[U-Boot] [PATCH v3 65/66] rockchip: board: puma-rk3399: fix warnings in puma_rk3399/fit_spl_atf.its

Dr. Philipp Tomsich philipp.tomsich at theobroma-systems.com
Wed Aug 2 09:09:13 UTC 2017


Kever,

We use a fork of the ATF repository and have the M3 firmware completely factored out and have changed parts of the SRAM setup.
In other words: there will be two separate .bin files created that need to be loaded to two separate locations.
Please refer to our board’s README for the steps to get it set up and booted.

Note that there will be a structural update to our ATF in the next couple of weeks that is expected to change things around quite a bit.

Regards,
Philipp.

> On 02 Aug 2017, at 05:10, Kever Yang <kever.yang at rock-chips.com> wrote:
> 
> Hi Philipp,
> 
>    rk3399 atf has 3 parts, sram.data, sram.text, pmu_fw for m0, and now the ATF project output
> 
> with all 3 section in one bl31.elf, I use to abstract them into 3 separate bin file and package them
> 
> with fit.
> 
>    Could you share some more detail about how you use the ATF in puma-rk3399? You only have
> 
> two section in its description. How many steps do you need for rk3399 to get uboot, atf and the image
> 
> can be flash to eMMC?
> 
> Thanks,
> - Kever
> On 07/29/2017 03:22 AM, Philipp Tomsich wrote:
>> The ITS file generated warnings due to @<num> designations in the naming
>> which cause DTC to complain as follows:
>>   Warning (unit_address_vs_reg): Node /images/uboot at 1 has a unit name, but no reg property
>>   Warning (unit_address_vs_reg): Node /images/atf at 1 has a unit name, but no reg property
>>   Warning (unit_address_vs_reg): Node /images/pmu at 1 has a unit name, but no reg property
>>   Warning (unit_address_vs_reg): Node /images/fdt at 1 has a unit name, but no reg property
>>   Warning (unit_address_vs_reg): Node /configurations/conf at 1 has a unit name, but no reg property
>> 
>> This removes the @<num> part from the names, as we only have a single
>> image for each payload aspect (and only a single configuration) anyway.
>> 
>> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>> 
>> Reviewed-by: Simon Glass <sjg at chromium.org>
>> ---
>> 
>> Changes in v3: None
>> Changes in v2: None
>> 
>>  board/theobroma-systems/puma_rk3399/fit_spl_atf.its | 18 +++++++++---------
>>  1 file changed, 9 insertions(+), 9 deletions(-)
>> 
>> diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
>> index f93c251..0519fad 100644
>> --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
>> +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
>> @@ -13,7 +13,7 @@
>>  	#address-cells = <1>;
>>    	images {
>> -		uboot at 1 {
>> +		uboot {
>>  			description = "U-Boot (64-bit)";
>>  			data = /incbin/("../../../u-boot-nodtb.bin");
>>  			type = "standalone";
>> @@ -21,7 +21,7 @@
>>  			compression = "none";
>>  			load = <0x00200000>;
>>  		};
>> -		atf at 1 {
>> +		atf {
>>  			description = "ARM Trusted Firmware";
>>  			data = /incbin/("../../../bl31.bin");
>>  			type = "firmware";
>> @@ -30,14 +30,14 @@
>>  			load = <0x00001000>;
>>  			entry = <0x00001000>;
>>  		};
>> -		pmu at 1 {
>> +		pmu {
>>  		        description = "Cortex-M0 firmware";
>>  			data = /incbin/("../../../rk3399m0.bin");
>>  			type = "pmu-firmware";
>>  			compression = "none";
>>  			load = <0xff8c0000>;
>>                  };
>> -		fdt at 1 {
>> +		fdt {
>>  			description = "RK3399-Q7 (Puma) flat device-tree";
>>  			data = /incbin/("../../../u-boot.dtb");
>>  			type = "flat_dt";
>> @@ -46,12 +46,12 @@
>>  	};
>>    	configurations {
>> -		default = "conf at 1";
>> -		conf at 1 {
>> +		default = "conf";
>> +		conf {
>>  			description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
>> -			firmware = "uboot at 1";
>> -			loadables = "atf at 1";
>> -			fdt = "fdt at 1";
>> +			firmware = "uboot";
>> +			loadables = "atf";
>> +			fdt = "fdt";
>>  		};
>>  	};
>>  };
> 
> 



More information about the U-Boot mailing list