[U-Boot] [PATCH] omap3evm: Update board and defconfig files

[Derald Woods]

On Thu, Aug 3, 2017 at 6:31 AM, Tom Rini <trini at konsulko.com> wrote:

> On Wed, Aug 02, 2017 at 10:00:06PM -0500, Derald D. Woods wrote:
>
> > This patch brings the OMAP3 EVM to a bootable state, on master, as of
> > v2017.09-rc1.
> >
> > Signed-off-by: Derald D. Woods <woods.technical at gmail.com>
>
> Reviewed-by: Tom Rini <trini at konsulko.com>
>
> Thanks.  Since you have one of these boards, would you like to take over
> maintainership of it?


​Yes. I do have this board, with the OMAP3530 processor module, and will be
able to test releases.

On a side note, I recently posted the following:

http://u-boot.10912.n7.nabble.com/PATCH-arm-omap-Fix-get-device-type-for-OMAP34XX-td300937.html#a300993

I verified the small patch with omap3evm, beagleboard(revc4), and overo.
CPU information can be directly read, as it was previously. Is there some
consistent road-map for SRAM usage for OMAP34XX specifically?

Derald



> That means booting it at least once every 2
> months, ideally (at least on the final -rc before release, which is
> pretty consistently scheduled) to catch bugs like this.  Thanks again!
>
--
> Tom
>

​​