[U-Boot] [PATCH 6/6 v3] x86: Add defconfig for theadorable-x86-conga with PCIe x4 blobs

Stefan Roese sr at denx.de
Sun Aug 6 05:55:38 UTC 2017


Hi Bin,

On 06.08.2017 02:49, Bin Meng wrote:
> On Sun, Aug 6, 2017 at 12:49 AM, Stefan Roese <sr at denx.de> wrote:
>> This defconfig uses the PCIe x4 binary blobs from the congatec BIOS.
>>
>> Signed-off-by: Stefan Roese <sr at denx.de>
>> Cc: Simon Glass <sjg at chromium.org>
>> Cc: Bin Meng <bmeng.cn at gmail.com>
>> ---
>> v3:
>> - New patch
>>
>>   board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS |  1 +
>>   ...eadorable-x86-conga-qa3-e3845-pcie-x4_defconfig | 59 ++++++++++++++++++++++
>>   2 files changed, 60 insertions(+)
>>   create mode 100644 configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
>>
>> diff --git a/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
>> index 6e065590ab..cceda4f49f 100644
>> --- a/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
>> +++ b/board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS
>> @@ -7,4 +7,5 @@ F:      include/configs/theadorable-x86-conga-qa3-e3845.h
>>   F:     configs/conga-qeval20-qa3-e3845_defconfig
>>   F:     configs/conga-qeval20-qa3-e3845-internal-uart_defconfig
>>   F:     configs/theadorable-x86-conga-qa3-e3845_defconfig
>> +F:     configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
>>   F:     arch/x86/dts/conga-qeval20-qa3-e3845.dts
>> diff --git a/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
>> new file mode 100644
>> index 0000000000..2bfff393df
>> --- /dev/null
>> +++ b/configs/theadorable-x86-conga-qa3-e3845-pcie-x4_defconfig
>> @@ -0,0 +1,59 @@
>> +CONFIG_X86=y
>> +CONFIG_VENDOR_CONGATEC=y
>> +CONFIG_TARGET_THEADORABLE_X86_CONGA_QA3_E3845=y
>> +CONFIG_DEFAULT_DEVICE_TREE="conga-qeval20-qa3-e3845"
>> +CONFIG_INTERNAL_UART=y
>> +CONFIG_FLASH_DESCRIPTOR_FILE="descriptor-pcie-x4.bin"
>> +CONFIG_SMP=y
>> +CONFIG_HAVE_VGA_BIOS=y
>> +CONFIG_VGA_BIOS_ADDR=0xfffa0000
>> +CONFIG_GENERATE_PIRQ_TABLE=y
>> +CONFIG_GENERATE_MP_TABLE=y
>> +CONFIG_GENERATE_ACPI_TABLE=y
>> +CONFIG_HAVE_ACPI_RESUME=y
>> +CONFIG_SEABIOS=y
>> +CONFIG_FIT=y
>> +CONFIG_FIT_SIGNATURE=y
>> +CONFIG_BOOTSTAGE=y
>> +CONFIG_BOOTSTAGE_REPORT=y
>> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
>> +CONFIG_HUSH_PARSER=y
>> +CONFIG_CMD_CPU=y
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_FLASH is not set
>> +CONFIG_CMD_MMC=y
>> +CONFIG_CMD_SF=y
>> +CONFIG_CMD_SPI=y
>> +CONFIG_CMD_I2C=y
>> +CONFIG_CMD_USB=y
>> +CONFIG_CMD_GPIO=y
>> +# CONFIG_CMD_SETEXPR is not set
>> +CONFIG_CMD_DHCP=y
>> +# CONFIG_CMD_NFS is not set
>> +CONFIG_CMD_PING=y
>> +CONFIG_CMD_TIME=y
>> +CONFIG_CMD_BOOTSTAGE=y
>> +CONFIG_CMD_EXT2=y
>> +CONFIG_CMD_EXT4=y
>> +CONFIG_CMD_EXT4_WRITE=y
>> +CONFIG_CMD_FAT=y
>> +CONFIG_CMD_FS_GENERIC=y
>> +CONFIG_ISO_PARTITION=y
>> +CONFIG_AMIGA_PARTITION=y
>> +CONFIG_EFI_PARTITION=y
>> +CONFIG_REGMAP=y
>> +CONFIG_SYSCON=y
>> +CONFIG_CPU=y
>> +CONFIG_DM_I2C=y
>> +CONFIG_SYS_I2C_INTEL=y
>> +CONFIG_WINBOND_W83627=y
>> +CONFIG_SPI_FLASH_GIGADEVICE=y
>> +CONFIG_SPI_FLASH_MACRONIX=y
>> +CONFIG_SPI_FLASH_SPANSION=y
>> +CONFIG_SPI_FLASH_WINBOND=y
> 
> Please check http://patchwork.ozlabs.org/patch/795356/

Same as before, I'll remove Gigadevice and Macronix support
for now to have the selection consistent.

Thanks,
Stefan


More information about the U-Boot mailing list