[U-Boot] [PATCH 1/5] rockchip: clk: rk3399: allow requests for HDMI clocks

[Philipp Tomsich]

This allows requests (via the DTS) for PCLK_HDMI_CTRL/PCLK_VIO_GRF,
which are clock gates in the HDMI output path for the RK3399.

As these are enabled by default (i.e. after reset), we don't implement
any logic to actively open/close these clock gates and simply assume
that their reset-default has not been changed.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

 drivers/clk/rockchip/clk_rk3399.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c
index 72395e2..d820ea6 100644
--- a/drivers/clk/rockchip/clk_rk3399.c
+++ b/drivers/clk/rockchip/clk_rk3399.c
@@ -879,6 +879,9 @@ static ulong rk3399_clk_get_rate(struct clk *clk)
 	case SCLK_UART0:
 	case SCLK_UART2:
 		return 24000000;
+		break;
+	case PCLK_HDMI_CTRL:
+		break;
 	case DCLK_VOP0:
 	case DCLK_VOP1:
 		break;
@@ -916,6 +919,10 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate)
 	case SCLK_SPI0...SCLK_SPI5:
 		ret = rk3399_spi_set_clk(priv->cru, clk->id, rate);
 		break;
+	case PCLK_HDMI_CTRL:
+	case PCLK_VIO_GRF:
+		/* the PCLK gates for video are enabled by default */
+		break;
 	case DCLK_VOP0:
 	case DCLK_VOP1:
 		ret = rk3399_vop_set_clk(priv->cru, clk->id, rate);
-- 
1.9.1