[U-Boot] [PATCH v2 2/2] ARM: sunxi: use imply instead of bare default y in Kconfig

[Masahiro Yamada]

Fix annoying config redefines in SoC/board level Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

Changes in v2: None

 arch/arm/Kconfig            |  8 ++++++++
 arch/arm/mach-sunxi/Kconfig | 26 --------------------------
 2 files changed, 8 insertions(+), 26 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 07fd1e0..3adafd6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -822,6 +822,14 @@ config ARCH_SUNXI
 	select USB_STORAGE if DISTRO_DEFAULTS
 	select USB_KEYBOARD if DISTRO_DEFAULTS
 	select USE_TINY_PRINTF
+	imply PRE_CONSOLE_BUFFER
+	imply SPL_GPIO_SUPPORT
+	imply SPL_LIBCOMMON_SUPPORT
+	imply SPL_LIBDISK_SUPPORT
+	imply SPL_LIBGENERIC_SUPPORT
+	imply SPL_MMC_SUPPORT if GENERIC_MMC
+	imply SPL_POWER_SUPPORT
+	imply SPL_SERIAL_SUPPORT
 
 config TARGET_TS4600
 	bool "Support TS4600"
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index ac3be30..8d9900e 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -3,32 +3,6 @@ if ARCH_SUNXI
 config IDENT_STRING
 	default " Allwinner Technology"
 
-# FIXME: Should not redefine these Kconfig symbols
-config PRE_CONSOLE_BUFFER
-	default y
-
-config SPL_GPIO_SUPPORT
-	default y
-
-config SPL_LIBCOMMON_SUPPORT
-	default y
-
-config SPL_LIBDISK_SUPPORT
-	default y
-
-config SPL_LIBGENERIC_SUPPORT
-	default y
-
-config SPL_MMC_SUPPORT
-	depends on SPL && GENERIC_MMC
-	default y
-
-config SPL_POWER_SUPPORT
-	default y
-
-config SPL_SERIAL_SUPPORT
-	default y
-
 config SUNXI_HIGH_SRAM
 	bool
 	default n
-- 
2.7.4