[U-Boot] [PATCH 0/2] ARM: OMAP5: Add AVS support for ES2.0
nm at ti.com
Sat Aug 5 02:42:07 UTC 2017
OMAP5 went into production with AVS Class0 Vs pre-production configuration of
AVS 1.5. Most of the current "in-the-wild" OMAP5 uEVMs are based on pre-production
samples, however, the support for "production configuration" helps platforms
such as pyra-handheld.
This original issue was reported by zmatt on #beagle freenode IRC
channel, However, I donot have a email address to attribute to him/her
:( (zmatt, if you are on the list, feel free to add your reported
Series verified (with scope) on:
a) 720-2644-001 OMAP5UEVM with production sample.
b) 750-2628-222(A) UEVM5432G-02 with pre-production sample.
build tested with:
buildman -b omap5-evm omap5
Nishanth Menon (2):
ARM: OMAP5: Remove OPP_LOW Definitions for ES2.0
ARM: OMAP5: Enable support for AVS0 for OMAP5 production devices
arch/arm/include/asm/arch-omap5/clock.h | 17 +++++++++++++++--
arch/arm/include/asm/arch-omap5/omap.h | 4 ++--
arch/arm/mach-omap2/omap5/abb.c | 4 ++--
arch/arm/mach-omap2/omap5/hw_data.c | 9 +++++++++
4 files changed, 28 insertions(+), 6 deletions(-)
More information about the U-Boot