[U-Boot] [PATCH v2 09/42] Kconfig: Drop CONFIG_CMD_PCA953X_INFO
Simon Glass
sjg at chromium.org
Fri Aug 4 22:34:33 UTC 2017
It does not seem worth having an option to enable another sub-command in
this legacy driver. Drop this option so that the sub-command is always
available.
Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
Changes in v2: None
README | 1 -
drivers/gpio/pca953x.c | 8 --------
include/configs/cl-som-am57x.h | 1 -
include/configs/cm_t335.h | 1 -
include/configs/ot1200.h | 1 -
include/configs/snapper9260.h | 3 ---
include/configs/strider.h | 1 -
include/configs/xilinx_zynqmp_zcu102.h | 1 -
include/configs/xpedite517x.h | 1 -
include/configs/xpedite520x.h | 1 -
include/configs/xpedite537x.h | 1 -
include/configs/xpedite550x.h | 1 -
scripts/config_whitelist.txt | 1 -
13 files changed, 22 deletions(-)
diff --git a/README b/README
index 5f916c8d8e..addbf306f1 100644
--- a/README
+++ b/README
@@ -812,7 +812,6 @@ The following options need to be configured:
CONFIG_CMD_MII * MII utility commands
CONFIG_CMD_NET bootp, tftpboot, rarpboot
CONFIG_CMD_NFS NFS support
- CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command
CONFIG_CMD_PCI * pciinfo
CONFIG_CMD_PCMCIA * PCMCIA support
CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 238e02805c..d1c1ae1411 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -143,7 +143,6 @@ int pca953x_get_val(uint8_t chip)
}
#ifdef CONFIG_CMD_PCA953X
-#ifdef CONFIG_CMD_PCA953X_INFO
/*
* Display pca953x information
*/
@@ -193,16 +192,13 @@ static int pca953x_info(uint8_t chip)
return 0;
}
-#endif /* CONFIG_CMD_PCA953X_INFO */
cmd_tbl_t cmd_pca953x[] = {
U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""),
U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""),
U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""),
U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""),
-#ifdef CONFIG_CMD_PCA953X_INFO
U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""),
-#endif
};
int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -231,13 +227,11 @@ int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;
switch ((long)c->cmd) {
-#ifdef CONFIG_CMD_PCA953X_INFO
case PCA953X_CMD_INFO:
ret = pca953x_info(chip);
if (ret)
ret = CMD_RET_FAILURE;
break;
-#endif
case PCA953X_CMD_DEVICE:
if (argc == 3)
@@ -287,10 +281,8 @@ U_BOOT_CMD(
"pca953x gpio access",
"device [dev]\n"
" - show or set current device address\n"
-#ifdef CONFIG_CMD_PCA953X_INFO
"pca953x info\n"
" - display info for current chip\n"
-#endif
"pca953x output pin 0|1\n"
" - set pin as output and drive low or high\n"
"pca953x invert pin 0|1\n"
diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h
index 8f3721cbfc..b9d6454887 100644
--- a/include/configs/cl-som-am57x.h
+++ b/include/configs/cl-som-am57x.h
@@ -74,7 +74,6 @@
CONFIG_SYS_SCSI_MAX_LUN)
/* PCA9555 GPIO expander support */
#define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
diff --git a/include/configs/cm_t335.h b/include/configs/cm_t335.h
index 7331d4fe1f..bc52aae251 100644
--- a/include/configs/cm_t335.h
+++ b/include/configs/cm_t335.h
@@ -163,7 +163,6 @@
* First select the I2C0 bus with "i2c dev 0", then use "pca953x" command.
*/
#define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x26
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x26, 16} }
#endif /* CONFIG_SPL_BUILD */
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index 1287282270..8a1a49653c 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -31,7 +31,6 @@
#define CONFIG_PCA953X
#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} }
-#define CONFIG_CMD_PCA953X_INFO
/* I2C Configs */
#define CONFIG_SYS_I2C
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 8ff0fa3412..e7828a5036 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -136,7 +136,4 @@
/* U-Boot memory settings */
#define CONFIG_SYS_MALLOC_LEN (1 << 20)
-/* Command line configuration */
-#define CONFIG_CMD_PCA953X_INFO
-
#endif /* __CONFIG_H */
diff --git a/include/configs/strider.h b/include/configs/strider.h
index 507a41462b..aa7f15389c 100644
--- a/include/configs/strider.h
+++ b/include/configs/strider.h
@@ -301,7 +301,6 @@
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
#define CONFIG_PCA953X /* NXP PCA9554 */
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x24, 16}, {0x25, 16}, {0x26, 16}, \
{0x3c, 8}, {0x3d, 8}, {0x3e, 8} }
diff --git a/include/configs/xilinx_zynqmp_zcu102.h b/include/configs/xilinx_zynqmp_zcu102.h
index 52278f1885..85f78ba43b 100644
--- a/include/configs/xilinx_zynqmp_zcu102.h
+++ b/include/configs/xilinx_zynqmp_zcu102.h
@@ -38,7 +38,6 @@
#define CONFIG_SYS_I2C_ZYNQ
#define CONFIG_PCA953X
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR}
diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index c27433787f..fe1c14b7ee 100644
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -484,7 +484,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
/*
* Command configuration.
*/
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_REGINFO
diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h
index fa8f1d89f5..8a7cf7f711 100644
--- a/include/configs/xpedite520x.h
+++ b/include/configs/xpedite520x.h
@@ -287,7 +287,6 @@
/*
* Command configuration.
*/
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_REGINFO
diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index 2a35bf0972..5d59bfe28b 100644
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -337,7 +337,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
/*
* Command configuration.
*/
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_REGINFO
diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h
index c31f83d2e1..6bf7dc3e67 100644
--- a/include/configs/xpedite550x.h
+++ b/include/configs/xpedite550x.h
@@ -336,7 +336,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
/*
* Command configuration.
*/
-#define CONFIG_CMD_PCA953X_INFO
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PCI_ENUM
#define CONFIG_CMD_REGINFO
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8993ee89fb..2f1d669114 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -296,7 +296,6 @@ CONFIG_CM922T_XA10
CONFIG_CMDLINE_EDITING
CONFIG_CMDLINE_PS_SUPPORT
CONFIG_CMDLINE_TAG
-CONFIG_CMD_PCA953X_INFO
CONFIG_CMD_PCI
CONFIG_CMD_PCI_ENUM
CONFIG_CMD_PCMCIA
--
2.14.0.rc1.383.gd1ce394fe2-goog
More information about the U-Boot
mailing list