[U-Boot] [PATCH v4 03/66] rockchip: back-to-bootrom: add 'back-to-bootrom' support for AArch64

[Philipp Tomsich]

The back-to-bootrom support for Rockchip is equivalent to an
(assembly) implementation of setjmp/longjmp (i.e. it saves the
stack-pointer, link-register and callee-saved registers). Up until
now, this had only been implemented for AArch32 (i.e. ARMv7 or older),
which puts the new ARMv8 devices (which boot in AArch64 mode) at a
slight disadvantage.

To allow use of the 'back-to-bootrom' feature on new devices (e.g. the
RK3368), this commit adds an implementation for AArch64.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/mach-rockchip/save_boot_param.S | 37 ++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/arch/arm/mach-rockchip/save_boot_param.S b/arch/arm/mach-rockchip/save_boot_param.S
index 5e6c8db..945a9dd 100644
--- a/arch/arm/mach-rockchip/save_boot_param.S
+++ b/arch/arm/mach-rockchip/save_boot_param.S
@@ -1,11 +1,47 @@
 /*
  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
  *
  * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #include <linux/linkage.h>
 
+#if defined(CONFIG_ARM64)
+.globl	SAVE_SP_ADDR
+SAVE_SP_ADDR:
+	.quad 0
+
+ENTRY(save_boot_params)
+	sub	sp, sp, #0x100
+	stp	x29, x30, [sp, #0x50]
+	stp	x27, x28, [sp, #0x40]
+	stp	x25, x26, [sp, #0x30]
+	stp	x23, x24, [sp, #0x20]
+	stp	x21, x22, [sp, #0x10]
+	stp	x19, x20, [sp, #0]
+	ldr	x8, =SAVE_SP_ADDR
+	mov	x9, sp
+	str	x9, [x8]
+	b	save_boot_params_ret  /* back to my caller */
+ENDPROC(save_boot_params)
+
+.globl _back_to_bootrom_s
+ENTRY(_back_to_bootrom_s)
+	ldr	x0, =SAVE_SP_ADDR
+	ldr	x0, [x0]
+	mov	sp, x0
+	ldp	x29, x30, [sp, #0x50]
+	ldp	x27, x28, [sp, #0x40]
+	ldp	x25, x26, [sp, #0x30]
+	ldp	x23, x24, [sp, #0x20]
+	ldp	x21, x22, [sp, #0x10]
+	ldp	x19, x20, [sp]
+	add	sp, sp, #0x100
+	mov	x0, xzr
+	ret
+ENDPROC(_back_to_bootrom_s)
+#else
 .globl	SAVE_SP_ADDR
 SAVE_SP_ADDR:
 	.word 0
@@ -30,3 +66,4 @@ ENTRY(_back_to_bootrom_s)
 	mov	r0, #0
 	pop	{r1-r12, pc}
 ENDPROC(_back_to_bootrom_s)
+#endif
-- 
2.1.4