun <york.sun at nxp.com>; u-boot at lists.denx.de
> Cc: Suresh Gupta <suresh.gupta at nxp.com>
> Subject: RE: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support
> 
> 
> 
> > -----Original Message-----
> > From: York Sun [mailto:york.sun at nxp.com]
> > Sent: Tuesday, April 25, 2017 9:34 PM
> > To: Priyanka Jain <priyanka.jain at nxp.com>; u-boot at lists.denx.de
> > Cc: Suresh Gupta <suresh.gupta at nxp.com>
> > Subject: Re: [PATCH 2/2][v4] nxp/ls2080ardb: Add QSPI-boot support
> >
> > On 04/25/2017 03:18 AM, Priyanka Jain wrote:
> > > QSPI-boot is verified on LS20080ARDB RevF board
> >
> > Typo here. It is LS2080ARDB.
> >
> > > with LS2088A SoC.
> > > LS2088ARDB RevF Board has limitation that QIXIS
> >
> > Is the board marked as LS2088ARDB? Is the limitation on rev F board, or the
> > boot method?
> >
> Board is marked as LS2088ARDB.
> Shall I change defconfig name to ls2088ardb_qspi_defconfig?
> Also  for NOR boot on LS2088ARDB, currently we are using
> ls2080ardb_defconfig.
> Shall I create a copy of ls2080ardb_defconfig as l2088ardb_defconfi or make
> no change for that?

Do not duplicate defconfig, it will increase the test time.
If you believe LS2088ARDB is the only board using QSPI, you can use ls2088ardb_qspi_defconfig.

York