[U-Boot] [PATCH 10/11] board: ls2080a: Initialize eth before mcinitcmd

[Bogdan Purcareata]

The mcinitcmd usually boots the MC, and also patches the DPC with u-boot
environment MAC addresses for the MAC phy interfaces. In order for this
to work, the board phy interfaces must be initialized before this point.

Signed-off-by: Bogdan Purcareata <bogdan.purcareata at nxp.com>
---
 board/freescale/ls2080aqds/eth.c           | 2 +-
 board/freescale/ls2080ardb/eth_ls2080rdb.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c
index 59361e9..d051dd8 100644
--- a/board/freescale/ls2080aqds/eth.c
+++ b/board/freescale/ls2080aqds/eth.c
@@ -902,10 +902,10 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
+	error = cpu_eth_init(bis);
 	mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
 	if (mc_boot_env_var)
 		run_command_list(mc_boot_env_var, -1, 0);
-	error = cpu_eth_init(bis);
 
 	if (hwconfig_f("xqsgmii", env_hwconfig)) {
 		if (serdes1_prtcl == 0x7)
diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c
index 799799c..5f5c304 100644
--- a/board/freescale/ls2080ardb/eth_ls2080rdb.c
+++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c
@@ -91,10 +91,10 @@ int board_eth_init(bd_t *bis)
 		}
 	}
 
+	cpu_eth_init(bis);
 	mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
 	if (mc_boot_env_var)
 		run_command_list(mc_boot_env_var, -1, 0);
-	cpu_eth_init(bis);
 #endif /* CONFIG_FMAN_ENET */
 
 #ifdef CONFIG_PHY_AQUANTIA
-- 
1.9.1